config

[param]
# CPU mode or GPU mode
use_gpu = 1

# GPU device number (doesn't matter for CPU mode)
GPUdeviceNumber = 0

# Select model (default: 1)
modelID = 1

# Look in matlab counterpart for explanation thre 1,2,3 are threshold
octave = 3
starting_range = 0.8
ending_range = 2
scale_search = 0.5, 1.0, 1.5, 2.0 # 0.3, 0.6, 0.9, 1.2, 1.5, 1.8, 2.2, 2.5
thre1 = 0.2 # keypoint threshold
thre2 = 0.2 # limb threshold
thre3 = 0.5
connect_ration = 0.9 # limb上连接点的响应一致性的要求
min_num = 4
mid_num = 10
len_rate = 4  # 允许的新加入的limb最大长度倍数
connection_tole = 0.85 # the tolerance of merging the disjoint persons
crop_ratio = 2.5
bbox_ratio = 0.25

[models]
## don't edit this part

[[1]]
caffemodel = './model/_trained_COCO/pose_iter_440000.caffemodel'
deployFile = './model/_trained_COCO/pose_deploy.prototxt'
description = 'COCO Pose56 Two-level Linevec'
boxsize = 368  # 368
padValue = 128
np = 12
stride = 8
part_str = [nose, neck, Rsho, Relb, Rwri, Lsho, Lelb, Lwri, Rhip, Rkne, Rank, Lhip, Lkne, Lank, Leye, Reye, Lear, Rear, pt19]