[FAB-3160] Provide config-relative path feature

Introduction
======================
The primary goal of this patch is to create the notion of a
"config-relative" path reference.  For example, a configuration file
"/etc/foo/bar.yaml" that contains a key "bat" with a value
"baz/blaz/blamo" can be used to specify that "baz/blaz/blamo" should
be considered relative to the configuration file itself.  In this case,
it would be expected to be found at /etc/foo/baz/blaz/blamo.  FAB-2037
does a much more thorough job of explaining the rationale on why
config-relative is considered important/good-form.

This is in stark contrast to what we have today, which is a jumbled
mess of assumed GOPATH relative, CWD relative, ENVVAR absolute and
sometimes even ENVVAR relative.  Therefore, an additional positive
side-effect of this endeavor is that this patch also substantially
cleans up some technical debt that had been accumulating in the tree
for some time related to ad-hoc pathing, DRY violations, and just
general inconsistencies in how configuration files were managed.

Design Details
==========================
This patch refactors the basic configuration system into the notion of
a tree rooted at a configuration-path.  By default, this path is
$GOROOT/..../fabric/sampleconfig during dev/test and
/etc/hyperledger/fabric during runtime.  The root may be overridden
at any time by specifying the environment variable FABRIC_CFG_PATH.
(Note that this variable unifies and replaces the former PEER_CFG_PATH
and ORDERER_CFG_PATH).

The dev/test environment will operate out of the ./fabric/sampleconfig
configuration root.  The build-system will package that root into
/etc/hyperledger/fabric in the runtime context with the intention of
the end-user/admin/deployer replacing parts or all of the sampleconfig
to suit their application.

Since configuration-relative paths are now possible, the configuration
files may reference other relative files and they will behave
appropriately regardless of the context in which they are executed.
For example, consider the files ./sampleconfig/tls/server.[crt|key].
A configuration file may contain a key "tls/server.key" and the system
will properly resolve this relative file even at runtime. This is (IMO)
far more natural than assuming a path is relative to the CWD of where
the command is executed, which is how most of the system behaves today
(or requires awkward and very specific ENVVAR overrides).

This will be conducive to something like a package-installer
(e.g. RPM/DEB) or a docker environment to augment/replace elements
of the configuration root and to freely move the configuration around
as the package/deployer sees fit.

As an example, a deployment on Kubernetes might opt to volume mount
/etc/hyperledger/fabric to replace the entire config, or it might just use
a secrets mount on /etc/hyperledger/fabric/peer/tls.  An RPM packager
might opt to install the configuration files in the default
/etc/hyperledger/fabric, whereas an unprivledged user might install them
in ~/hyperledger.  The point is, it shouldn't matter where they are and the
user shouldn't need a PhD in CORE_* variables to get it to work.

This is part of an overall effort to improve the user-experience as we
march towards a v1.0 release.

Fixes FAB-3169 as part of FAB-2037

Change-Id: I5f47f554c2f956ec2e1afebd9bd82b0bbb62892a
Signed-off-by: Greg Haskins <gregory.haskins@gmail.com>

Author: ghaskins

Makefile

@@ -75,7 +75,6 @@ K := $(foreach exec,$(EXECUTABLES),\
 GOSHIM_DEPS = $(shell ./scripts/goListFiles.sh $(PKGNAME)/core/chaincode/shim)
 JAVASHIM_DEPS =  $(shell git ls-files core/chaincode/shim/java)
 PROTOS = $(shell git ls-files *.proto | grep -v vendor)
-MSP_SAMPLECONFIG = $(shell git ls-files msp/sampleconfig/*)
 PROJECT_FILES = $(shell git ls-files)
 IMAGES = peer orderer ccenv javaenv buildenv testenv zookeeper kafka couchdb
 RELEASE_PLATFORMS = windows-amd64 darwin-amd64 linux-amd64 linux-ppc64le linux-s390x
@@ -208,21 +207,14 @@ build/image/javaenv/payload:    build/javashim.tar.bz2 \
 				build/protos.tar.bz2 \
 				settings.gradle
 build/image/peer/payload:       build/docker/bin/peer \
-				peer/core.yaml \
-				build/msp-sampleconfig.tar.bz2 \
-				common/configtx/tool/configtx.yaml
+				build/sampleconfig.tar.bz2
 build/image/orderer/payload:    build/docker/bin/orderer \
-				build/msp-sampleconfig.tar.bz2 \
-				orderer/orderer.yaml \
-				common/configtx/tool/configtx.yaml
+				build/sampleconfig.tar.bz2
 build/image/buildenv/payload:   build/gotools.tar.bz2 \
 				build/docker/gotools/bin/protoc-gen-go
 build/image/testenv/payload:    build/docker/bin/orderer \
-				orderer/orderer.yaml \
-				common/configtx/tool/configtx.yaml \
 				build/docker/bin/peer \
-				peer/core.yaml \
-				build/msp-sampleconfig.tar.bz2 \
+				build/sampleconfig.tar.bz2 \
 				images/testenv/install-softhsm2.sh
 build/image/zookeeper/payload:  images/zookeeper/docker-entrypoint.sh
 build/image/kafka/payload:      images/kafka/docker-entrypoint.sh \
@@ -261,9 +253,11 @@ build/goshim.tar.bz2: $(GOSHIM_DEPS)
 	@echo "Creating $@"
 	@tar -jhc -C $(GOPATH)/src $(patsubst $(GOPATH)/src/%,%,$(GOSHIM_DEPS)) > $@
 
+build/sampleconfig.tar.bz2:
+	(cd sampleconfig && tar -jc *) > $@
+
 build/javashim.tar.bz2: $(JAVASHIM_DEPS)
 build/protos.tar.bz2: $(PROTOS)
-build/msp-sampleconfig.tar.bz2: $(MSP_SAMPLECONFIG)
 
 build/%.tar.bz2:
 	@echo "Creating $@"

bddtests/docker-compose-next-4.yml

@@ -7,7 +7,6 @@ services:
       file: docker-compose-orderer-solo.yml
       service: orderer0
     environment:
-      - ORDERER_GENERAL_LOCALMSPDIR=${ORDERER0_ORDERER_GENERAL_LOCALMSPDIR}
       - ORDERER_GENERAL_LOCALMSPID=${ORDERER0_ORDERER_GENERAL_LOCALMSPID}
       - ORDERER_GENERAL_TLS_ENABLED=true
       - ORDERER_GENERAL_TLS_PRIVATEKEY=${ORDERER0_ORDERER_GENERAL_TLS_PRIVATEKEY}
@@ -24,7 +23,6 @@ services:
       - CORE_PEER_GOSSIP_BOOTSTRAP=peer1:7051
       - CORE_PEER_PROFILE_ENABLED=true
       - CORE_PEER_COMMITTER_LEDGER_ORDERER=orderer0:7050
-      - CORE_PEER_MSPCONFIGPATH=${PEER0_CORE_PEER_MSPCFGPATH}
       - CORE_PEER_LOCALMSPID=${PEER0_CORE_PEER_LOCALMSPID}
       - CORE_PEER_TLS_CERT_FILE=${PEER0_CORE_PEER_TLS_CERT_FILE}
       - CORE_PEER_TLS_KEY_FILE=${PEER0_CORE_PEER_TLS_KEY_FILE}
@@ -44,7 +42,6 @@ services:
       - CORE_PEER_ID=vp1
       - CORE_PEER_GOSSIP_BOOTSTRAP=peer0:7051
       - CORE_PEER_COMMITTER_LEDGER_ORDERER=orderer0:7050
-      - CORE_PEER_MSPCONFIGPATH=${PEER1_CORE_PEER_MSPCFGPATH}
       - CORE_PEER_LOCALMSPID=${PEER1_CORE_PEER_LOCALMSPID}
       - CORE_PEER_TLS_CERT_FILE=${PEER1_CORE_PEER_TLS_CERT_FILE}
       - CORE_PEER_TLS_KEY_FILE=${PEER1_CORE_PEER_TLS_KEY_FILE}
@@ -62,7 +59,6 @@ services:
       - CORE_PEER_ID=vp2
       - CORE_PEER_GOSSIP_BOOTSTRAP=peer3:7051
       - CORE_PEER_COMMITTER_LEDGER_ORDERER=orderer0:7050
-      - CORE_PEER_MSPCONFIGPATH=${PEER2_CORE_PEER_MSPCFGPATH}
       - CORE_PEER_LOCALMSPID=${PEER2_CORE_PEER_LOCALMSPID}
       - CORE_PEER_TLS_CERT_FILE=${PEER2_CORE_PEER_TLS_CERT_FILE}
       - CORE_PEER_TLS_KEY_FILE=${PEER2_CORE_PEER_TLS_KEY_FILE}
@@ -80,7 +76,6 @@ services:
       - CORE_PEER_ID=vp3
       - CORE_PEER_GOSSIP_BOOTSTRAP=peer2:7051
       - CORE_PEER_COMMITTER_LEDGER_ORDERER=orderer0:7050
-      - CORE_PEER_MSPCONFIGPATH=${PEER3_CORE_PEER_MSPCFGPATH}
       - CORE_PEER_LOCALMSPID=${PEER3_CORE_PEER_LOCALMSPID}
       - CORE_PEER_TLS_CERT_FILE=${PEER3_CORE_PEER_TLS_CERT_FILE}
       - CORE_PEER_TLS_KEY_FILE=${PEER3_CORE_PEER_TLS_KEY_FILE}

bddtests/orderer-3-kafka-1.yml

@@ -5,7 +5,6 @@ services:
         service: orderer0
     image: hyperledger/fabric-testenv-orderer
     environment:
-      - ORDERER_GENERAL_LOCALMSPDIR=${ORDERER1_ORDERER_GENERAL_LOCALMSPDIR}
       - ORDERER_GENERAL_LOCALMSPID=${ORDERER1_ORDERER_GENERAL_LOCALMSPID}
       - ORDERER_GENERAL_TLS_PRIVATEKEY=${ORDERER1_ORDERER_GENERAL_TLS_PRIVATEKEY}
       - ORDERER_GENERAL_TLS_CERTIFICATE=${ORDERER1_ORDERER_GENERAL_TLS_CERTIFICATE}
@@ -19,7 +18,6 @@ services:
         service: orderer0
     image: hyperledger/fabric-testenv-orderer
     environment:
-      - ORDERER_GENERAL_LOCALMSPDIR=${ORDERER2_ORDERER_GENERAL_LOCALMSPDIR}
       - ORDERER_GENERAL_LOCALMSPID=${ORDERER2_ORDERER_GENERAL_LOCALMSPID}
       - ORDERER_GENERAL_TLS_PRIVATEKEY=${ORDERER2_ORDERER_GENERAL_TLS_PRIVATEKEY}
       - ORDERER_GENERAL_TLS_CERTIFICATE=${ORDERER2_ORDERER_GENERAL_TLS_CERTIFICATE}

bddtests/regression/go/ote/README.md

@@ -84,8 +84,8 @@ Check your Docker and Docker-Compose versions with the following commands:
 ```
 
 ### Environment Variables for configuration
-Find default values of all variables in hyperledger/fabric/orderer/orderer.yaml
-and hyperledger/fabric/peer/core.yaml.
+Find default values of all variables in hyperledger/fabric/sampleconfig/orderer.yaml
+and hyperledger/fabric/sampleconfig/core.yaml.
 ```
   CONFIGTX_ORDERER_ORDERERTYPE                 solo
   CONFIGTX_ORDERER_BATCHSIZE_MAXMESSAGECOUNT   10

bddtests/regression/go/ote/network.json

@@ -65,9 +65,6 @@
                  "zookeeper",
                  "kafka0"
             ],
-            "volumes": [
-                 "/opt/gopath/src/github.com/hyperledger/fabric/msp/sampleconfig:/etc/hyperledger/msp/sampleconfig"
-            ],
             "container_name": "orderer0",
             "networks": [
                  "bridge"
@@ -110,7 +107,6 @@
             },
             "working_dir": "/opt/gopath/src/github.com/hyperledger/fabric/peer",
             "volumes": [
-                  "/opt/gopath/src/github.com/hyperledger/fabric/msp/sampleconfig:/etc/hyperledger/msp/sampleconfig",
                   "/var/run:/host/var/run/"
             ],
             "command": "peer node start",

bddtests/regression/go/ote/ote.go

@@ -20,7 +20,7 @@ package main
 // ======================
 //
 // This file ote.go contains main(), for executing from command line
-// using environment variables to override those in orderer/orderer.yaml
+// using environment variables to override those in sampleconfig/orderer.yaml
 // or to set OTE test configuration parameters.
 //
 // Function ote() is called by main after reading environment variables,

bddtests/steps/endorser_util.py

@@ -157,7 +157,7 @@ def getExample02ChaincodeSpec():
 def _createDeploymentSpecAsFile(ccSpec, outputPath):
     '''peer chaincode package -n myCC -c '{"Args":["init","a","100","b","200"]}' -p github.com/hyperledger/fabric/examples/chaincode/go/chaincode_example02 --logging-level=DEBUG test.file'''
     myEnv = os.environ.copy()
-    myEnv['CORE_PEER_MSPCONFIGPATH'] = "./../msp/sampleconfig"
+    myEnv['CORE_PEER_MSPCONFIGPATH'] = "./../sampleconfig/msp"
     nameArgs = ["-n", ccSpec.chaincode_id.name]
     ctorArgs = ["-c", json.dumps({'Args' : [item for item in ccSpec.input.args]})]
     pathArgs = ["-p", ccSpec.chaincode_id.path]

common/config/msp/config_test.go

@@ -19,13 +19,16 @@ package msp
 import (
 	"testing"
 
+	"github.com/hyperledger/fabric/core/config"
 	"github.com/hyperledger/fabric/msp"
 	mspprotos "github.com/hyperledger/fabric/protos/msp"
 	"github.com/stretchr/testify/assert"
 )
 
 func TestMSPConfigManager(t *testing.T) {
-	conf, err := msp.GetLocalMspConfig("../../../msp/sampleconfig/", nil, "DEFAULT")
+	mspDir, err := config.GetDevMspDir()
+	assert.NoError(t, err)
+	conf, err := msp.GetLocalMspConfig(mspDir, nil, "DEFAULT")
 	assert.NoError(t, err)
 
 	// test success:

common/configtx/test/helper.go

@@ -17,16 +17,14 @@ limitations under the License.
 package test
 
 import (
-	"os"
-	"path/filepath"
-
 	"github.com/hyperledger/fabric/common/config"
 	configtxmsp "github.com/hyperledger/fabric/common/config/msp"
 	"github.com/hyperledger/fabric/common/configtx"
 	genesisconfig "github.com/hyperledger/fabric/common/configtx/tool/localconfig"
 	"github.com/hyperledger/fabric/common/configtx/tool/provisional"
 	"github.com/hyperledger/fabric/common/flogging"
 	"github.com/hyperledger/fabric/common/genesis"
+	cf "github.com/hyperledger/fabric/core/config"
 	"github.com/hyperledger/fabric/msp"
 	cb "github.com/hyperledger/fabric/protos/common"
 	mspproto "github.com/hyperledger/fabric/protos/msp"
@@ -39,33 +37,13 @@ const (
 	AcceptAllPolicyKey = "AcceptAllPolicy"
 )
 
-func dirExists(path string) bool {
-	_, err := os.Stat(path)
-	return err == nil
-}
-
 func getConfigDir() string {
-	mspSampleConfig := "/msp/sampleconfig"
-	peerPath := filepath.Join(os.Getenv("PEER_CFG_PATH"), mspSampleConfig)
-	ordererPath := filepath.Join(os.Getenv("ORDERER_CFG_PATH"), mspSampleConfig)
-	switch {
-	case dirExists(peerPath):
-		return peerPath
-	case dirExists(ordererPath):
-		return ordererPath
-	}
-
-	gopath := os.Getenv("GOPATH")
-	for _, p := range filepath.SplitList(gopath) {
-		samplePath := filepath.Join(p, "src/github.com/hyperledger/fabric", mspSampleConfig)
-		if !dirExists(samplePath) {
-			continue
-		}
-		return samplePath
+	mspDir, err := cf.GetDevMspDir()
+	if err != nil {
+		logger.Panicf("Could not find genesis.yaml, try setting GOPATH correctly")
 	}
 
-	logger.Panicf("Could not find genesis.yaml, try setting PEER_CFG_PATH, ORDERER_CFG_PATH, or GOPATH correctly")
-	return ""
+	return mspDir
 }
 
 // MakeGenesisBlock creates a genesis block using the test templates for the given chainID

common/configtx/test/helper_test.go

@@ -21,6 +21,7 @@ import (
 	"path/filepath"
 	"testing"
 
+	"github.com/hyperledger/fabric/core/config"
 	"github.com/hyperledger/fabric/msp"
 	logging "github.com/op/go-logging"
 )
@@ -43,10 +44,15 @@ func TestMakeGenesisBlock(t *testing.T) {
 
 func TestMakeGenesisBlockFromMSPs(t *testing.T) {
 
+	mspDir, err := config.GetDevMspDir()
+	if err != nil {
+		t.Fatalf("Error getting DevMspDir: %s", err)
+	}
+
 	ordererOrgID := "TestOrdererOrg"
 	appOrgID := "TestAppOrg"
-	appMSPConf, err := msp.GetLocalMspConfig("msp/sampleconfig", nil, appOrgID)
-	ordererMSPConf, err := msp.GetLocalMspConfig("msp/sampleconfig", nil, ordererOrgID)
+	appMSPConf, err := msp.GetLocalMspConfig(mspDir, nil, appOrgID)
+	ordererMSPConf, err := msp.GetLocalMspConfig(mspDir, nil, ordererOrgID)
 	if err != nil {
 		t.Fatalf("Error making genesis block from MSPs: %s", err)
 	}