removed full url links to wiki... why even use full url?!?

Author: blakadder

Arduino-IDE.md

@@ -1,6 +1,6 @@
 ## :red_circle:  Since Tasmota 6.6.0.15 Arduino IDE is not recommended to use for compiling. You will get errors and probably won't be able to compile.
 
-_**Use [Gitpod](https://github.com/arendst/Tasmota/wiki/Gitpod) or [VSC with PlatformIO](https://github.com/arendst/Tasmota/wiki/Visual-Studio-Code) to compile the firmware. Setup is much easier for these IDEs. The Tasmota project is already configured for them.**_
+_**Use [Gitpod](Gitpod) or [VSC with PlatformIO](Visual-Studio-Code) to compile the firmware. Setup is much easier for these IDEs. The Tasmota project is already configured for them.**_
 
 ## Arduino IDE setup and configuration for Tasmota compilation and upload
 

Commands.md

@@ -229,7 +229,7 @@ Command|Parameters
 Latitude<a id="latitude"></a>|`<value>` = set latitude
 Longitude<a id="longitude"></a>|`<value>` = set longitude
 Timers<a id="timers"></a>|Timers control<br>`0` = disable all timers<BR>`1` = enable all timers<BR>`2` = toggle all timers<BR>
-Timer<x\><a id="timer"></a>|Parameters for Timer<x\> where x = `1..16`<BR>`0` = clear parameters for Timer<x\><BR>`1..16` = copy Timer\<y\> parameters to Timer<x\><BR>`{ "name":value ; .. }` = set all or individual parameters using JSON payload with names and values of data pairs from the [table](https://github.com/arendst/Tasmota/wiki/Timers#json-payload-anatomy) 
+Timer<x\><a id="timer"></a>|Parameters for Timer<x\> where x = `1..16`<BR>`0` = clear parameters for Timer<x\><BR>`1..16` = copy Timer\<y\> parameters to Timer<x\><BR>`{ "name":value ; .. }` = set all or individual parameters using JSON payload with names and values of data pairs from the [table](Timers#json-payload-anatomy) 
 
 > [!Note]
 > Information on sensors documented below is transmitted in the Tasmota telemetry message

Compile-your-build.md

@@ -2,7 +2,7 @@ Flash and memory space on an ESP82XX chip is limited and very valuable. Because
 
 To include a feature you need (or build completely customized Tamota) you will have to configure and compile your own version.
 
-First you will need a [development environment](https://github.com/arendst/Tasmota/wiki/Flashing#flashing-and-compiling-from-source) and Tasmota's source code (either [development](https://github.com/arendst/Tasmota/archive/development.zip) or [master](https://github.com/arendst/Tasmota/archive/master.zip) branch).
+First you will need a [development environment](installation/Flashing#flashing-and-compiling-from-source) and Tasmota's source code (either [development](https://github.com/arendst/Tasmota/archive/development.zip) or [master](https://github.com/arendst/Tasmota/archive/master.zip) branch).
 
 **Simplest way to compile is with [GitPod](Gitpod), requires only a web browser.**
 

Configuration-Procedure-for-New-Devices.md

@@ -34,7 +34,7 @@ If your device is similar to the existing built-in module (e.g., a particular MC
 
    _c._ Once you have found which GPIO are connected to each input, change the GPIO setting in the configuration to a `Button<x>` or `Switch<x>` according to your input component or use case. Proper operation may dictate the use regular or inverted (i.e., `Switch<x>i`/`Button<x>i`) settings. For buttons, you may need to determine whether the internal pull-up is used or not. If so, select `Button<x>`_**n**_, where _**n**_ indicates no pull-up.
 
-      - See [Using a physical pushbutton with single press, double press, and hold](https://github.com/arendst/Tasmota/wiki/Rule-cookbook#16-using-an-external-button-with-single-press---double-press-and-hold) to control multiple devices with one button.
+      - See [Using a physical pushbutton with single press, double press, and hold](Rule-cookbook#16-using-an-external-button-with-single-press---double-press-and-hold) to control multiple devices with one button.
 
 4. Once you have determined which GPIO your device uses, set any remaining GPIO to `None (0)`.
    - Save the configuration.

Control-other-devices.md

@@ -24,4 +24,4 @@ setoption11 1
 Taken from the discussion:
 [https://github.com/arendst/Tasmota/issues/200#issuecomment-343756826](https://github.com/arendst/Tasmota/issues/200#issuecomment-343756826)
 
-[Example using Rules](https://github.com/arendst/Tasmota/wiki/Rule-cookbook#16-using-an-external-button-with-single-press---double-press-and-hold)
+[Example using Rules](Rule-cookbook#16-using-an-external-button-with-single-press---double-press-and-hold)

Create-your-own-Firmware-Build-without-IDE.md

@@ -138,7 +138,7 @@ After changing to the working copy, we are ready to go:
 
 ## Configure the sources
 
-Now you may want to configure the sources for your needs, as described at [Upload](https://github.com/arendst/Tasmota/wiki/Upload)
+Now you may want to configure the sources for your needs, as described at [Upload](Upload)
 
 Actually, the sources do build fine right out-of-the box, only it'll be a full build, including all the language localisation and all the build flavours as well, while you are usually interested only in one language and one build flavour only.
 

Esptool.md

@@ -1,6 +1,6 @@
 How to setup and configure Esptool for Tasmota upload.
 
-The information below is for the Python version of esptool - If you want to use the Windows/Linux/OSX(MAC) executable version of esptool (as would be included in Arduino ESP8266 cores) then please go to the [esptool executable (non-python)](https://github.com/arendst/Tasmota/wiki/Esptool#esptool-executable-windows--linux) section at the bottom.
+The information below is for the Python version of esptool - If you want to use the Windows/Linux/OSX(MAC) executable version of esptool (as would be included in Arduino ESP8266 cores) then please go to the [esptool executable (non-python)](Esptool#esptool-executable-windows--linux) section at the bottom.
 
 ## Download Esptool
 If you do not have an installed copy of Python 2.x or 3.x download and install it from https://www.python.org/.

Expanding-Sonoffs.md

@@ -8,4 +8,4 @@ Fast power cycle device recovery is implemented for situations where a device ca
 1. Cut power from the device completely for 30 seconds
 2. Power the device on and off three times with intervals lower than 10 seconds and leave it on after fourth time
 3. Fast power cycle device recovery should activate and the device should be reset to firmware defaults
-   > If you flashed a precompiled binary you can [reconfigure](https://github.com/arendst/Tasmota/wiki/Initial-Configuration#configure-wi-fi) the device using the web UI.
+   > If you flashed a precompiled binary you can [reconfigure](Initial-Configuration#configure-wi-fi) the device using the web UI.

Fast-power-cycle-device-recovery.md

@@ -147,5 +147,5 @@ This is how it looks in real-life 😆
 # That’s it :smiley:
 
 Sources:  
-[Flashing commands](https://github.com/arendst/Tasmota/wiki/Esptool)  
+[Flashing commands](Esptool)  
 https://spellfoundry.com/2016/05/29/configuring-gpio-serial-port-raspbian-jessie-including-pi-3/