Importing a DCC Table

You can use the EasyTable module to import a table straight from a PDF. First click the Settings icon (3 gears) in the top right and click Configure Settings, then the Module Settings tab. Scroll down to EasyTable and make sure Paste from table mode is checked.

Next, go to the Rollable Tables tab in the upper right of the Foundry interface and click New EasyTable at the bottom of the sidebar.

Copy/paste your table from the PDF into Notepad or (Notes on the Mac). Make sure each line is a number, followed by an entry. If the entry is very long it can word wrap, but make sure it is all part of the same line. If it isn’t, the table won’t come out right. You may also want to do a find and replace on “- “ to remove the hyphenations. Make sure Enable Safemode? is checked.

Copy/Paste from Notepad/Notes into Table Data in Foundry and click Generate.

The table is generated and you can roll on it. You may need to correct the Roll Table Formula.