Skip to content

Latest commit

 

History

History
186 lines (136 loc) · 4.11 KB

ESP32-Devices.md

File metadata and controls

186 lines (136 loc) · 4.11 KB

LilyGO TTGO T-Camera OV2640_V05

In platformio_override.ini uncomment the line with tasmota32 and set the correct COM port.

In user_config_override.h add:

#define USE_BMP
#define USE_I2C
#define USE_SPI
#define USE_DISPLAY
#define USE_DISPLAY_SSD1306
#define SHOW_SPLASH
#define USE_WEBCAM

Upload via USB, then apply the following Template:

{"NAME":"TTGO_V05","GPIO":[1,1,1,1,5090,5088,1,1,5056,5024,5089,5091,1,1,5092,5184,0,640,608,5093,0,5152,4928,5120,0,0,0,0,4992,160,32,1,5094,0,0,5095],"FLAG":0,"BASE":2}

The PIR will turn ON/OFF the display and send over MQTT the POWER status. The display shows the sensor data. To make the device work nicely, change the following settings in the Console:

Camera settings to correct orientation (USB on the bottom):

WCFlip ON
WCMirror ON
WCResolution 6
WCSaturation 0
WCBrightness -1
WCContrast 1

Display Settings (USB on the bottom):

DisplayRotate 2
DisplayCols 21
DisplayRows 7
DisplayMode 2

BME280 Settings (it is not very trustable):

HumOffset 10
TempOffset -15

PIR/Button Settings:

SwitchMode1 1
SetOption73 1

ODROID-GO

is supported via build Tasmota32-lvgl. Upload firmware and configure via Menu Auto-configuration

To make the device work nicely, change the following settings in the Console:

adcparam3 6,0,4095,0,6160

Rule for Joystick to dim the display:

on analog#joy2=1 do dimmer - endon on analog#joy2=2 do dimmer + endon

AITHINKER CAM

{"NAME":"AITHINKER CAM","GPIO":[4992,1,672,1,416,5088,1,1,1,6720,736,704,1,1,5089,5090,0,5091,5184,5152,0,5120,5024,5056,0,0,0,0,4928,576,5094,5095,5092,0,0,5093],"FLAG":0,"BASE":2}

wESP32

{"NAME":"wESP32","GPIO":[0,0,1,0,1,1,0,0,1,1,1,1,5568,5600,1,0,0,0,0,1,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}

WT32-ETH01

{"NAME":"WT32-ETH01","GPIO":[1,1,1,1,1,1,0,0,1,0,1,1,3840,576,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,0,1,1,0,0,1],"FLAG":0,"BASE":1}

Denky (Teleinfo)

{"NAME":"Denky (Teleinfo)","GPIO":[1,1,1,1,5664,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1376,1,1,0,0,0,0,1,5632,1,1,1,0,0,1],"FLAG":0,"BASE":1}

Olimex ESP32-PoE

{"NAME":"Olimex ESP32-PoE","GPIO":[1,1,1,1,1,1,0,0,5536,1,1,1,1,0,5600,0,0,0,0,5568,0,0,0,0,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}

M5Stack Atom

{"NAME":"M5Stack Atom","GPIO":[1,1,1,1,1,1,1,1,1056,1,1,1,1,1,1,1,0,609,1,1,0,641,640,1376,0,0,0,0,608,1,1,1,1,0,0,32],"FLAG":0,"BASE":1}

M5Stack Atom lite

{"NAME":"M5Stack Atom Lite","GPIO":[1,1,1,1,1,1,1,1,1056,1,1,1,1,1,1,1,0,1,1,1,0,1,640,1376,0,0,0,0,608,1,1,1,1,0,0,32],"FLAG":0,"BASE":1}

LilyGO ttgo-t-eth-poe

{"NAME":"LilyGO ttgo-t-eth-poe","GPIO":[0,1,1,1,1,1,1,1,1,1,1,1,1,1,5600,1,0,1,1,5568,0,1,1,1,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}

For working Ethernet, change the following setting in the Console:

EthClockMode 1

these 3 devices are also fully supported, more detailed info will be added later

TTGO ESP32 watch

fully supported with all sensors

TTGO T4

fully supported

m5stack CORE2

is fully supported with all sensors and SD card. Upload firmware Tasmota32-lvgl and configure via Menu Auto-configuration

Heltec WiFi Kit 32

OLED display needs the following template

{"NAME":"WiFi Kit 32","GPIO":[1,1,1,1,640,1,1,1,1,1,1,608,3840,1,1,1,0,1,1,1,0,224,1,1,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}

WEMOS / LOLIN D32

verified support for board plus I2C sensors

to use I2C, set IO21 to SDA and IO22 to SCL

Displays, sensors and other options

displays: (most probably all I2C displays will work)

USE_DISPLAY_SH1106  
USE_DISPLAY_EPAPER_29  
USE_DISPLAY_EPAPER_42  
USE_DISPLAY_ILI9341  
USE_DISPLAY_ILI9488  
USE_DISPLAY_SSD1351  
USE_DISPLAY_RA8876  
USE_DISPLAY_ST7789  
USE_DISPLAY_ILI9341_2  
USE_DISPLAY_ILI9342

sensors: (most probably all I2C sensors will work)

USE_SHT3X  
USE_BMP  
USE_VL53L0X  
USE_MLX90614  
USE_IBEACON  
USE_SML_M

misc:

USE_MP3_PLAYER  
USE_SCRIPT (scripting and all its options)  
USE_24C256  
USE_SENDMAIL
USE_ESP32MAIL