Halide and CMake

This is a comprehensive guide to the three main usage stories of the Halide CMake build.

Compiling or packaging Halide from source.
Building Halide programs using the official CMake package.
Contributing to Halide and updating the build files.

The following sections cover each in detail.

Getting started

This section covers installing a recent version of CMake and the correct dependencies for building and using Halide. If you have not used CMake before, we strongly suggest reading through the CMake documentation first.

Installing CMake

Halide requires at least version 3.22, which was released in November 2021. Fortunately, getting a recent version of CMake couldn't be easier, and there are multiple good options on any system to do so. Generally, one should always have the most recent version of CMake installed system-wide. CMake is committed to backwards compatibility and even the most recent release can build projects over a decade old.

Cross-platform

The Python package manager pip3 has the newest version of CMake at all times. This might be the most convenient method since Python 3 is an optional dependency for Halide, anyway.

$ pip3 install --upgrade cmake

See the PyPI website for more details.

Windows

On Windows, there are three primary methods for installing an up-to-date CMake:

If you have Visual Studio 2019 installed, you can get CMake 3.17 through the Visual Studio installer. This is the recommended way of getting CMake if you are able to use Visual Studio 2019. See Microsoft's documentation for more details.
If you use Chocolatey, its CMake package is kept up to date. It should be as simple as choco install cmake.
Otherwise, you should install CMake from Kitware's website.

macOS

On macOS, the Homebrew CMake package is kept up to date. Simply run:

$ brew update
$ brew install cmake

to install the newest version of CMake. If your environment prevents you from installing Homebrew, the binary release on Kitware's website is also a viable option.

Ubuntu Linux

There are a few good ways to install a modern CMake on Ubuntu:

If you're on Ubuntu Linux 22.04 (Jammy Jellyfish), then simply running sudo apt install cmake will get you CMake 3.22.
If you are on an older Ubuntu release or would like to use the newest CMake, try installing via the snap store: snap install cmake. Be sure you do not already have cmake installed via APT. The snap package automatically stays up to date.
For older versions of Debian, Ubuntu, Mint, and derivatives, Kitware provides an APT repository with up-to-date releases. Note that this is still useful for Ubuntu 20.04 because it will remain up to date.
If all else fails, you might need to build CMake from source (eg. on old Ubuntu versions running on ARM). In that case, follow the directions posted on Kitware's website.

For other Linux distributions, check with your distribution's package manager or use pip as detailed above. Snap packages might also be available.

Note: On WSL 1, the snap service is not available; in this case, prefer to use the APT repository. On WSL 2, all methods are available.

Installing dependencies

We generally recommend using a package manager to fetch Halide's dependencies. Except where noted, we recommend using vcpkg on Windows, Homebrew on macOS, and APT on Ubuntu 20.04 LTS.

Only LLVM and Clang are absolutely required to build Halide. Halide always supports three LLVM versions: the current major version, the previous major version, and trunk. The LLVM and Clang versions must match exactly. For most users, we recommend using a binary release of LLVM rather than building it yourself.

However, to run all of the tests and apps, an extended set is needed. This includes lld, Python 3, libpng, libjpeg, Doxygen, OpenBLAS, ATLAS, and Eigen3. While not required to build any part of Halide, we find that Ninja is the best backend build tool across all platforms.

Note that CMake has many special variables for overriding the locations of packages and executables. A partial list can be found in the "find module options" section below, and more can be found in the documentation for the CMake find_package command. Normally, you should prefer to make sure your environment is set up so that CMake can find dependencies automatically. For instance, if you want CMake to use a particular version of Python, create a virtual environment and activate it before configuring Halide.

Windows

We assume you have vcpkg installed at D:\vcpkg. Follow the instructions in the vcpkg README to install. Start by installing LLVM.

D:\vcpkg> .\vcpkg install llvm[target-all,enable-assertions,clang-tools-extra]:x64-windows
D:\vcpkg> .\vcpkg install llvm[target-all,enable-assertions,clang-tools-extra]:x86-windows

This will also install Clang and LLD. The enable-assertions option is not strictly necessary but will make debugging during development much smoother. These builds will take a long time and a lot of disk space. After they are built, it is safe to delete the intermediate build files and caches in D:\vcpkg\buildtrees and %APPDATA%\local\vcpkg.

Then install the other libraries:

D:\vcpkg> .\vcpkg install libpng:x64-windows libjpeg-turbo:x64-windows openblas:x64-windows eigen3:x64-windows
D:\vcpkg> .\vcpkg install libpng:x86-windows libjpeg-turbo:x86-windows openblas:x86-windows eigen3:x86-windows

To build the documentation, you will need to install Doxygen. This can be done either through Chocolatey or from the Doxygen website.

> choco install doxygen

To build the Python bindings, you will need to install Python 3. This should be done by running the official installer from the Python website. Be sure to download the debugging symbols through the installer. This will require using the "Advanced Installation" workflow. Although it is not strictly necessary, it is convenient to install Python system-wide on Windows (ie. C:\Program Files). This makes it easy for CMake to find without needing to manually set the PATH.

Once Python is installed, you can install the Python module dependencies either globally or in a virtual environment by running

> pip3 install -r .\python_bindings\requirements.txt

from the root of the repository.

If you would like to use Ninja, note that it is installed alongside CMake when using the Visual Studio 2019 installer. Alternatively, you can install via Chocolatey or place the pre-built binary from their website in the PATH.

> choco install ninja

macOS

On macOS, it is possible to install all dependencies via Homebrew:

$ brew install llvm libpng libjpeg python@3.8 openblas doxygen ninja

The llvm package includes clang, clang-format, and lld, too. Don't forget to install the Python module dependencies:

$ pip3 install -r python_bindings/requirements.txt

Ubuntu

Finally, on Ubuntu 20.04 LTS, you should install the following packages (this includes the Python module dependencies):

dev@ubuntu:~$ sudo apt install \
                  clang-tools lld llvm-dev libclang-dev liblld-10-dev \
                  libpng-dev libjpeg-dev libgl-dev \
                  python3-dev python3-numpy python3-scipy python3-imageio python3-pybind11 \
                  libopenblas-dev libeigen3-dev libatlas-base-dev \
                  doxygen ninja-build

Building Halide with CMake

Basic build

These instructions assume that your working directory is the Halide repo root.

Windows

If you plan to use the Ninja generator, be sure to be in the developer command prompt corresponding to your intended environment. Note that whatever your intended target system (x86, x64, or arm), you must use the 64-bit host tools because the 32-bit tools run out of memory during the linking step with LLVM. More information is available from Microsoft's documentation.

You should either open the correct Developer Command Prompt directly or run the vcvarsall.bat script with the correct argument, ie. one of the following:

D:\> "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvarsall.bat" x64
D:\> "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvarsall.bat" x64_x86
D:\> "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build\vcvarsall.bat" x64_arm

Then, assuming that vcpkg is installed to D:\vcpkg, simply run:

> cmake -G Ninja -DCMAKE_BUILD_TYPE=Release -DCMAKE_TOOLCHAIN_FILE=D:\vcpkg\scripts\buildsystems\vcpkg.cmake -S . -B build
> cmake --build .\build

Valid values of CMAKE_BUILD_TYPE are Debug, RelWithDebInfo, MinSizeRel, and Release. When using a single-configuration generator (like Ninja) you must specify a build type when configuring Halide (or any other CMake project).

Otherwise, if you wish to create a Visual Studio based build system, you can configure with:

> cmake -G "Visual Studio 16 2019" -Thost=x64 -A x64 ^
        -DCMAKE_TOOLCHAIN_FILE=D:\vcpkg\scripts\buildsystems\vcpkg.cmake ^
        -S . -B build
> cmake --build .\build --config Release -j %NUMBER_OF_PROCESSORS%

Because the Visual Studio generator is a multi-config generator, you don't set CMAKE_BUILD_TYPE at configure-time, but instead pass the configuration to the build (and test/install) commands with the --config flag. More documentation is available in the CMake User Interaction Guide.

The process is similar for 32-bit:

> cmake -G "Visual Studio 16 2019" -Thost=x64 -A Win32 ^
        -DCMAKE_TOOLCHAIN_FILE=D:\vcpkg\scripts\buildsystems\vcpkg.cmake ^
        -S . -B build
> cmake --build .\build --config Release -j %NUMBER_OF_PROCESSORS%

In both cases, the -Thost=x64 flag ensures that the correct host tools are used.

Note: due to limitations in MSBuild, incremental builds using the VS generators will not detect changes to headers in the src/runtime folder. We recommend using Ninja for day-to-day development and use Visual Studio only if you need it for packaging.

macOS and Linux

The instructions here are straightforward. Assuming your environment is set up correctly, just run:

dev@host:~/Halide$ cmake -G Ninja -DCMAKE_BUILD_TYPE=Release -S . -B build
dev@host:~/Halide$ cmake --build ./build

If you omit -G Ninja, a Makefile-based generator will likely be used instead. In either case, CMAKE_BUILD_TYPE must be set to one of the standard types: Debug, RelWithDebInfo, MinSizeRel, or Release.

CMake Presets

If you are using CMake 3.21+, we provide several presets to make the above commands more convenient. The following CMake preset commands correspond to the longer ones above.

> cmake --preset=win64    # VS 2019 generator, 64-bit build, vcpkg deps
> cmake --preset=win32    # VS 2019 generator, 32-bit build, vcpkg deps
> cmake --preset=release  # Release mode, any single-config generator / compiler

$ cmake --list-presets    # Get full list of presets.

The Windows presets assume that the environment variable VCPKG_ROOT is set and points to the root of the vcpkg installation.

Installing

Once built, Halide will need to be installed somewhere before using it in a separate project. On any platform, this means running the cmake --install command in one of two ways. For a single-configuration generator (like Ninja), run either:

dev@host:~/Halide$ cmake --install ./build --prefix /path/to/Halide-install
> cmake --install .\build --prefix X:\path\to\Halide-install

For a multi-configuration generator (like Visual Studio) run:

dev@host:~/Halide$ cmake --install ./build --prefix /path/to/Halide-install --config Release
> cmake --install .\build --prefix X:\path\to\Halide-install --config Release

Of course, make sure that you build the corresponding config before attempting to install it.

Build options

Halide reads and understands several options that can configure the build. The following are the most consequential and control how Halide is actually compiled.

Option	Default	Description
`BUILD_SHARED_LIBS`	`ON`	Standard CMake variable that chooses whether to build as a static or shared library.
`Halide_BUNDLE_LLVM`	`OFF`	When building Halide as a static library, unpack the LLVM static libraries and add those objects to libHalide.a.
`Halide_SHARED_LLVM`	`OFF`	Link to the shared version of LLVM. Not available on Windows.
`Halide_ENABLE_RTTI`	inherited from LLVM	Enable RTTI when building Halide. Recommended to be set to `ON`
`Halide_ENABLE_EXCEPTIONS`	`ON`	Enable exceptions when building Halide
`Halide_TARGET`	empty	The default target triple to use for `add_halide_library` (and the generator tests, by extension)

The following options are advanced and should not be required in typical workflows. Generally, these are used by Halide's own CI infrastructure, or as escape hatches for third-party packagers.

Option	Default	Description
`Halide_CLANG_TIDY_BUILD`	`OFF`	Used internally to generate fake compile jobs for runtime files when running clang-tidy.
`Halide_CCACHE_BUILD`	`OFF`	Use ccache with Halide-recommended settings to accelerate rebuilds.
`Halide_CCACHE_PARAMS`	`CCACHE_CPP2=yes CCACHE_HASHDIR=yes CCACHE_SLOPPINESS=pch_defines`	Options to pass to `ccache` when using `Halide_CCACHE_BUILD`.
`Halide_SOVERSION_OVERRIDE`	`${Halide_VERSION_MAJOR}`	Override the SOVERSION for libHalide. Expects a positive integer (i.e. not a version).

The following options are only available when building Halide directly, ie. not through the add_subdirectory or FetchContent mechanisms. They control whether non-essential targets (like tests and documentation) are built.

Option	Default	Description
`WITH_TESTS`	`ON`	Enable building unit and integration tests
`WITH_PYTHON_BINDINGS`	`ON` if Python found	Enable building Python 3.x bindings
`WITH_DOCS`	`OFF`	Enable building the documentation via Doxygen
`WITH_UTILS`	`ON`	Enable building various utilities including the trace visualizer
`WITH_TUTORIALS`	`ON`	Enable building the tutorials

The following options control whether to build certain test subsets. They only apply when WITH_TESTS=ON:

Option	Default	Description
`WITH_TEST_AUTO_SCHEDULE`	`ON`	enable the auto-scheduling tests
`WITH_TEST_CORRECTNESS`	`ON`	enable the correctness tests
`WITH_TEST_ERROR`	`ON`	enable the expected-error tests
`WITH_TEST_WARNING`	`ON`	enable the expected-warning tests
`WITH_TEST_PERFORMANCE`	`ON`	enable performance testing
`WITH_TEST_GENERATOR`	`ON`	enable the AOT generator tests

The following options enable/disable various LLVM backends (they correspond to LLVM component names):

Option	Default	Description
`TARGET_AARCH64`	`ON`, if available	Enable the AArch64 backend
`TARGET_AMDGPU`	`ON`, if available	Enable the AMD GPU backend
`TARGET_ARM`	`ON`, if available	Enable the ARM backend
`TARGET_HEXAGON`	`ON`, if available	Enable the Hexagon backend
`TARGET_MIPS`	`ON`, if available	Enable the MIPS backend
`TARGET_NVPTX`	`ON`, if available	Enable the NVidia PTX backend
`TARGET_POWERPC`	`ON`, if available	Enable the PowerPC backend
`TARGET_RISCV`	`ON`, if available	Enable the RISC V backend
`TARGET_WEBASSEMBLY`	`ON`, if available	Enable the WebAssembly backend.
`TARGET_X86`	`ON`, if available	Enable the x86 (and x86_64) backend

The following options enable/disable various Halide-specific backends:

Option	Default	Description
`TARGET_OPENCL`	`ON`	Enable the OpenCL-C backend
`TARGET_METAL`	`ON`	Enable the Metal backend
`TARGET_D3D12COMPUTE`	`ON`	Enable the Direct3D 12 Compute backend

The following options are WebAssembly-specific. They only apply when TARGET_WEBASSEMBLY=ON:

Option	Default	Description
`WITH_WABT`	`ON`	Include WABT Interpreter for WASM testing

Find module options

Halide uses the following find modules to search for certain dependencies. These modules accept certain variables containing hints for the search process. Before setting any of these variables, closely study the find_package documentation.

All of these variables should be set at the CMake command line via the -D flag.

First, Halide expects to find LLVM and Clang through the CONFIG mode of find_package. You can tell Halide where to find these dependencies by setting the corresponding _DIR variables:

Variable	Description
`LLVM_DIR`	`$LLVM_ROOT/lib/cmake/LLVM/LLVMConfig.cmake`
`Clang_DIR`	`$LLVM_ROOT/lib/cmake/Clang/ClangConfig.cmake`

Here, $LLVM_ROOT is assumed to point to the root of an LLVM installation tree. This is either a system path or one produced by running cmake --install (as detailed in the main README.md). When building LLVM (and any other CONFIG packages) manually, it is a common mistake to point CMake to a build tree rather than an install tree. Doing so often produces inscrutable errors.

When using CMake 3.18 or above, some of Halide's tests will search for CUDA using the FindCUDAToolkit module. If it doesn't find your CUDA installation automatically, you can point it to it by setting:

Variable	Description
`CUDAToolkit_ROOT`	Path to the directory containing `bin/nvcc[.exe]`
`CUDA_PATH`	Environment variable, same as above.

If the CMake version is lower than 3.18, the deprecated FindCUDA module will be used instead. It reads the variable CUDA_TOOLKIT_ROOT_DIR instead of CUDAToolkit_ROOT above.

TODO(#5633): update this section for OpenGLCompute, which needs some (but maybe not all) of this.

When targeting OpenGL, the FindOpenGL and FindX11 modules will be used to link AOT generated binaries. These modules can be overridden by setting the following variables:

Variable	Description
`OPENGL_egl_LIBRARY`	Path to the EGL library.
`OPENGL_glu_LIBRARY`	Path to the GLU library.
`OPENGL_glx_LIBRARY`	Path to the GLVND GLX library.
`OPENGL_opengl_LIBRARY`	Path to the GLVND OpenGL library
`OPENGL_gl_LIBRARY`	Path to the OpenGL library.

The OpenGL paths will need to be set if you intend to use OpenGL with X11 on macOS.

Halide also searches for libpng and libjpeg-turbo through the FindPNG and FindJPEG modules, respectively. They can be overridden by setting the following variables.

Variable	Description
`PNG_LIBRARIES`	Paths to the libraries to link against to use PNG.
`PNG_INCLUDE_DIRS`	Path to `png.h`, etc.
`JPEG_LIBRARIES`	Paths to the libraries needed to use JPEG.
`JPEG_INCLUDE_DIRS`	Paths to `jpeglib.h`, etc.

When WITH_DOCS is set to ON, Halide searches for Doxygen using the FindDoxygen module. It can be overridden by setting the following variable.

Variable	Description
`DOXYGEN_EXECUTABLE`	Path to the Doxygen executable.

When compiling for an OpenCL target, Halide uses the FindOpenCL target to locate the libraries and include paths. These can be overridden by setting the following variables:

Variable	Description
`OpenCL_LIBRARIES`	Paths to the libraries to link against to use OpenCL.
`OpenCL_INCLUDE_DIRS`	Include directories for OpenCL.

Lastly, Halide searches for Python 3 using the FindPython3 module, not the deprecated FindPythonInterp and FindPythonLibs modules, like other projects you might have encountered. You can select which Python installation to use by setting the following variable.

Variable	Description
`Python3_ROOT_DIR`	Define the root directory of a Python 3 installation.

Using Halide from your CMake build

This section assumes some basic familiarity with CMake but tries to be explicit in all its examples. To learn more about CMake, consult the documentation and engage with the community on the CMake Discourse.

Note: previous releases bundled a halide.cmake module that was meant to be include()-ed into your project. This has been removed. Please upgrade to the new package config module.

A basic CMake project

There are two main ways to use Halide in your application: as a JIT compiler for dynamic pipelines or an ahead-of-time (AOT) compiler for static pipelines. CMake provides robust support for both use cases.

No matter how you intend to use Halide, you will need some basic CMake boilerplate.

cmake_minimum_required(VERSION 3.22)
project(HalideExample)

set(CMAKE_CXX_STANDARD 17)  # or newer
set(CMAKE_CXX_STANDARD_REQUIRED YES)
set(CMAKE_CXX_EXTENSIONS NO)

find_package(Halide REQUIRED)

The cmake_minimum_required command is required to be the first command executed in a CMake program. It disables all of the deprecated behavior ("policies" in CMake lingo) from earlier versions. The project command sets the name of the project (and has arguments for versioning, language support, etc.) and is required by CMake to be called immediately after setting the minimum version.

The next three variables set the project-wide C++ standard. The first, CMAKE_CXX_STANDARD, simply sets the standard version. Halide requires at least C++17. The second, CMAKE_CXX_STANDARD_REQUIRED, tells CMake to fail if the compiler cannot provide the requested standard version. Lastly, CMAKE_CXX_EXTENSIONS tells CMake to disable vendor-specific extensions to C++. This is not necessary to simply use Halide, but we require it when authoring new code in the Halide repo.

Finally, we use find_package to locate Halide on your system. If Halide is not globally installed, you will need to add the root of the Halide installation directory to CMAKE_PREFIX_PATH at the CMake command line.

dev@ubuntu:~/myproj$ cmake -G Ninja -DCMAKE_BUILD_TYPE=Release -DCMAKE_PREFIX_PATH="/path/to/Halide-install" -S . -B build

JIT mode

To use Halide in JIT mode (like the tutorials do, for example), you can simply link to Halide::Halide.

# ... same project setup as before ...
add_executable(my_halide_app main.cpp)
target_link_libraries(my_halide_app PRIVATE Halide::Halide)

Then Halide.h will be available to your code and everything should just work. That's it!

AOT mode

Using Halide in AOT mode is more complicated so we'll walk through it step by step. Note that this only applies to Halide generators, so it might be useful to re-read the tutorial on generators. Assume (like in the tutorial) that you have a source file named my_generators.cpp and that in it you have generator classes MyFirstGenerator and MySecondGenerator with registered names my_first_generator and my_second_generator respectively.

Then the first step is to add a generator executable to your build:

# ... same project setup as before ...
add_executable(my_generators my_generators.cpp)
target_link_libraries(my_generators PRIVATE Halide::Generator)

Using the generator executable, we can add a Halide library corresponding to MyFirstGenerator.

# ... continuing from above
add_halide_library(my_first_generator FROM my_generators)

This will create a static library target in CMake that corresponds to the output of running your generator. The second generator in the file requires generator parameters to be passed to it. These are also easy to handle:

# ... continuing from above
add_halide_library(my_second_generator FROM my_generators
                   PARAMS parallel=false scale=3.0 rotation=ccw output.type=uint16)

Adding multiple configurations is easy, too:

# ... continuing from above
add_halide_library(my_second_generator_2 FROM my_generators
                   GENERATOR my_second_generator
                   PARAMS scale=9.0 rotation=ccw output.type=float32)

add_halide_library(my_second_generator_3 FROM my_generators
                   GENERATOR my_second_generator
                   PARAMS parallel=false output.type=float64)

Here, we had to specify which generator to use (my_second_generator) since it uses the target name by default. The functions in these libraries will be named after the target names, my_second_generator_2 and my_second_generator_3, by default, but it is possible to control this via the FUNCTION_NAME parameter.

Each one of these targets, <GEN>, carries an associated <GEN>.runtime target, which is also a static library containing the Halide runtime. It is transitively linked through <GEN> to targets that link to <GEN>. On an operating system like Linux, where weak linking is available, this is not an issue. However, on Windows, this can fail due to symbol redefinitions. In these cases, you must declare that two Halide libraries share a runtime, like so:

# ... updating above
add_halide_library(my_second_generator_2 FROM my_generators
                   GENERATOR my_second_generator
                   USE_RUNTIME my_first_generator.runtime
                   PARAMS scale=9.0 rotation=ccw output.type=float32)

add_halide_library(my_second_generator_3 FROM my_generators
                   GENERATOR my_second_generator
                   USE_RUNTIME my_first_generator.runtime
                   PARAMS parallel=false output.type=float64)

This will even work correctly when different combinations of targets are specified for each halide library. A "greatest common denominator" target will be chosen that is compatible with all of them (or the build will fail).

Autoschedulers

When the autoschedulers are included in the release package, they are very simple to apply to your own generators. For example, we could update the definition of the my_first_generator library above to use the Adams2019 autoscheduler:

add_halide_library(my_second_generator FROM my_generators
                   AUTOSCHEDULER Halide::Adams2019)

RunGenMain

Halide provides a generic driver for generators to be used during development for benchmarking and debugging. Suppose you have a generator executable called my_gen and a generator within called my_filter. Then you can pass a variable name to the REGISTRATION parameter of add_halide_library which will contain the name of a generated C++ source that should be linked to Halide::RunGenMain and my_filter.

For example:

add_halide_library(my_filter FROM my_gen
                   REGISTRATION filter_reg_cpp)
add_executable(runner ${filter_reg_cpp})
target_link_libraries(runner PRIVATE my_filter Halide::RunGenMain)

Then you can run, debug, and benchmark your generator through the runner executable.

Halide package documentation

Halide provides a CMake package configuration module. The intended way to use the CMake build is to run find_package(Halide ...) in your CMakeLists.txt file. Closely read the find_package documentation before proceeding.

Components

The Halide package script understands a handful of optional components when loading the package.

First, if you plan to use the Halide Image IO library, you will want to include the png and jpeg components when loading Halide.

Second, Halide releases can contain a variety of configurations: static, shared, debug, release, etc. CMake handles Debug/Release configurations automatically, but generally only allows one type of library to be loaded.

The package understands two components, static and shared, that specify which type of library you would like to load. For example, if you want to make sure that you link against shared Halide, you can write:

find_package(Halide REQUIRED COMPONENTS shared)

If the shared libraries are not available, this will result in a failure.

If no component is specified, then the Halide_SHARED_LIBS variable is checked. If it is defined and set to true, then the shared libraries will be loaded or the package loading will fail. Similarly, if it is defined and set to false, the static libraries will be loaded.

If no component is specified and Halide_SHARED_LIBS is not defined, then the BUILD_SHARED_LIBS variable will be inspected. If it is not defined or defined and set to true, then it will attempt to load the shared libs and fall back to the static libs if they are not available. Similarly, if BUILD_SHARED_LIBS is defined and set to false, then it will try the static libs first then fall back to the shared libs.

Variables

Variables that control package loading:

Variable	Description
`Halide_SHARED_LIBS`	override `BUILD_SHARED_LIBS` when loading the Halide package via `find_package`. Has no effect when using Halide via `add_subdirectory` as a Git or `FetchContent` submodule.

Variables set by the package:

Variable	Description
`Halide_VERSION`	The full version string of the loaded Halide package
`Halide_VERSION_MAJOR`	The major version of the loaded Halide package
`Halide_VERSION_MINOR`	The minor version of the loaded Halide package
`Halide_VERSION_PATCH`	The patch version of the loaded Halide package
`Halide_VERSION_TWEAK`	The tweak version of the loaded Halide package
`Halide_HOST_TARGET`	The Halide target triple corresponding to "host" for this build.
`Halide_CMAKE_TARGET`	The Halide target triple corresponding to the active CMake target.
`Halide_ENABLE_EXCEPTIONS`	Whether Halide was compiled with exception support
`Halide_ENABLE_RTTI`	Whether Halide was compiled with RTTI

Imported targets

Halide defines the following targets that are available to users:

Imported target	Description
`Halide::Halide`	this is the JIT-mode library to use when using Halide from C++.
`Halide::Generator`	this is the target to use when defining a generator executable. It supplies a `main()` function.
`Halide::Runtime`	adds include paths to the Halide runtime headers
`Halide::Tools`	adds include paths to the Halide tools, including the benchmarking utility.
`Halide::ImageIO`	adds include paths to the Halide image IO utility and sets up dependencies to PNG / JPEG if they are available.
`Halide::RunGenMain`	used with the `REGISTRATION` parameter of `add_halide_library` to create simple runners and benchmarking tools for Halide libraries.

The following targets are not guaranteed to be available:

Imported target	Description
`Halide::Python`	this is a Python 3 package that can be referenced as `$<TARGET_FILE_DIR:Halide::Python>/..` when setting up `PYTHONPATH` for Python tests or the like from CMake.
`Halide::Adams19`	the Adams et.al. 2019 autoscheduler (no GPU support)
`Halide::Li18`	the Li et.al. 2018 gradient autoscheduler (limited GPU support)
`Halide::Mullapudi2016`	the Mullapudi et.al. 2016 autoscheduler (no GPU support)

Functions

Currently, only two functions are defined:

`add_halide_library`

This is the main function for managing generators in AOT compilation. The full signature follows:

add_halide_library(<target> FROM <generator-target>
                   [GENERATOR generator-name]
                   [FUNCTION_NAME function-name]
                   [NAMESPACE cpp-namespace]
                   [USE_RUNTIME hl-target]
                   [PARAMS param1 [param2 ...]]
                   [TARGETS target1 [target2 ...]]
                   [FEATURES feature1 [feature2 ...]]
                   [PLUGINS plugin1 [plugin2 ...]]
                   [AUTOSCHEDULER scheduler-name]
                   [GRADIENT_DESCENT]
                   [C_BACKEND]
                   [REGISTRATION OUTVAR]
                   [HEADER OUTVAR]
                   [<extra-output> OUTVAR])

extra-output = ASSEMBLY | BITCODE | COMPILER_LOG | CPP_STUB
             | FEATURIZATION | LLVM_ASSEMBLY | PYTHON_EXTENSION
             | PYTORCH_WRAPPER | SCHEDULE | STMT | STMT_HTML

This function creates a called <target> corresponding to running the <generator-target> (an executable target which links to Halide::Generator) one time, using command line arguments derived from the other parameters.

The arguments GENERATOR and FUNCTION_NAME default to <target>. They correspond to the -g and -f command line flags, respectively.

NAMESPACE is syntactic sugar to specify the C++ namespace (if any) of the generated function; you can also specify the C++ namespace (if any) directly in the FUNCTION_NAME argument, but for repeated declarations or very long namespaces, specifying this separately can provide more readable build files.

If USE_RUNTIME is not specified, this function will create another target called <target>.runtime which corresponds to running the generator with -r and a compatible list of targets. This runtime target is an INTERFACE dependency of <target>. If multiple runtime targets need to be linked together, setting USE_RUNTIME to another Halide library, <target2> will prevent the generation of <target>.runtime and instead use <target2>.runtime. This argument is most commonly used in conjunction with add_halide_runtime.

Parameters can be passed to a generator via the PARAMS argument. Parameters should be space-separated. Similarly, TARGETS is a space-separated list of targets for which to generate code in a single function. They must all share the same platform/bits/os triple (eg. arm-32-linux). Features that are in common among all targets, including device libraries (like cuda) should go in FEATURES. If TARGETS is not specified, the value of Halide_TARGET specified at configure time will be used.

Every element of TARGETS must begin with the same arch-bits-os triple. This function understands two meta-triples, host and cmake. The meta-triple host is equal to the arch-bits-os triple used to compile Halide along with all of the supported instruction set extensions. On platforms that support running both 32 and 64-bit programs, this will not necessarily equal the platform the compiler is running on or that CMake is targeting.

The meta-triple cmake is equal to the arch-bits-os of the current CMake target. This is useful if you want to make sure you are not unintentionally cross-compiling, which would result in an IMPORTED target being created. When TARGETS is empty and the host target would not cross-compile, then host will be used. Otherwise, cmake will be used and an author warning will be issued.

To use an autoscheduler, set the AUTOSCHEDULER argument to a target named like Namespace::Scheduler, for example Halide::Adams19. This will set the autoscheduler GeneratorParam on the generator command line to Scheduler and add the target to the list of plugins. Additional plugins can be loaded by setting the PLUGINS argument. If the argument to AUTOSCHEDULER does not contain :: or it does not name a target, it will be passed to the -s flag verbatim.

If GRADIENT_DESCENT is set, then the module will be built suitably for gradient descent calculation in TensorFlow or PyTorch. See Generator::build_gradient_module() for more documentation. This corresponds to passing -d 1 at the generator command line.

If the C_BACKEND option is set, this command will invoke the configured C++ compiler on a generated source. Note that a <target>.runtime target is not created in this case, and the USE_RUNTIME option is ignored. Other options work as expected.

If REGISTRATION is set, the path (relative to CMAKE_CURRENT_BINARY_DIR) to the generated .registration.cpp file will be set in OUTVAR. This can be used to generate a runner for a Halide library that is useful for benchmarking and testing, as documented above. This is equivalent to setting -e registration at the generator command line.

If HEADER is set, the path (relative to CMAKE_CURRENT_BINARY_DIR) to the generated .h header file will be set in OUTVAR. This can be used with install(FILES) to conveniently deploy the generated header along with your library.

Lastly, each of the extra-output arguments directly correspond to an extra output (via -e) from the generator. The value OUTVAR names a variable into which a path (relative to CMAKE_CURRENT_BINARY_DIR) to the extra file will be written.

`add_halide_generator`

This function aids in creating cross-compilable builds that use Halide generators.

add_halide_generator(
    target
    [PACKAGE_NAME package-name]
    [PACKAGE_NAMESPACE namespace]
    [EXPORT_FILE export-file]
    [PYSTUB generator-name]
    [[SOURCES] source1 ...]
)

Every named argument is optional, and the function uses the following default arguments:

If PACKAGE_NAME is not provided, it defaults to ${PROJECT_NAME}-halide_generators.
If PACKAGE_NAMESPACE is not provided, it defaults to ${PROJECT_NAME}::halide_generators::.
If EXPORT_FILE is not provided, it defaults to ${PROJECT_BINARY_DIR}/cmake/${ARG_PACKAGE_NAME}-config.cmake

The SOURCES keyword marks the beginning of sources to be used to build <target>, if it is not loaded. All unparsed arguments will be interpreted as sources.

This function guarantees that a Halide generator target named <namespace><target> is available. It will first search for a package named <package-name> using find_package; if it is found, it is assumed that it provides the target. Otherwise, it will create an executable target named target and an ALIAS target <namespace><target>. This function also creates a custom target named <package-name> if it does not exist and <target> would exist. In this case, <package-name> will depend on <target>, this enables easy building of just the Halide generators managed by this function.

After the call, <PACKAGE_NAME>_FOUND will be set to true if the host generators were imported (and hence won't be built). Otherwise, it will be set to false. This variable may be used to conditionally set properties on <target>.

Please see test/integration/xc for a simple example and apps/hannk for a complete app that uses it extensively.

If PYSTUB is specified, then a Python Extension will be built that wraps the Generator with CPython glue to allow use of the Generator Python 3.x. The result will be a a shared library of the form <target>_pystub.<soabi>.so, where describes the specific Python version and platform (e.g., cpython-310-darwin for Python 3.10 on macOS.) See README_python.md for examples of use.

`add_halide_python_extension_library`

This function wraps the outputs of one or more add_halide_library targets with glue code to produce a Python Extension library.

add_halide_python_extension_library(
    target
    [MODULE_NAME module-name]
    HALIDE_LIBRARIES library1 ...
)

FROM specifies any valid Generator target. If omitted,

HALIDE_LIBRARIES is a list of one of more add_halide_library targets. Each will be added to the extension as a callable method of the module. Note that every library specified must be built with the PYTHON_EXTENSION keyword specified, and all libraries must use the same Halide runtime.

The result will be a a shared library of the form <target>.<soabi>.so, where describes the specific Python version and platform (e.g., cpython-310-darwin for Python 3.10 on macOS.)

`add_halide_runtime`

This function generates a library containing a Halide runtime. Most user code will never need to use this, as add_halide_library() will call it for you if necessary. The most common use case is usually in conjunction with add_halide_python_extension_library(), as a way to ensure that all the halide libraries share an identical runtime.

add_halide_runtime(
    target
    [TARGETS target1 [target2 ...]]
)

The TARGETS argument has identical semantics to the argument of the same name for add_halide_library.

Cross compiling

Cross-compiling in CMake can be tricky, since CMake doesn't easily support compiling for both the host platform and the cross-platform within the same build. Unfortunately, Halide generator executables are just about always designed to run on the host platform. Each project will be set up differently and have different requirements, but here are some suggestions for effective use of CMake in these scenarios.

Use `add_halide_generator`

If you are writing new programs that use Halide, you might wish to use our helper, add_halide_generator. When using this helper, you are expected to build your project twice: once for your build host and again for your intended target.

When building the host build, you can use the <package-name> (see the documentation above) target to build just the generators. Then, in the target build, set <package-name>_ROOT to the host build directory.

For example:

$ cmake -G Ninja -S . -B build-host -DCMAKE_BUILD_TYPE=Release
$ cmake --build build-host --target <package-name>
$ cmake -G Ninja -S . -B build-target -DCMAKE_BUILD_TYPE=Release \
    -DCMAKE_TOOLCHAIN_FILE=/path/to/target-tc.cmake \
    -D<package-name>_ROOT:FILEPATH=$PWD/build-host
$ cmake --build build-target

Use a super-build

A CMake super-build consists of breaking down a project into sub-projects that are isolated by toolchain. The basic structure is to have an outermost project that only coordinates the sub-builds via the ExternalProject module.

One would then use Halide to build a generator executable in one self-contained project, then export that target to be used in a separate project. The second project would be configured with the target toolchain and would call add_halide_library with no TARGETS option and set FROM equal to the name of the imported generator executable. Obviously, this is a significant increase in complexity over a typical CMake project.

This is very compatible with the add_halide_generator strategy above.

Use `ExternalProject` directly

A lighter weight alternative to the above is to use ExternalProject directly in your parent build. Configure the parent build with the target toolchain, and configure the inner project to use the host toolchain. Then, manually create an IMPORTED target for your generator executable and call add_halide_library as described above.

The main drawback of this approach is that creating accurate IMPORTED targets is difficult since predicting the names and locations of your binaries across all possible platform and CMake project generators is difficult. In particular, it is hard to predict executable extensions in cross-OS builds.

Use an emulator or run on device

The CMAKE_CROSSCOMPILING_EMULATOR variable allows one to specify a command prefix to run a target-system binary on the host machine. One could set this to a custom shell script that uploads the generator executable, runs it on the device and copies back the results.

Bypass CMake

The previous two options ensure that the targets generated by add_halide_library will be normal static libraries. This approach does not use ExternalProject, but instead produces IMPORTED targets. The main drawback of IMPORTED targets is that they are considered second-class in CMake. In particular, they cannot be installed with the typical install(TARGETS) command. Instead, they must be installed using install(FILES) and the $<TARGET_FILE:tgt> generator expression.

Contributing CMake code to Halide

When contributing new CMake code to Halide, keep in mind that the minimum version is 3.22. Therefore, it is possible (and indeed required) to use modern CMake best practices.

Like any large and complex system with a dedication to preserving backwards compatibility, CMake is difficult to learn and full of traps. While not comprehensive, the following serves as a guide for writing quality CMake code and outlines the code quality expectations we have as they apply to CMake.

General guidelines and best practices

The following are some common mistakes that lead to subtly broken builds.

Reading the build directory. While setting up the build, the build directory should be considered write only. Using the build directory as a read/write temporary directory is acceptable as long as all temp files are cleaned up by the end of configuration.
Not using generator expressions. Declarative is better than imperative and this is no exception. Conditionally adding to a target property can leak unwanted details about the build environment into packages. Some information is not accurate or available except via generator expressions, eg. the build configuration.
Using the wrong variable. CMAKE_SOURCE_DIR doesn't always point to the Halide source root. When someone uses Halide via FetchContent, it will point to their source root instead. The correct variable is Halide_SOURCE_DIR. If you want to know if the compiler is MSVC, check it directly with the MSVC variable; don't use WIN32. That will be wrong when compiling with clang on Windows. In most cases, however, a generator expression will be more appropriate.
Using directory properties. Directory properties have vexing behavior and are essentially deprecated from CMake 3.0+. Propagating target properties is the way of the future.
Using the wrong visibility. Target properties can be PRIVATE, INTERFACE, or both (aka PUBLIC). Pick the most conservative one for each scenario. Refer to the transitive usage requirements docs for more information.
Needlessly expanding variables The if and foreach commands generally expand variables when provided by name. Expanding such variables manually can unintentionally change the behavior of the command. Use foreach (item IN LISTS list) instead of foreach (item ${list}). Similarly, use if (varA STREQUAL varB) instead of if ("${varA}" STREQUAL "${varB}") and definitely don't use if (${varA} STREQUAL ${varB}) since that will fail (in the best case) if either variable's value contains a semi-colon (due to argument expansion).

Prohibited commands list

As mentioned above, using directory properties is brittle and they are therefore not allowed. The following functions may not appear in any new CMake code.

Command	Alternative
`add_compile_definitions`	Use `target_compile_definitions`
`add_compile_options`	Use `target_compile_options`
`add_definitions`	Use `target_compile_definitions`
`add_link_options`	Use `target_link_options`, but prefer not to use either
`get_directory_property`	Use cache variables or target properties
`get_property(... DIRECTORY)`	Use cache variables or target properties
`include_directories`	Use `target_include_directories`
`link_directories`	Use `target_link_libraries`
`link_libraries`	Use `target_link_libraries`
`remove_definitions`	Generator expressions in `target_compile_definitions`
`set_directory_properties`	Use cache variables or target properties
`set_property(... DIRECTORY)`	Use cache variables or target properties
`target_link_libraries(target lib)`	Use `target_link_libraries` with a visibility specifier (eg. `PRIVATE`)

As an example, it was once common practice to write code similar to this:

# WRONG: do not do this
include_directories(include)
add_library(my_lib source1.cpp ..)

However, this has two major pitfalls. First, it applies to all targets created in that directory, even those before the call to include_directories and those created in include()-ed CMake files. As CMake files get larger and more complex, this behavior gets harder to pinpoint. This is particularly vexing when using the link_libraries or add_defintions commands. Second, this form does not provide a way to propagate the include directory to consumers of my_lib. The correct way to do this is:

# CORRECT
add_library(my_lib source1.cpp ...)
target_include_directories(my_lib PUBLIC $<BUILD_INTERFACE:include>)

This is better in many ways. It only affects the target in question. It propagates the include path to the targets linking to it (via PUBLIC). It also does not incorrectly export the host-filesystem-specific include path when installing or packaging the target (via $<BUILD_INTERFACE>).

If common properties need to be grouped together, use an INTERFACE target (better) or write a function (worse). There are also several functions that are disallowed for other reasons:

Command	Reason	Alternative
`aux_source_directory`	Interacts poorly with incremental builds and Git	List source files explicitly
`build_command`	CTest internal function	Use CTest build-and-test mode via `CMAKE_CTEST_COMMAND`
`cmake_host_system_information`	Usually misleading information.	Inspect toolchain variables and use generator expressions.
`cmake_policy(... OLD)`	OLD policies are deprecated by definition.	Instead, fix the code to work with the new policy.
`create_test_sourcelist`	We use our own unit testing solution	See the adding tests section.
`define_property`	Adds unnecessary complexity	Use a cache variable. Exceptions under special circumstances.
`enable_language`	Halide is C/C++ only	`FindCUDAToolkit` or `FindCUDA`, appropriately guarded.
`file(GLOB ...)`	Interacts poorly with incremental builds and Git	List source files explicitly. Allowed if not globbing for source files.
`fltk_wrap_ui`	Halide does not use FLTK	None
`include_external_msproject`	Halide must remain portable	Write a CMake package config file or find module.
`include_guard`	Use of recursive inclusion is not allowed	Write (recursive) functions.
`include_regular_expression`	Changes default dependency checking behavior	None
`load_cache`	Superseded by `FetchContent`/`ExternalProject`	Use aforementioned modules
`macro`	CMake macros are not hygienic and are therefore error-prone	Use functions instead.
`site_name`	Privacy: do not want leak host name information	Provide a cache variable, generate a unique name.
`variable_watch`	Debugging helper	None. Not needed in production.

Lastly, do not introduce any dependencies via find_package without broader approval. Confine dependencies to the dependencies/ subtree.

Prohibited variables list

Any variables that are specific to languages that are not enabled should, of course, be avoided. But of greater concern are variables that are easy to misuse or should not be overridden for our end-users. The following (non-exhaustive) list of variables shall not be used in code merged into master.

Variable	Reason	Alternative
`CMAKE_ROOT`	Code smell	Rely on `find_package` search options; include `HINTS` if necessary
`CMAKE_DEBUG_TARGET_PROPERTIES`	Debugging helper	None
`CMAKE_FIND_DEBUG_MODE`	Debugging helper	None
`CMAKE_RULE_MESSAGES`	Debugging helper	None
`CMAKE_VERBOSE_MAKEFILE`	Debugging helper	None
`CMAKE_BACKWARDS_COMPATIBILITY`	Deprecated	None
`CMAKE_BUILD_TOOL`	Deprecated	`${CMAKE_COMMAND} --build` or `CMAKE_MAKE_PROGRAM` (but see below)
`CMAKE_CACHEFILE_DIR`	Deprecated	`CMAKE_BINARY_DIR`, but see below
`CMAKE_CFG_INTDIR`	Deprecated	`$<CONFIG>`, `$<TARGET_FILE:..>`, target resolution of `add_custom_command`, etc.
`CMAKE_CL_64`	Deprecated	`CMAKE_SIZEOF_VOID_P`
`CMAKE_COMPILER_IS_*`	Deprecated	`CMAKE_<LANG>_COMPILER_ID`
`CMAKE_HOME_DIRECTORY`	Deprecated	`CMAKE_SOURCE_DIR`, but see below
`CMAKE_DIRECTORY_LABELS`	Directory property	None
`CMAKE_BUILD_TYPE`	Only applies to single-config generators.	`$<CONFIG>`
`CMAKE__FLAGS` (w/o `_INIT`)	User-only	Write a toolchain file with the corresponding `_INIT` variable
`CMAKE_COLOR_MAKEFILE`	User-only	None
`CMAKE_ERROR_DEPRECATED`	User-only	None
`CMAKE_CONFIGURATION_TYPES`	We only support the four standard build types	None

Of course feel free to insert debugging helpers while developing but please remove them before review. Finally, the following variables are allowed, but their use must be motivated:

Variable	Reason	Alternative
`CMAKE_SOURCE_DIR`	Points to global source root, not Halide's.	`Halide_SOURCE_DIR` or `PROJECT_SOURCE_DIR`
`CMAKE_BINARY_DIR`	Points to global build root, not Halide's	`Halide_BINARY_DIR` or `PROJECT_BINARY_DIR`
`CMAKE_MAKE_PROGRAM`	CMake abstracts over differences in the build tool.	Prefer CTest's build and test mode or CMake's `--build` mode
`CMAKE_CROSSCOMPILING`	Often misleading.	Inspect relevant variables directly, eg. `CMAKE_SYSTEM_NAME`
`BUILD_SHARED_LIBS`	Could override user setting	None, but be careful to restore value when overriding for a dependency

Any use of these functions and variables will block a PR.

Adding tests

When adding a file to any of the folders under test, be aware that CI expects that every .c and .cpp appears in the CMakeLists.txt file on its own line, possibly as a comment. This is to avoid globbing and also to ensure that added files are not missed.

For most test types, it should be as simple as adding to the existing lists, which must remain in alphabetical order. Generator tests are trickier, but following the existing examples is a safe way to go.

Adding apps

If you're contributing a new app to Halide: great! Thank you! There are a few guidelines you should follow when writing a new app.

Write the app as if it were a top-level project. You should call find_package(Halide) and set the C++ version to 11.
Call enable_testing() and add a small test that runs the app.
Don't assume your app will have access to a GPU. Write your schedules to be robust to varying buildbot hardware.
Don't assume your app will be run on a specific OS, architecture, or bitness. Write your apps to be robust (ideally efficient) on all supported platforms.
If you rely on any additional packages, don't include them as REQUIRED, instead test to see if their targets are available and, if not, call return() before creating any targets. In this case, print a message(STATUS "[SKIP] ..."), too.
Look at the existing apps for examples.
Test your app with ctest before opening a PR. Apps are built as part of the test, rather than the main build.

Files

README_cmake.md

Latest commit

History

README_cmake.md

File metadata and controls

Halide and CMake

Table of Contents

Getting started

Installing CMake

Cross-platform

Windows

macOS

Ubuntu Linux

Installing dependencies

Windows

macOS

Ubuntu

Building Halide with CMake

Basic build

Windows

macOS and Linux

CMake Presets

Installing

Build options

Find module options

Using Halide from your CMake build

A basic CMake project

JIT mode

AOT mode

Autoschedulers

RunGenMain

Halide package documentation

Components

Variables

Imported targets

Functions

add_halide_library

add_halide_generator

add_halide_python_extension_library

add_halide_runtime

Cross compiling

Use add_halide_generator

Use a super-build

Use ExternalProject directly

Use an emulator or run on device

Bypass CMake

Contributing CMake code to Halide

General guidelines and best practices

Prohibited commands list

Prohibited variables list

Adding tests

Adding apps

`add_halide_library`

`add_halide_generator`

`add_halide_python_extension_library`

`add_halide_runtime`

Use `add_halide_generator`

Use `ExternalProject` directly