Skip to content

Commit

Permalink
Updated INSTALL file (now redirects to website).
Browse files Browse the repository at this point in the history
  • Loading branch information
@fgvanzee
fgvanzee committed Apr 13, 2013
1 parent 0020ef7 commit ec16c52
Showing 1 changed file with 10 additions and 344 deletions.
354 changes: 10 additions & 344 deletions INSTALL
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3,354 +3,20 @@ BLIS framework
INSTALL
---

INTRODUCTION
For a detailed description of how to configure, compile, install, and link
to a BLIS library on your local system, please read the build system wiki
located at the BLIS project's official website:

This file contains an abbreviated description of how to configure, compile,
and install a BLIS library on your local system.
http://code.google.com/p/blis/wiki/BuildSystem

NOTE: This file is mainly for those of us who are impatient! It is probably
out-of-date. If you have time, PLEASE check the BLIS homepage for a wiki
page that describes the build process. The BLIS homepage is located at:
This document will always contain the most up-to-date information related
to instantiating a BLIS library from the framework source code. If you
have any further questions or wish to provide feedback, please contact the
BLIS community by posting your message to the general user mailing list:

http://code.google.com/p/blis/
https://groups.google.com/d/forum/blis-discuss

The BLIS build system was designed for use with GNU/Linux (or some other
sane UNIX). Other requirements are:

- bash (2.0 or later)
- GNU make
- a working C compiler

We also require various other shell utilities that are so ubiquitous that
they are not worth mentioning (such as 'mv', 'mkdir', 'find', and so forth).
If you are missing these utilities, then you have much bigger problems than
not being able to build BLIS.


STEP 1: FRAMEWORK CONFIGURATION

The first step is to create a BLIS configuration. This will take the form of
a subdirectory of the 'config' directory. Be sure and give the configuration
some meaningful name, such as "x86-64opt" to indicate that it will be used for
an x86_64 architecture and employ optimizations.

When creating your configuration sub-directory, you can use the reference
configuration as a template:

> ls config/reference
bli_config.h bli_kernel.h make_defs.mk
> cp -r config/reference config/x86-64opt
> ls config/x86-64opt
bli_config.h bli_kernel.h make_defs.mk

Then you would edit each of these three files. Here are some special notes
about each file:

o bli_config.h
- This is where you specify most of the parameters of your BLIS
configuration, including (but not limited to) such things as register
and cache blocksizes used by the micro-kernel(s).

o bli_kernel.h
- This file defines C preprocessor macros associated with various kernels
and micro-kernels. The reference configuration defines all kernels to
use reference implementations (which are provided as part of the BLIS
framework). If you end up writing your own optimized kernel for some
operation, be sure and enable its use here. Notice that you only have to
set ONE definition for each operation, as BLIS prepends s,d,c,z (as well
as the BLIS function prefix, currently 'bli_') to the names to create
the actual datatype instances.
- IMPORTANT: If you add your own kernels, OR if you use kernels provided
with the BLIS framework distribution (i.e., in the 'kernels' directory),
you MUST add a symbolic link to those kernels to the configuration
sub-directory so that 'make' can find and compile the source code. For
example, if you were going to use kernels for the x86-64 architecture
that are included with BLIS, you would run:

> pwd
/home/field/google_code/blis/config/x86-64opt
> ls
bli_config.h bli_kernel.h make_defs.mk
> ls ../../kernels
x86 x86_64
> ln -s ../../kernels/x86_64 kernels
> ls
bli_config.h bli_kernel.h kernels make_defs.mk
> ls -l kernels
lrwxrwxrwx 1 field dept 20 Dec 1 18:13 kernels -> ../../kernels/x86_64

If you are building new/custom kernels, nothing stops you from storing
your source code in an actual directory inside your configuration sub-
directory (rather than somewhere else that is then symbolically linked
to). But if you do that, it might get a little confusing if you create
*new* configurations that use the *same* kernels. Wherever you choose
to store your kernels, make sure that it makes sense for your workflow!

o make_defs.mk
- This file contains general 'make' definitions. To specify things such
as your C compiler and which compiler options to use, edit this
file.
- If you use the standalone test drivers in the 'test' directory, some of
the definitions defined in make_defs.mk (i.e., those used for building
the BLIS library instantiation) will also be used when building the
test drivers. If you want to use different compilers and/or flags,
simply edit test/Makefile so that the correct definitions are used.

Once you have your configuration sub-directory in place, you are done
configuring the framework!


STEP 2: MAKE CONFIGURATION

This step should be somewhat familiar to many people in the open source
software community. Simply run:

> ./configure <configname>

where <configname> is the configuration sub-directory name you chose in
step 1. If <configname> is not given, it defaults to 'reference'.

Upon running configure, you will get output similar to the following.
The exact output will depend on whether you cloned BLIS from a 'git'
repository or whether you obtained BLIS via a downloadable release
from the BLIS website.

> ./configure
configure: checking whether we need to update the version file.
configure: checking version file './version'.
configure: found .git directory; assuming git clone.
configure: executing git describe --tags.
configure: got back 0.1.3-2-g26cb659.
configure: truncating to 0.1.3-2.
configure: updating version file './version'.
configure: starting configuration of BLIS 0.1.3-2.
configure: no configuration sub-directory given; defaulting to 'reference'.
configure: no install prefix given; defaulting to '/home/field/blis'.
configure: creating ./config.mk from build/config.mk.in
configure: creating ./obj/reference
configure: creating ./obj/reference/config
configure: creating ./obj/reference/frame
configure: creating ./lib/reference
configure: mirroring ./config/reference to ./obj/reference/config
configure: mirroring ./frame to ./obj/reference/frame
configure: creating makefile fragment in ./config/reference
configure: creating makefile fragment in ./frame
configure: creating makefile fragment in ./frame/1
configure: creating makefile fragment in ./frame/1/axpyv

By default, BLIS is configured so that later on, when you run 'make install',
the library and header files will be installed in $(HOME)/blis. If you want
them to be installed somewhere else, use the '-p <PREFIX>' option, where
<PREFIX> is the path to which you want to install:

> ./configure -p /some/other/path <configname>

Note that 'configure' will create a 'lib' and 'include-<versconf>' directory
inside <PREFIX> if they do not already exist, as well as some symbolic links
for convenient references in application makefiles. (Here, <versconf> is an
identifier consisting of the BLIS distribution's version number and the
configuration name you chose in step 1.)

On last note: for a complete list of supported 'configure' options and
arguments, run 'configure' with the '-h' option:

> ./configure -h

The output from this invocation of 'configure' should give you an
up-to-date list of options and their descriptions.


STEP 3: COMPILATION

Once 'configure' is finished, you are ready to instantiate (compile) BLIS into
a library by running 'make':

> make

Running 'make' will result in output similar to:

Compiling frame/1/axpyv/bli_axpyv.c
Compiling frame/1/axpyv/bli_axpyv_check.c
Compiling frame/1/axpyv/bli_axpyv_unb_var1.c
Compiling frame/1/copynzv/bli_copynzv.c
Compiling frame/1/copynzv/bli_copynzv_check.c
Compiling frame/1/copynzv/bli_copynzv_unb_var1.c
Compiling frame/1/copyv/bli_copyv.c
Compiling frame/1/copyv/bli_copyv_check.c

If you want to see the individual command line invocations of the compiler,
edit your configuration's make_defs.mk to contain:

BLIS_ENABLE_VERBOSE_MAKE_OUTPUT=yes

or, you can temporarily override that value from the command line:

> make BLIS_ENABLE_VERBOSE_MAKE_OUTPUT=yes

Also, if you are compiling on a multicore system, you can get parallelism
via:

> make -j<n>

where <n> is the number of jobs 'make' is allowed to run simultaneously.
Generally, you should typically limit <n> to p+1, where p is the number of
processor cores on your system.


STEP 4: INSTALLATION

Toward the end of compilation, you should get output similar to:

Compiling frame/util/randv/bli_randv.c
Compiling frame/util/randv/bli_randv_unb_var1.c
Compiling frame/util/sets/bli_sets.c
Compiling frame/base/noopt/bli_dlamch.c (NOTE: optimizations disabled)
Compiling frame/base/noopt/bli_lsame.c (NOTE: optimizations disabled)
Compiling frame/base/noopt/bli_slamch.c (NOTE: optimizations disabled)
Archiving lib/reference/libblis.a

Now you have a BLIS library sitting in the 'lib/<configname>/' directory. To
install the library and the header files associated with it, simply execute:

> make install

This not only installs copies of the library and header files, but also
creates convenient symbolic links:

Installing libblis-0.1.3-2-reference.a into /home/field/blis/lib/
Installing C header files into /home/field/blis/include-0.1.3-2-reference
Installing symlink libblis.a into /home/field/blis/lib/
Installing symlink include into /home/field/blis/

This results in your <PREFIX> directory looking like:

> ls -l /home/field/blis
lrwxrwxrwx 1 field dept 29 Dec 6 14:19 include -> include-0.1.3-2-reference
drwxr-xr-x 2 field dept 32768 Dec 6 14:19 include-0.1.3-2-reference
drwxr-xr-x 2 field dept 4096 Dec 6 14:19 lib
> ls -l /home/field/blis/lib
-rw-r--r-- 1 field dept 3919726 Dec 6 14:19 libblis-0.1.3-2-reference.a
lrwxrwxrwx 1 field dept 31 Dec 6 14:19 libblis.a -> libblis-0.1.3-2-reference.a

If you were to build a new configuration or version of BLIS and install that,
'make' would update your symbolic links automatically. This means that simply
you don't need to use unwieldy names such as 'libblis-0.1.3-2-reference.a'.
Linking to 'libblis.a' and including '<PREFIX>/include' in your application's
makefile will always pull in the BLIS library and headers that were most
recently installed.


FURTHER DEVELOPMENT TOPCIS

-- Cleaning out build products --

If you want to remove various build products, you can use one of the 'make'
targets already defined for you in the BLIS Makefile:

> make clean
Removing .o files from ./obj/reference.
Removing .a files from ./lib/reference.

Executing the 'clean' target will remove all binary object files and library
builds from the 'obj' and 'lib' directories, respectively. Notice, though,
that only object files for the current configuration are removed. Any other
configurations' build products are left untouched.

> make cleanmk
Removing makefile fragments from ./config/reference.
Removing makefile fragments from ./frame.

The 'cleanmk' target results in removal of all makefile fragments from the
framework source tree. Makefile fragments are also removed from the
configuration sub-directory, since the build system also compiles any source
code residing there.

> make distclean
Removing makefile fragments from ./config/reference.
Removing makefile fragments from ./frame.
Removing .o files from ./obj/reference.
Removing .a files from ./lib/reference.
Removing ./config.mk.
Removing ./obj.
Removing ./lib.

Running the 'distclean' target is like saying, "Remove anything ever created
by the build system." In addition to invoking 'clean' and 'cleanmk', the
'distclean' target removes the 'config.mk' file as well as the top-level 'obj'
and 'lib' directories.

-- Switching configurations --

The BLIS build system was designed to allow a developer to be working with
multiple framework configurations simultaneously. For example, the build
system allows you to create a configuration that is oriented towards
debugging and then another similar configuration that requests a full slate
of optimizations to be applied by the compiler. Or, you might have yet another
configuration to test out a new kernel that you just wrote. All of these
configurations can co-exist together in the 'config' directory. (The BLIS
build system will NEVER delete any of these directories, not even when
executing a full clean via 'make distclean'.) And switching between these
configurations is easy; simply run './configure <configname>', where
<configname> is the configuration you want to switch to. The script will
prepare the build system for compiling for that configuration. If you are
ever unsure which configuration is "active", simply run:

> make showconfig
Current configuration is 'reference', located in './config/reference'

This will tell you which configuration is specified by the config.mk file.

Another benefit to configuration switching is that a previous configuration's
object files are saved from the previous build. For example, suppose you
configure a configuration named 'debug'. You run 'make' followed by 'make
install'. You use that debug-enabled library for a while and then you create
a configuration named 'opt', which is the same configuration in optimized
form. You compile, install, and test that library. But then you want to return
to developing with the 'debug' configuration. Simply run './configure debug'
again to switch to the 'debug' configuration. If you haven't run any of the
'clean' targets in the interim, the previously created object files for the
'debug' configuration will still be there (inside './obj/debug'). If you
change a .c source file (not a header file; see "Caveats" section below), you
won't have to recompile the whole library. Rather, only the source files that
changed since the previous configuration and compilation will need to be
recompiled.

Now, while the object files are "remembered" from previous configurations,
the library archives (and headers) are not. So, 'make install' will always
re-install the build products after returning to a previous configuration,
even if no source files (or header files) changed. We must re-install the
libraries unconditionally after switching back to a previous configuration
because while the configuration name (e.g., 'debug' or 'opt') might be the
same, the installation prefix might have changed. Thus, we must install the
build products just in case. But the installation itself is a relatively
low overhead task, and so shouldn't be much of a burden to a developer who
switches his or her configurations frequently.

-- Caveats --

Due to the way the BLIS framework handles header files, *any* change to *any*
header file will result in the entire library being rebuilt. This policy is
in place mostly out of an abundance of caution. If two or more files use
definitions in a header that is modified, and one or more of those files
somehow does not get recompiled to reflect the updated definitions, you could
end up sinking hours of time trying to track down a bug that didn't ever need
to be an issue to begin with. Thus, to prevent developers (including the
framework developer(s)) from shooting themselves in the foot with this
problem, the BLIS build system recompiles *all* object files if a header
file--any header file--is touched.


CONCLUSION

That's it! While the BLIS framework's build system has some nice features, it
essentially adheres to the familiar "./configure; make ; make install" build
process that many of us are used to.

If you have feedback, please consider keeping in touch with the project
maintainers, contributors, and other users by joining and participating
in the BLIS mailing lists (see the README for details).

Thanks for using BLIS!
Thanks for your interest in the BLIS framework!

Field Van Zee

0 comments on commit ec16c52

Please sign in to comment.