DEV-6183: pps_gpio add capture_clear property #20
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ Upstream commit a5cd1ab ] Remove inappropriate use of ntohs() and assign the port value directly. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6aca2f ] pdc_enable_intr() serves as a primitive to qcom_pdc_gic_{en,dis}able, and has a raw spinlock for mutual exclusion, which is uses with interruptible primitives. This means that this critical section can itself be interrupted. Should the interrupt also be a PDC interrupt, and the endpoint driver perform an irq_disable() on that interrupt, we end-up in a deadlock. Fix this by using the irqsave/irqrestore variants of the locking primitives. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com> Link: https://lore.kernel.org/r/20220224101226.88373-5-maz@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e414c25 ] smatch warning was reported as below -> smatch warnings: drivers/irqchip/irq-nvic.c:131 nvic_of_init() warn: 'nvic_base' not released on lines: 97. Release nvic_base upon failure. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Souptick Joarder (HPE) <jrdr.linux@gmail.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20220218163303.33344-1-jrdr.linux@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0da1d50 ] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197921 As pointed out in the discussion of buglink, we cannot calculate AT_PHDR as the sum of load_addr and exec->e_phoff. : The AT_PHDR of ELF auxiliary vectors should point to the memory address : of program header. But binfmt_elf.c calculates this address as follows: : : NEW_AUX_ENT(AT_PHDR, load_addr + exec->e_phoff); : : which is wrong since e_phoff is the file offset of program header and : load_addr is the memory base address from PT_LOAD entry. : : The ld.so uses AT_PHDR as the memory address of program header. In normal : case, since the e_phoff is usually 64 and in the first PT_LOAD region, it : is the correct program header address. : : But if the address of program header isn't equal to the first PT_LOAD : address + e_phoff (e.g. Put the program header in other non-consecutive : PT_LOAD region), ld.so will try to read program header from wrong address : then crash or use incorrect program header. This is because exec->e_phoff is the offset of PHDRs in the file and the address of PHDRs in the memory may differ from it. This patch fixes the bug by calculating the address of program headers from PT_LOADs directly. Signed-off-by: Akira Kawata <akirakawata1@gmail.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220127124014.338760-2-akirakawata1@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab552fc ] KASAN reports a use-after-free report when doing normal scsi-mq test [69832.239032] ================================================================== [69832.241810] BUG: KASAN: use-after-free in bfq_dispatch_request+0x1045/0x44b0 [69832.243267] Read of size 8 at addr ffff88802622ba88 by task kworker/3:1H/155 [69832.244656] [69832.245007] CPU: 3 PID: 155 Comm: kworker/3:1H Not tainted 5.10.0-10295-g576c6382529e #8 [69832.246626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [69832.249069] Workqueue: kblockd blk_mq_run_work_fn [69832.250022] Call Trace: [69832.250541] dump_stack+0x9b/0xce [69832.251232] ? bfq_dispatch_request+0x1045/0x44b0 [69832.252243] print_address_description.constprop.6+0x3e/0x60 [69832.253381] ? __cpuidle_text_end+0x5/0x5 [69832.254211] ? vprintk_func+0x6b/0x120 [69832.254994] ? bfq_dispatch_request+0x1045/0x44b0 [69832.255952] ? bfq_dispatch_request+0x1045/0x44b0 [69832.256914] kasan_report.cold.9+0x22/0x3a [69832.257753] ? bfq_dispatch_request+0x1045/0x44b0 [69832.258755] check_memory_region+0x1c1/0x1e0 [69832.260248] bfq_dispatch_request+0x1045/0x44b0 [69832.261181] ? bfq_bfqq_expire+0x2440/0x2440 [69832.262032] ? blk_mq_delay_run_hw_queues+0xf9/0x170 [69832.263022] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.264011] ? blk_mq_sched_request_inserted+0x100/0x100 [69832.265101] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.266206] ? blk_mq_do_dispatch_ctx+0x570/0x570 [69832.267147] ? __switch_to+0x5f4/0xee0 [69832.267898] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.268946] __blk_mq_run_hw_queue+0xc0/0x270 [69832.269840] blk_mq_run_work_fn+0x51/0x60 [69832.278170] process_one_work+0x6d4/0xfe0 [69832.278984] worker_thread+0x91/0xc80 [69832.279726] ? __kthread_parkme+0xb0/0x110 [69832.280554] ? process_one_work+0xfe0/0xfe0 [69832.281414] kthread+0x32d/0x3f0 [69832.282082] ? kthread_park+0x170/0x170 [69832.282849] ret_from_fork+0x1f/0x30 [69832.283573] [69832.283886] Allocated by task 7725: [69832.284599] kasan_save_stack+0x19/0x40 [69832.285385] __kasan_kmalloc.constprop.2+0xc1/0xd0 [69832.286350] kmem_cache_alloc_node+0x13f/0x460 [69832.287237] bfq_get_queue+0x3d4/0x1140 [69832.287993] bfq_get_bfqq_handle_split+0x103/0x510 [69832.289015] bfq_init_rq+0x337/0x2d50 [69832.289749] bfq_insert_requests+0x304/0x4e10 [69832.290634] blk_mq_sched_insert_requests+0x13e/0x390 [69832.291629] blk_mq_flush_plug_list+0x4b4/0x760 [69832.292538] blk_flush_plug_list+0x2c5/0x480 [69832.293392] io_schedule_prepare+0xb2/0xd0 [69832.294209] io_schedule_timeout+0x13/0x80 [69832.295014] wait_for_common_io.constprop.1+0x13c/0x270 [69832.296137] submit_bio_wait+0x103/0x1a0 [69832.296932] blkdev_issue_discard+0xe6/0x160 [69832.297794] blk_ioctl_discard+0x219/0x290 [69832.298614] blkdev_common_ioctl+0x50a/0x1750 [69832.304715] blkdev_ioctl+0x470/0x600 [69832.305474] block_ioctl+0xde/0x120 [69832.306232] vfs_ioctl+0x6c/0xc0 [69832.306877] __se_sys_ioctl+0x90/0xa0 [69832.307629] do_syscall_64+0x2d/0x40 [69832.308362] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [69832.309382] [69832.309701] Freed by task 155: [69832.310328] kasan_save_stack+0x19/0x40 [69832.311121] kasan_set_track+0x1c/0x30 [69832.311868] kasan_set_free_info+0x1b/0x30 [69832.312699] __kasan_slab_free+0x111/0x160 [69832.313524] kmem_cache_free+0x94/0x460 [69832.314367] bfq_put_queue+0x582/0x940 [69832.315112] __bfq_bfqd_reset_in_service+0x166/0x1d0 [69832.317275] bfq_bfqq_expire+0xb27/0x2440 [69832.318084] bfq_dispatch_request+0x697/0x44b0 [69832.318991] __blk_mq_do_dispatch_sched+0x52f/0x830 [69832.319984] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [69832.321087] blk_mq_sched_dispatch_requests+0xdf/0x140 [69832.322225] __blk_mq_run_hw_queue+0xc0/0x270 [69832.323114] blk_mq_run_work_fn+0x51/0x60 [69832.323942] process_one_work+0x6d4/0xfe0 [69832.324772] worker_thread+0x91/0xc80 [69832.325518] kthread+0x32d/0x3f0 [69832.326205] ret_from_fork+0x1f/0x30 [69832.326932] [69832.338297] The buggy address belongs to the object at ffff88802622b968 [69832.338297] which belongs to the cache bfq_queue of size 512 [69832.340766] The buggy address is located 288 bytes inside of [69832.340766] 512-byte region [ffff88802622b968, ffff88802622bb68) [69832.343091] The buggy address belongs to the page: [69832.344097] page:ffffea0000988a00 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88802622a528 pfn:0x26228 [69832.346214] head:ffffea0000988a00 order:2 compound_mapcount:0 compound_pincount:0 [69832.347719] flags: 0x1fffff80010200(slab|head) [69832.348625] raw: 001fffff80010200 ffffea0000dbac08 ffff888017a57650 ffff8880179fe840 [69832.354972] raw: ffff88802622a528 0000000000120008 00000001ffffffff 0000000000000000 [69832.356547] page dumped because: kasan: bad access detected [69832.357652] [69832.357970] Memory state around the buggy address: [69832.358926] ffff88802622b980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.360358] ffff88802622ba00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.361810] >ffff88802622ba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [69832.363273] ^ [69832.363975] ffff88802622bb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc [69832.375960] ffff88802622bb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [69832.377405] ================================================================== In bfq_dispatch_requestfunction, it may have function call: bfq_dispatch_request __bfq_dispatch_request bfq_select_queue bfq_bfqq_expire __bfq_bfqd_reset_in_service bfq_put_queue kmem_cache_free In this function call, in_serv_queue has beed expired and meet the conditions to free. In the function bfq_dispatch_request, the address of in_serv_queue pointing to has been released. For getting the value of idle_timer_disabled, it will get flags value from the address which in_serv_queue pointing to, then the problem of use-after-free happens; Fix the problem by check in_serv_queue == bfqd->in_service_queue, to get the value of idle_timer_disabled if in_serve_queue is equel to bfqd->in_service_queue. If the space of in_serv_queue pointing has been released, this judge will aviod use-after-free problem. And if in_serv_queue may be expired or finished, the idle_timer_disabled will be false which would not give effects to bfq_update_dispatch_stats. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Wensheng <zhangwensheng5@huawei.com> Link: https://lore.kernel.org/r/20220303070334.3020168-1-zhangwensheng5@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c99923 ] ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc Prevent acpi_ns_walk_namespace() from crashing when called with start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been instantiated yet and acpi_gbl_root_node is NULL. For instance, this can happen if the kernel is run with "acpi=off" in the command line. Link: acpica/acpica@b1c3656 Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/ Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 633174a ] Buidling raid6test on Ubuntu 21.10 (ppc64le) with GNU Make 4.3 shows the errors below: $ cd lib/raid6/test/ $ make <stdin>:1:1: error: stray ‘\’ in program <stdin>:1:2: error: stray ‘#’ in program <stdin>:1:11: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ \ before ‘<’ token [...] The errors come from the HAS_ALTIVEC test, which fails, and the POWER optimized versions are not built. That’s also reason nobody noticed on the other architectures. GNU Make 4.3 does not remove the backslash anymore. From the 4.3 release announcment: > * WARNING: Backward-incompatibility! > Number signs (#) appearing inside a macro reference or function invocation > no longer introduce comments and should not be escaped with backslashes: > thus a call such as: > foo := $(shell echo '#') > is legal. Previously the number sign needed to be escaped, for example: > foo := $(shell echo '\#') > Now this latter will resolve to "\#". If you want to write makefiles > portable to both versions, assign the number sign to a variable: > H := \# > foo := $(shell echo '$H') > This was claimed to be fixed in 3.81, but wasn't, for some reason. > To detect this change search for 'nocomment' in the .FEATURES variable. So, do the same as commit 9564a8c ("Kbuild: fix # escaping in .cmd files for future Make") and commit 929bef4 ("bpf: Use $(pound) instead of \# in Makefiles") and define and use a $(pound) variable. Reference for the change in make: https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57 Cc: Matt Brown <matthew.brown.dev@gmail.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15729ff ] A crash [1] happened to be triggered in conjunction with commit 2d52c58 ("block, bfq: honor already-setup queue merges"). The latter was then reverted by commit ebc69e8 ("Revert "block, bfq: honor already-setup queue merges""). Yet, the reverted commit was not the one introducing the bug. In fact, it actually triggered a UAF introduced by a different commit, and now fixed by commit d29bd41 ("block, bfq: reset last_bfqq_created on group change"). So, there is no point in keeping commit 2d52c58 ("block, bfq: honor already-setup queue merges") out. This commit restores it. [1] https://bugzilla.kernel.org/show_bug.cgi?id=214503 Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Link: https://lore.kernel.org/r/20211125181510.15004-1-paolo.valente@linaro.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f8dec1 ] Platforms with large BERT table data can trigger soft lockup errors while attempting to print the entire BERT table data to the console at boot: watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1] Observed on Ampere Altra systems with a single BERT record of ~250KB. The original bert driver appears to have assumed relatively small table data. Since it is impractical to reassemble large table data from interwoven console messages, and the table data is available in /sys/firmware/acpi/tables/data/BERT limit the size for tables printed to the console to 1024 (for no reason other than it seemed like a good place to kick off the discussion, would appreciate feedback from existing users in terms of what size would maintain their current usage model). Alternatively, we could make printing a CONFIG option, use the bert_disable boot arg (or something similar), or use a debug log level. However, all those solutions require extra steps or change the existing behavior for small table data. Limiting the size preserves existing behavior on existing platforms with small table data, and eliminates the soft lockups for platforms with large table data, while still making it available. Signed-off-by: Darren Hart <darren@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 524bb1d ] The function device_pm_check_callbacks() can be called under the spin lock (in the reported case it happens from genpd_add_device() -> dev_pm_domain_set(), when the genpd uses spinlocks rather than mutexes. However this function uncoditionally uses spin_lock_irq() / spin_unlock_irq(), thus not preserving the CPU flags. Use the irqsave/irqrestore instead. The backtrace for the reference: [ 2.752010] ------------[ cut here ]------------ [ 2.756769] raw_local_irq_restore() called with IRQs enabled [ 2.762596] WARNING: CPU: 4 PID: 1 at kernel/locking/irqflag-debug.c:10 warn_bogus_irq_restore+0x34/0x50 [ 2.772338] Modules linked in: [ 2.775487] CPU: 4 PID: 1 Comm: swapper/0 Tainted: G S 5.17.0-rc6-00384-ge330d0d82eff-dirty #684 [ 2.781384] Freeing initrd memory: 46024K [ 2.785839] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.785841] pc : warn_bogus_irq_restore+0x34/0x50 [ 2.785844] lr : warn_bogus_irq_restore+0x34/0x50 [ 2.785846] sp : ffff80000805b7d0 [ 2.785847] x29: ffff80000805b7d0 x28: 0000000000000000 x27: 0000000000000002 [ 2.785850] x26: ffffd40e80930b18 x25: ffff7ee2329192b8 x24: ffff7edfc9f60800 [ 2.785853] x23: ffffd40e80930b18 x22: ffffd40e80930d30 x21: ffff7edfc0dffa00 [ 2.785856] x20: ffff7edfc09e3768 x19: 0000000000000000 x18: ffffffffffffffff [ 2.845775] x17: 6572206f74206465 x16: 6c696166203a3030 x15: ffff80008805b4f7 [ 2.853108] x14: 0000000000000000 x13: ffffd40e809550b0 x12: 00000000000003d8 [ 2.860441] x11: 0000000000000148 x10: ffffd40e809550b0 x9 : ffffd40e809550b0 [ 2.867774] x8 : 00000000ffffefff x7 : ffffd40e809ad0b0 x6 : ffffd40e809ad0b0 [ 2.875107] x5 : 000000000000bff4 x4 : 0000000000000000 x3 : 0000000000000000 [ 2.882440] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff7edfc03a8000 [ 2.889774] Call trace: [ 2.892290] warn_bogus_irq_restore+0x34/0x50 [ 2.896770] _raw_spin_unlock_irqrestore+0x94/0xa0 [ 2.901690] genpd_unlock_spin+0x20/0x30 [ 2.905724] genpd_add_device+0x100/0x2d0 [ 2.909850] __genpd_dev_pm_attach+0xa8/0x23c [ 2.914329] genpd_dev_pm_attach_by_id+0xc4/0x190 [ 2.919167] genpd_dev_pm_attach_by_name+0x3c/0xd0 [ 2.924086] dev_pm_domain_attach_by_name+0x24/0x30 [ 2.929102] psci_dt_attach_cpu+0x24/0x90 [ 2.933230] psci_cpuidle_probe+0x2d4/0x46c [ 2.937534] platform_probe+0x68/0xe0 [ 2.941304] really_probe.part.0+0x9c/0x2fc [ 2.945605] __driver_probe_device+0x98/0x144 [ 2.950085] driver_probe_device+0x44/0x15c [ 2.954385] __device_attach_driver+0xb8/0x120 [ 2.958950] bus_for_each_drv+0x78/0xd0 [ 2.962896] __device_attach+0xd8/0x180 [ 2.966843] device_initial_probe+0x14/0x20 [ 2.971144] bus_probe_device+0x9c/0xa4 [ 2.975092] device_add+0x380/0x88c [ 2.978679] platform_device_add+0x114/0x234 [ 2.983067] platform_device_register_full+0x100/0x190 [ 2.988344] psci_idle_init+0x6c/0xb0 [ 2.992113] do_one_initcall+0x74/0x3a0 [ 2.996060] kernel_init_freeable+0x2fc/0x384 [ 3.000543] kernel_init+0x28/0x130 [ 3.004132] ret_from_fork+0x10/0x20 [ 3.007817] irq event stamp: 319826 [ 3.011404] hardirqs last enabled at (319825): [<ffffd40e7eda0268>] __up_console_sem+0x78/0x84 [ 3.020332] hardirqs last disabled at (319826): [<ffffd40e7fd6d9d8>] el1_dbg+0x24/0x8c [ 3.028458] softirqs last enabled at (318312): [<ffffd40e7ec90410>] _stext+0x410/0x588 [ 3.036678] softirqs last disabled at (318299): [<ffffd40e7ed1bf68>] __irq_exit_rcu+0x158/0x174 [ 3.045607] ---[ end trace 0000000000000000 ]--- Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00b0a2 ] Currently, the parisc kernel does not fully support non-access TLB fault handling for probe instructions. In the fast path, we set the target register to zero if it is not a shadowed register. The slow path is not implemented, so we call do_page_fault. The architecture indicates that non-access faults should not cause a page fault from disk. This change adds to code to provide non-access fault support for probe instructions. It also modifies the handling of faults on userspace so that if the address lies in a valid VMA and the access type matches that for the VMA, the probe target register is set to one. Otherwise, the target register is set to zero. This was done to make probe instructions more useful for userspace. Probe instructions are not very useful if they set the target register to zero whenever a page is not present in memory. Nominally, the purpose of the probe instruction is determine whether read or write access to a given address is allowed. This fixes a problem in function pointer comparison noticed in the glibc testsuite (stdio-common/tst-vfprintf-user-type). The same problem is likely in glibc (_dl_lookup_address). V2 adds flush and lpa instruction support to handle_nadtlb_fault. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 841aee4 ] Put NVMe/TCP sockets in their own class to avoid some lockdep warnings. Sockets created by nvme-tcp are not exposed to user-space, and will not trigger certain code paths that the general socket API exposes. Lockdep complains about a circular dependency between the socket and filesystem locks, because setsockopt can trigger a page fault with a socket lock held, but nvme-tcp sends requests on the socket while file system locks are held. ====================================================== WARNING: possible circular locking dependency detected 5.15.0-rc3 #1 Not tainted ------------------------------------------------------ fio/1496 is trying to acquire lock: (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendpage+0x23/0x80 but task is already holding lock: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs] which lock already depends on the new lock. other info that might help us debug this: chain exists of: sk_lock-AF_INET --> sb_internal --> &xfs_dir_ilock_class/5 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&xfs_dir_ilock_class/5); lock(sb_internal); lock(&xfs_dir_ilock_class/5); lock(sk_lock-AF_INET); *** DEADLOCK *** 6 locks held by fio/1496: #0: (sb_writers#13){.+.+}-{0:0}, at: path_openat+0x9fc/0xa20 #1: (&inode->i_sb->s_type->i_mutex_dir_key){++++}-{3:3}, at: path_openat+0x296/0xa20 #2: (sb_internal){.+.+}-{0:0}, at: xfs_trans_alloc_icreate+0x41/0xd0 [xfs] #3: (&xfs_dir_ilock_class/5){+.+.}-{3:3}, at: xfs_ilock+0xcf/0x290 [xfs] #4: (hctx->srcu){....}-{0:0}, at: hctx_lock+0x51/0xd0 #5: (&queue->send_mutex){+.+.}-{3:3}, at: nvme_tcp_queue_rq+0x33e/0x380 [nvme_tcp] This annotation lets lockdep analyze nvme-tcp controlled sockets independently of what the user-space sockets API does. Link: https://lore.kernel.org/linux-nvme/CAHj4cs9MDYLJ+q+2_GXUK9HxFizv2pxUryUR0toX974M040z7g@mail.gmail.com/ Signed-off-by: Chris Leech <cleech@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9839ac ] Use of_device_get_match_data() to simplify the code. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Link: https://lore.kernel.org/r/20220315023138.2118293-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…iles [ Upstream commit fb7275a ] When dumping lock_classes information via /proc/lockdep, we can't take the lockdep lock as the lock hold time is indeterminate. Iterating over all_lock_classes without holding lock can be dangerous as there is a slight chance that it may branch off to other lists leading to infinite loop or even access invalid memory if changes are made to all_lock_classes list in parallel. To avoid this problem, iteration of lock classes is now done directly on the lock_classes array itself. The lock_classes_in_use bitmap is checked to see if the lock class is being used. To avoid iterating the full array all the times, a new max_lock_class_idx value is added to track the maximum lock_class index that is currently being used. We can theoretically take the lockdep lock for iterating all_lock_classes when other lockdep files (lockdep_stats and lock_stat) are accessed as the lock hold time will be shorter for them. For consistency, they are also modified to iterate the lock_classes array directly. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20220211035526.1329503-2-longman@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
…mark_bb [ Upstream commit a5c0e2f ] ext4_mb_mark_bb() currently wrongly calculates cluster len (clen) and flex_group->free_clusters. This patch fixes that. Identified based on code review of ext4_mb_mark_bb() function. Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/a0b035d536bafa88110b74456853774b64c8ac40.1644992609.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfdc502 ] In case of flex_bg feature (which is by default enabled), extents for any given inode might span across blocks from two different block group. ext4_mb_mark_bb() only reads the buffer_head of block bitmap once for the starting block group, but it fails to read it again when the extent length boundary overflows to another block group. Then in this below loop it accesses memory beyond the block group bitmap buffer_head and results into a data abort. for (i = 0; i < clen; i++) if (!mb_test_bit(blkoff + i, bitmap_bh->b_data) == !state) already++; This patch adds this functionality for checking block group boundary in ext4_mb_mark_bb() and update the buffer_head(bitmap_bh) for every different block group. w/o this patch, I was easily able to hit a data access abort using Power platform. <...> [ 74.327662] EXT4-fs error (device loop3): ext4_mb_generate_buddy:1141: group 11, block bitmap and bg descriptor inconsistent: 21248 vs 23294 free clusters [ 74.533214] EXT4-fs (loop3): shut down requested (2) [ 74.536705] Aborting journal on device loop3-8. [ 74.702705] BUG: Unable to handle kernel data access on read at 0xc00000005e980000 [ 74.703727] Faulting instruction address: 0xc0000000007bffb8 cpu 0xd: Vector: 300 (Data Access) at [c000000015db7060] pc: c0000000007bffb8: ext4_mb_mark_bb+0x198/0x5a0 lr: c0000000007bfeec: ext4_mb_mark_bb+0xcc/0x5a0 sp: c000000015db7300 msr: 800000000280b033 dar: c00000005e980000 dsisr: 40000000 current = 0xc000000027af6880 paca = 0xc00000003ffd5200 irqmask: 0x03 irq_happened: 0x01 pid = 5167, comm = mount <...> enter ? for help [c000000015db7380] c000000000782708 ext4_ext_clear_bb+0x378/0x410 [c000000015db7400] c000000000813f14 ext4_fc_replay+0x1794/0x2000 [c000000015db7580] c000000000833f7c do_one_pass+0xe9c/0x12a0 [c000000015db7710] c000000000834504 jbd2_journal_recover+0x184/0x2d0 [c000000015db77c0] c000000000841398 jbd2_journal_load+0x188/0x4a0 [c000000015db7880] c000000000804de8 ext4_fill_super+0x2638/0x3e10 [c000000015db7a40] c0000000005f8404 get_tree_bdev+0x2b4/0x350 [c000000015db7ae0] c0000000007ef058 ext4_get_tree+0x28/0x40 [c000000015db7b00] c0000000005f6344 vfs_get_tree+0x44/0x100 [c000000015db7b70] c00000000063c408 path_mount+0xdd8/0xe70 [c000000015db7c40] c00000000063c8f0 sys_mount+0x450/0x550 [c000000015db7d50] c000000000035770 system_call_exception+0x4a0/0x4e0 [c000000015db7e10] c00000000000c74c system_call_common+0xec/0x250 Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/2609bc8f66fc15870616ee416a18a3d392a209c4.1644992609.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc50957 ] [un]pin_user_pages_remote is dirtying pages without properly warning the file system in advance. A related race was noted by Jan Kara in 2018[1]; however, more recently instead of it being a very hard-to-hit race, it could be reliably triggered by process_vm_writev(2) which was discovered by Syzbot[2]. This is technically a bug in mm/gup.c, but arguably ext4 is fragile in that if some other kernel subsystem dirty pages without properly notifying the file system using page_mkwrite(), ext4 will BUG, while other file systems will not BUG (although data will still be lost). So instead of crashing with a BUG, issue a warning (since there may be potential data loss) and just mark the page as clean to avoid unprivileged denial of service attacks until the problem can be properly fixed. More discussion and background can be found in the thread starting at [2]. [1] https://lore.kernel.org/linux-mm/20180103100430.GE4911@quack2.suse.cz [2] https://lore.kernel.org/r/Yg0m6IjcNmfaSokM@google.com Reported-by: syzbot+d59332e2db681cf18f0318a06e994ebbb529a8db@syzkaller.appspotmail.com Reported-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Link: https://lore.kernel.org/r/YiDS9wVfq4mM2jGK@mit.edu Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f41ee8b ] As Wenqing Liu reported in bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=215657 - Overview UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 when mount and operate a corrupted image - Reproduce tested on kernel 5.17-rc4, 5.17-rc6 1. mkdir test_crash 2. cd test_crash 3. unzip tmp2.zip 4. mkdir mnt 5. ./single_test.sh f2fs 2 - Kernel dump [ 46.434454] loop0: detected capacity change from 0 to 131072 [ 46.529839] F2FS-fs (loop0): Mounted with checkpoint version = 7548c2d9 [ 46.738319] ================================================================================ [ 46.738412] UBSAN: array-index-out-of-bounds in fs/f2fs/segment.c:3460:2 [ 46.738475] index 231 is out of range for type 'unsigned int [2]' [ 46.738539] CPU: 2 PID: 939 Comm: umount Not tainted 5.17.0-rc6 #1 [ 46.738547] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1.1 04/01/2014 [ 46.738551] Call Trace: [ 46.738556] <TASK> [ 46.738563] dump_stack_lvl+0x47/0x5c [ 46.738581] ubsan_epilogue+0x5/0x50 [ 46.738592] __ubsan_handle_out_of_bounds+0x68/0x80 [ 46.738604] f2fs_allocate_data_block+0xdff/0xe60 [f2fs] [ 46.738819] do_write_page+0xef/0x210 [f2fs] [ 46.738934] f2fs_do_write_node_page+0x3f/0x80 [f2fs] [ 46.739038] __write_node_page+0x2b7/0x920 [f2fs] [ 46.739162] f2fs_sync_node_pages+0x943/0xb00 [f2fs] [ 46.739293] f2fs_write_checkpoint+0x7bb/0x1030 [f2fs] [ 46.739405] kill_f2fs_super+0x125/0x150 [f2fs] [ 46.739507] deactivate_locked_super+0x60/0xc0 [ 46.739517] deactivate_super+0x70/0xb0 [ 46.739524] cleanup_mnt+0x11a/0x200 [ 46.739532] __cleanup_mnt+0x16/0x20 [ 46.739538] task_work_run+0x67/0xa0 [ 46.739547] exit_to_user_mode_prepare+0x18c/0x1a0 [ 46.739559] syscall_exit_to_user_mode+0x26/0x40 [ 46.739568] do_syscall_64+0x46/0xb0 [ 46.739584] entry_SYSCALL_64_after_hwframe+0x44/0xae The root cause is we missed to do sanity check on curseg->alloc_type, result in out-of-bound accessing on sbi->block_count[] array, fix it. Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50719bf ] These have been incorrect since the function was introduced. A proper kerneldoc comment is added since this function, though static, is part of an external interface. Reported-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
…pression [ Upstream commit d284af4 ] In lz4_decompress_pages(), if size of decompressed data is not equal to expected one, we should print the size rather than size of target buffer for decompressed data, fix it. Signed-off-by: Chao Yu <chao.yu@oppo.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 714fbf2 ] ntfs_read_inode_mount invokes ntfs_malloc_nofs with zero allocation size. It triggers one BUG in the __ntfs_malloc function. Fix this by adding sanity check on ni->attr_list_size. Link: https://lkml.kernel.org/r/20220120094914.47736-1-dzm91@hust.edu.cn Reported-by: syzbot+3c765c5248797356edaa@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Acked-by: Anton Altaparmakov <anton@tuxera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82e3a49 ] Move some code out of zr36057_init() and create new functions for handling zr->video_dev. This permit to ease code reading and fix a zr->video_dev memory leak. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
…oran_reap_stat_com [ Upstream commit e3b86f4 ] On the case tmp_dcim=1, the index of buffer is miscalculated. This generate a NULL pointer dereference later. So let's fix the calcul and add a check to prevent this to reappear. Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9149418 ] This fixes several issues found with 'v4l2-compliance -s': 1) read()/write() is supported, but not reported in the capabilities 2) S_STD(G_STD()) failed: setting the same standard should just return 0. 3) G_PARM failed to set readbuffers. 4) different field values in the format vs. what v4l2_buffer reported. 5) zero the sequence number when starting streaming. 6) drop VB_USERPTR: makes no sense with dma_contig streaming. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52cdb01 ] Fix leak in error path. Signed-off-by: Peiwei Hu <jlu.hpw@foxmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37a1a2e ] Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites. CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name); Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer. Cc: Antonino Daplas <adaplas@gmail.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8738ddc ] w100fb_probe() did not reset the global state to its initial state. This can result in invocation of iounmap() even when there was not the appropriate successful call of ioremap(). For instance, this may be the case if first probe fails after two successful ioremap() while second probe fails when first ioremap() fails. The similar issue is with w100fb_remove(). The patch fixes both bugs. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com> Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c6f402 ] Do a sanity check on pixclock value to avoid divide by zero. If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible. Syzkaller reported a divide error in cirrusfb_check_pixclock. divide error: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2 RIP: 0010:cirrusfb_check_var+0x6f1/0x1260 Call Trace: fb_set_var+0x398/0xf90 do_fb_ioctl+0x4b8/0x6f0 fb_ioctl+0xeb/0x130 __x64_sys_ioctl+0x19d/0x220 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24565bc ] coccinelle report: ./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c: 479:9-17: WARNING: use scnprintf or sprintf Use sysfs_emit instead of scnprintf or sprintf makes more sense. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Yang Guang <yang.guang5@zte.com.cn> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f7e221 ] IRQ types blindly copied from very similar APQ8064. Fixes warnings as: WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120 ... Tested-by: LogicalErzor <logicalerzor@gmail.com> # boot-tested on Samsung S3 Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220108174229.60384-1-david@ixit.cz Signed-off-by: Sasha Levin <sashal@kernel.org>
Use TOD_READ_SECONDARY for extts to keep TOD_READ_PRIMARY for gettime and settime exclusively. Before this change, TOD_READ_PRIMARY was used for both extts and gettime/settime, which would result in changing TOD read/write triggers between operations. Using TOD_READ_SECONDARY would make extts independent of gettime/settime operation Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1652712427-14703-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also removes PEROUT_ENABLE_OUTPUT_MASK Signed-off-by: Min Li <min.li.xe@renesas.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/1652712427-14703-2-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
is_single_shot should return false for the power_of_2 mask Fixes: bec6759 ("ptp: ptp_clockmatrix: Add PTP_CLK_REQ_EXTTS support") Signed-off-by: Min Li <min.li.xe@renesas.com> Link: https://lore.kernel.org/r/1653403501-12621-1-git-send-email-min.li.xe@renesas.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need symbols in order to allow overlays to reference existing nodes
DEV-5400: Backport clockmatrix-related patches
Don't overwrite pm_power_off if it is already has been set by another driver.
Due to the order of devicetree parsing, another driver might have already assigned pm_power_off; ignore its value as we always want to reboot the system on poweroff.
In some configurations, a single TAI can be responsible for multiple mvpp2 interfaces. However, the mvpp2 driver will call mvpp22_tai_stop and mvpp22_tai_start per interface RX timestamp disable/enable. As a result, disabling timestamping for one interface would stop the worker and corrupt the other interface's RX timestamps. This commit solves the issue by introducing a simpler ref count for each TAI instance. Due to the ref count, we need now to lock tai->refcount_lock before doing anything. As a result, we can't call mvpp22_tai_do_aux_work as it will cause a deadlock. Therefore, we will just schedule the worker to start immediately. Fixes: ce3497e ("net: mvpp2: ptp: add support for receive timestamping") Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
This commit add support for capturing a timestamp in which the PTP_PULSE pin, received a signal. This feature is needed in order to synchronize multiple clocks in the same board, using tools like ts2phc from the linuxptp project. On the Armada 8040, this is the only way to do so as a result of multiple erattas with the PTP_PULSE_IN interface that was designed to synchronize the TAI on an external PPS signal (the errattas are FE-6856276, FE-7382160 from document MV-S501388-00). This patch introduces a pinctrl configuration "extts" that will be selected once the user had enabled extts, and then will be returned back to the "default" pinctrl config once it has been disabled. Additionally these configurations will be also used in any case that the user asks us to perform any action that involves "triggerering" the TAI subsystem, in order to avoid a case where the external trigger would trigger with the wrong action. This pinctrl mess is needed due to the fact that there is no way for us to distinguish between an external trigger (e.g. from the PTP_PULSE_IN pin) or an internal one, triggered by the registers. The polling rate is once in 95ms, the value was borrowed from ptp_clockmatrix which performs a similar task. This feature has been tested on an Aramda 8040 based board, with linuxptp 3.1.1's ts2phc. Signed-off-by: Shmuel Hazan <shmuel.h@siklu.com>
net: mvpp2: tai: add extts support
Old compilers (pre C99) cannot parse declaration of variables inside the init statement of a `for` loop. This commit extracts the declaration to the start of the function to comply with old compilers.
Manual integration of [renesas linux ptp driver package](https://github.com/renesas/linux-ptp-driver-package) which includes support for the pcm4l software
The way to receive this order is to define the dpll as hw clock (in falcon.dts, and clock registration in ptp_clockmatrix.c dpll driver init function), and rely on the dts clock dependencies (declare both phy and pcie as depended on this clock). This works well for the phy but the pcies (modem) need to enable two clocks ( CP110_GATE_PCIE_X1_0 & CP110_GATE_PCIE_X4) that were formerly disabled by the kernel, and that causes kernel stuck. (in the former version, the pcie driver init was earlier and before the kernel disabled those clocks). Also reset pcie through gpio after the disable+enable didn't help. So "DEV-6467: Improve DEV-6442-Add initialization order to the falcon phy and modems" was opened to further investigate and handle this problem, and meanwhile a patch was entered in cp110-system-controller.c:cp110_gate_disable to never disable those two clocks.
…he DPLL (#29) The current implementation of the PTP clock phase correction (see ClockPhaseAdjuster component inside "devices") uses an "adjust time" API call which in turn uses frequency correction (via "do_phase_pull_in" API call) for phase offset less than 15us. This intrudes into the frequency correction loop and decreases the accuracy of the phase correction loop. We mustn't use any frequency correction during phase correction to avoid those problems.
Add CONFIG_MARVELL_10G_PHY_PTP configure option to enable PTP support for marvell10g. This support includes: - get/set/adj time - enable/do_aux_work for sending timestamping events Not implemented: - adjfine/adjphase (maybe they can be a replica of what is already in mvpp2_tai) The TOD is captured either on CPU or on PPS trigger. In both cases we read TOD_CAP0. On CPU trigger: - clear capture - trigger and read - clear capture On PPS trigger, read periodically from do_aux_work: - check if capture exists (cannot be CPU because that clears the captures) - if it does, read it and then clear capture - if not, return EAGAIN The existing marvell10g driver only powers up/down the M unit and registers the PTP clock. Tests `ts2phc -l7 -m -s /dev/ptp2 -c /dev/ptp3` and observe the offset (increasing 1ns/min) `phc_ctl /dev/ptp3` operations (get|set|adj|cmp)
…rrata) (#31) The host software must enable MACsec auto-negotiation after enabling the MACsec unit: - **towards system** autoneg is always enabled. - although counterintuitive, the MACsec **towards wire** autoneg is enabled regardless of the copper autoneg status. Tests revealed that if copper autoneg is disabled and MACsec autoneg is also disabled then there's no traffic. But if copper autoneg is disabled and MACsec autoneg is enabled traffic passes just fine. PHY errata section 4.4: _MACsec unit auto-negotiation (31.8000.23:22) is disabled by default. As a result, the MACsec/PTP unit will not automatically detect a speed change at the fiber or copper interface. After enabling the MACsec unit, the MACsec auto-negotiation should be enabled by the host software_
The N366 PCB is missing a pull up resistor for the TX_DISABLE pin. This causes the SFP module to something never detect that the host changed the TX_DISABLE pin state from high to low. Which means the SFP module will never enable TX. Reference: DEV-7307
This PR provides the most basic configuration needed for PTP operation: 1. Load parser/updater microcode as observed in the MTD API 2. Enable remove crc at rx and add back to tx as per _LinkCrypt Functional Description section 1.1.20_ 3. On request insert piggyback timestamp in PTP header's reserved field on ingress and update residence time in the correctionField on egress: 3.1 On ingress `hwstamp_ctl -i eth2 -r12` sets piggyback 3.2 On egress `hwstamp_ctl -i eth2 -t1` updates residence time 3.3 To do both just `hwstamp_ctl -i eth2 -t1 -r12`
Add support for some of the PTP statistics per LinkCrypt PTP Functional
Description section 1.3.2.23. Currently not presenting GRE, IP-in-IP,
NTP, I-tag, SNAP, MPLS, MACsec parser counters.
- PTPv2 over Ethernet packets are identified correctly with
`rx_ptp_v2+rx_ptp_ini_piggyback` incrementing on ingress and
`tx_ptp_v2+tx_ptp_update_res` on egress.
- PTPv2 over UDP packets are also identified correctly with
`rx_ptp_v2+rx_udp+rx_ipv4+rx_ptp_ini_piggyback` incrementing together
with their tx counterpart.
- Regular IPv4 (e.g. ICMP) and UDP (e.g. mDNS) packets are also counted,
but without incrementing `rx_ptp_v2|tx_ptp_v2` and action counters.
Additionally, this PR configures all the PAM registers according to the
default values from the functional description, in order to be able to
parse IPv4 packets and (not tested) MPLS, LLC/SNAP. All PAM registers
are 0 by default in HW.
This PR also fixes the LUT entry to ignore the TransportSpecific field
(because in 1588v2.1 it was replaced by majorSdoId field and we do not
care about it) and also match Pdelay_Req, Pdelay_Resp event messages,
which also require accurate timestamping.
These stats are clear-on-read (`CFG_GEN::STAT_CFG_CLR_RD` is 1 by
default in HW).
Example statistics under ingress PTPv2-over-UDP traffic.
```
root@terragraph:~# ethtool --phy-statistics eth2
PHY statistics:
tx_ptp_drop: 0
tx_ptp_update_res: 0
tx_ptp_v2: 0
tx_ptp_v1: 0
tx_ptp_parser_err: 0
tx_udp: 3
tx_ipv4: 3
tx_ipv6: 0
tx_dot1q: 0
tx_stag: 0
rx_ptp_drop: 0
rx_ptp_ini_piggyback: 39
rx_ptp_v2: 39
rx_ptp_v1: 0
rx_ptp_parser_err: 0
rx_udp: 39
rx_ipv4: 39
rx_ipv6: 0
rx_dot1q: 0
rx_stag: 0
```
…e PHY's egress drop FIFO (#35) Taking inspiration from MTD API, where both `mtd_msec_ae_init` and `mtd_init_macsec` disable egress drop FIFO, yet keep ingress drop FIFO active. This setting fixes 1588TC time error spikes observed with Calnex. The drop buffer supports two operation modes, store-and-forward and cut-through. Mode selection is accomplished by programming `egr_sf_enable`, `igr_sf_enable` field in `slc_cfg_gen` register. Each buffer (egress and ingress) can have a separate operation mode. In the store-and-forward mode, the error packets are completely dropped, while non-error packets passing through the drop buffer incur a propagation delay proportional to their size. In the cut-through mode, all packets immediately pass through the drop buffer. Error information is forwarded to the MAC, and the MAC will transmit error packets with a bad CRC to propagate the error.
…nabled on regular 88x3310 PHY (#36) This PR fixes two issues: 1. Fix kernel panic in `mv3310_ptp_power_down` as `priv` used to be NULL in case PTP was not supported. Changed all marvell10g_ptp public functions to check whether `priv` was created, instead of going again through `mv3310_is_ptp_supported`. 2. Probe PTP from .start instead of .probe/.config_init, as `mv3310_is_ptp_supported` must be called only upon completion of reset (otherwise `MV_PMA_XG_EXT_STATUS` returns zero).
…own (#37) This PR fixes two issues related to PTP register access: 1. Guard against PTP register access in case the M unit is powered down (e.g. when the interface is admin disabled) 2. On link down event (e.g. cable unplug) there were many `Indirect read address mismatch` errors, indicating some kind of stall in register access. Inspired by MTD API, clearing the link down reset bit in the **undocumented** register 0x80b0 is the workaround for this issue.
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Useful for observing the pulse width.