vhost/scsi: null-ptr-dereference in vhost_scsi_get_req()

commit 221af82 upstream.

Since commit 3f8ca2e ("vhost/scsi: Extract common handling code
from control queue handler") a null pointer dereference bug can be
triggered when guest sends an SCSI AN request.

In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with
`&v_req.tmf.lun[1]` within a switch-case block and is then passed to
vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for
a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is
set to NULL in this branch. Later, in vhost_scsi_get_req(),
`vc->target` is dereferenced without being checked, leading to a null
pointer dereference bug. This bug can be triggered from guest.

When this bug occurs, the vhost_worker process is killed while holding
`vq->mutex` and the corresponding tpg will remain occupied
indefinitely.

Below is the KASAN report:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS
1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:vhost_scsi_get_req+0x165/0x3a0
Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00
48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6
04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00
RSP: 0018:ffff888017affb50 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8
RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000
FS:  000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0
Call Trace:
 <TASK>
 ? show_regs+0x86/0xa0
 ? die_addr+0x4b/0xd0
 ? exc_general_protection+0x163/0x260
 ? asm_exc_general_protection+0x27/0x30
 ? vhost_scsi_get_req+0x165/0x3a0
 vhost_scsi_ctl_handle_vq+0x2a4/0xca0
 ? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10
 ? __switch_to+0x721/0xeb0
 ? __schedule+0xda5/0x5710
 ? __kasan_check_write+0x14/0x30
 ? _raw_spin_lock+0x82/0xf0
 vhost_scsi_ctl_handle_kick+0x52/0x90
 vhost_run_work_list+0x134/0x1b0
 vhost_task_fn+0x121/0x350
...
 </TASK>
---[ end trace 0000000000000000 ]---

Let's add a check in vhost_scsi_get_req.

Fixes: 3f8ca2e ("vhost/scsi: Extract common handling code from control queue handler")
Signed-off-by: Haoran Zhang <wh1sper@zju.edu.cn>
[whitespace fixes]
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <b26d7ddd-b098-4361-88f8-17ca7f90adf7@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: Wh1sper2020

drivers/vhost/scsi.c

@@ -1018,20 +1018,23 @@ vhost_scsi_get_req(struct vhost_virtqueue *vq, struct vhost_scsi_ctx *vc,
 		/* virtio-scsi spec requires byte 0 of the lun to be 1 */
 		vq_err(vq, "Illegal virtio-scsi lun: %u\n", *vc->lunp);
 	} else {
-		struct vhost_scsi_tpg **vs_tpg, *tpg;
-
-		vs_tpg = vhost_vq_get_backend(vq);	/* validated at handler entry */
-
-		tpg = READ_ONCE(vs_tpg[*vc->target]);
-		if (unlikely(!tpg)) {
-			vq_err(vq, "Target 0x%x does not exist\n", *vc->target);
-		} else {
-			if (tpgp)
-				*tpgp = tpg;
-			ret = 0;
+		struct vhost_scsi_tpg **vs_tpg, *tpg = NULL;
+
+		if (vc->target) {
+			/* validated at handler entry */
+			vs_tpg = vhost_vq_get_backend(vq);
+			tpg = READ_ONCE(vs_tpg[*vc->target]);
+			if (unlikely(!tpg)) {
+				vq_err(vq, "Target 0x%x does not exist\n", *vc->target);
+				goto out;
+			}
 		}
-	}
 
+		if (tpgp)
+			*tpgp = tpg;
+		ret = 0;
+	}
+out:
 	return ret;
 }