Merge remote-tracking branches 'spi/topic/pl022', 'spi/topic/pxa2xx',…

… 'spi/topic/rspi', 'spi/topic/sh-msiof' and 'spi/topic/sirf' into spi-next

Documentation/devicetree/bindings/spi/sh-msiof.txt

@@ -6,8 +6,17 @@ Required properties:
 			 "renesas,sh-mobile-msiof" for SH Mobile series.
 			 Examples with soctypes are:
 			 "renesas,msiof-r8a7790" (R-Car H2)
-			 "renesas,msiof-r8a7791" (R-Car M2)
-- reg                  : Offset and length of the register set for the device
+			 "renesas,msiof-r8a7791" (R-Car M2-W)
+			 "renesas,msiof-r8a7792" (R-Car V2H)
+			 "renesas,msiof-r8a7793" (R-Car M2-N)
+			 "renesas,msiof-r8a7794" (R-Car E2)
+- reg                  : A list of offsets and lengths of the register sets for
+			 the device.
+			 If only one register set is present, it is to be used
+			 by both the CPU and the DMA engine.
+			 If two register sets are present, the first is to be
+			 used by the CPU, and the second is to be used by the
+			 DMA engine.
 - interrupt-parent     : The phandle for the interrupt controller that
 			 services interrupts for this device
 - interrupts           : Interrupt specifier
@@ -17,12 +26,16 @@ Required properties:
 Optional properties:
 - clocks               : Must contain a reference to the functional clock.
 - num-cs               : Total number of chip-selects (default is 1)
+- dmas                 : Must contain a list of two references to DMA
+			 specifiers, one for transmission, and one for
+			 reception.
+- dma-names            : Must contain a list of two DMA names, "tx" and "rx".
 
 Optional properties, deprecated for soctype-specific bindings:
 - renesas,tx-fifo-size : Overrides the default tx fifo size given in words
 			 (default is 64)
 - renesas,rx-fifo-size : Overrides the default rx fifo size given in words
-			 (default is 64, or 256 on R-Car H2 and M2)
+			 (default is 64, or 256 on R-Car Gen2)
 
 Pinctrl properties might be needed, too.  See
 Documentation/devicetree/bindings/pinctrl/renesas,*.
@@ -31,9 +44,11 @@ Example:
 
 	msiof0: spi@e6e20000 {
 		compatible = "renesas,msiof-r8a7791";
-		reg = <0 0xe6e20000 0 0x0064>;
+		reg = <0 0xe6e20000 0 0x0064>, <0 0xe7e20000 0 0x0064>;
 		interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp0_clks R8A7791_CLK_MSIOF0>;
+		dmas = <&dmac0 0x51>, <&dmac0 0x52>;
+		dma-names = "tx", "rx";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		status = "disabled";

Documentation/devicetree/bindings/spi/spi-rspi.txt

@@ -11,7 +11,10 @@ Required properties:
 		        - "renesas,rspi-sh7757" (SH)
 			- "renesas,rspi-r7s72100" (RZ/A1H)
 			- "renesas,qspi-r8a7790" (R-Car H2)
-			- "renesas,qspi-r8a7791" (R-Car M2)
+			- "renesas,qspi-r8a7791" (R-Car M2-W)
+			- "renesas,qspi-r8a7792" (R-Car V2H)
+			- "renesas,qspi-r8a7793" (R-Car M2-N)
+			- "renesas,qspi-r8a7794" (R-Car E2)
 - reg              : Address start and address range size of the device
 - interrupts       : A list of interrupt-specifiers, one for each entry in
 		     interrupt-names.
@@ -30,6 +33,9 @@ Required properties:
 
 Optional properties:
 - clocks           : Must contain a reference to the functional clock.
+- dmas             : Must contain a list of two references to DMA specifiers,
+		     one for transmission, and one for reception.
+- dma-names        : Must contain a list of two DMA names, "tx" and "rx".
 
 Pinctrl properties might be needed, too.  See
 Documentation/devicetree/bindings/pinctrl/renesas,*.
@@ -58,4 +64,6 @@ Examples:
 		num-cs = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
+		dmas = <&dmac0 0x17>, <&dmac0 0x18>;
+		dma-names = "tx", "rx";
 	};

drivers/spi/Kconfig

@@ -391,7 +391,7 @@ config SPI_PXA2XX
 	  additional documentation can be found a Documentation/spi/pxa2xx.
 
 config SPI_PXA2XX_PCI
-	def_tristate SPI_PXA2XX && PCI
+	def_tristate SPI_PXA2XX && PCI && COMMON_CLK
 
 config SPI_ROCKCHIP
 	tristate "Rockchip SPI controller driver"

drivers/spi/spi-pl022.c

@@ -82,6 +82,7 @@
 #define SSP_MIS(r)	(r + 0x01C)
 #define SSP_ICR(r)	(r + 0x020)
 #define SSP_DMACR(r)	(r + 0x024)
+#define SSP_CSR(r)	(r + 0x030) /* vendor extension */
 #define SSP_ITCR(r)	(r + 0x080)
 #define SSP_ITIP(r)	(r + 0x084)
 #define SSP_ITOP(r)	(r + 0x088)
@@ -197,6 +198,12 @@
 /* Transmit DMA Enable bit */
 #define SSP_DMACR_MASK_TXDMAE		(0x1UL << 1)
 
+/*
+ * SSP Chip Select Control Register - SSP_CSR
+ * (vendor extension)
+ */
+#define SSP_CSR_CSVALUE_MASK		(0x1FUL << 0)
+
 /*
  * SSP Integration Test control Register - SSP_ITCR
  */
@@ -313,6 +320,7 @@ enum ssp_writing {
  * @extended_cr: 32 bit wide control register 0 with extra
  * features and extra features in CR1 as found in the ST variants
  * @pl023: supports a subset of the ST extensions called "PL023"
+ * @internal_cs_ctrl: supports chip select control register
  */
 struct vendor_data {
 	int fifodepth;
@@ -321,6 +329,7 @@ struct vendor_data {
 	bool extended_cr;
 	bool pl023;
 	bool loopback;
+	bool internal_cs_ctrl;
 };
 
 /**
@@ -440,9 +449,32 @@ static void null_cs_control(u32 command)
 	pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
 }
 
+/**
+ * internal_cs_control - Control chip select signals via SSP_CSR.
+ * @pl022: SSP driver private data structure
+ * @command: select/delect the chip
+ *
+ * Used on controller with internal chip select control via SSP_CSR register
+ * (vendor extension). Each of the 5 LSB in the register controls one chip
+ * select signal.
+ */
+static void internal_cs_control(struct pl022 *pl022, u32 command)
+{
+	u32 tmp;
+
+	tmp = readw(SSP_CSR(pl022->virtbase));
+	if (command == SSP_CHIP_SELECT)
+		tmp &= ~BIT(pl022->cur_cs);
+	else
+		tmp |= BIT(pl022->cur_cs);
+	writew(tmp, SSP_CSR(pl022->virtbase));
+}
+
 static void pl022_cs_control(struct pl022 *pl022, u32 command)
 {
-	if (gpio_is_valid(pl022->cur_cs))
+	if (pl022->vendor->internal_cs_ctrl)
+		internal_cs_control(pl022, command);
+	else if (gpio_is_valid(pl022->cur_cs))
 		gpio_set_value(pl022->cur_cs, command);
 	else
 		pl022->cur_chip->cs_control(command);
@@ -2100,6 +2132,10 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	pl022->vendor = id->data;
 	pl022->chipselects = devm_kzalloc(dev, num_cs * sizeof(int),
 					  GFP_KERNEL);
+	if (!pl022->chipselects) {
+		status = -ENOMEM;
+		goto err_no_mem;
+	}
 
 	/*
 	 * Bus Number Which has been Assigned to this SSP controller
@@ -2118,6 +2154,9 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	if (platform_info->num_chipselect && platform_info->chipselects) {
 		for (i = 0; i < num_cs; i++)
 			pl022->chipselects[i] = platform_info->chipselects[i];
+	} else if (pl022->vendor->internal_cs_ctrl) {
+		for (i = 0; i < num_cs; i++)
+			pl022->chipselects[i] = i;
 	} else if (IS_ENABLED(CONFIG_OF)) {
 		for (i = 0; i < num_cs; i++) {
 			int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
@@ -2241,6 +2280,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
 	amba_release_regions(adev);
  err_no_ioregion:
  err_no_gpio:
+ err_no_mem:
 	spi_master_put(master);
 	return status;
 }
@@ -2347,6 +2387,7 @@ static struct vendor_data vendor_arm = {
 	.extended_cr = false,
 	.pl023 = false,
 	.loopback = true,
+	.internal_cs_ctrl = false,
 };
 
 static struct vendor_data vendor_st = {
@@ -2356,6 +2397,7 @@ static struct vendor_data vendor_st = {
 	.extended_cr = true,
 	.pl023 = false,
 	.loopback = true,
+	.internal_cs_ctrl = false,
 };
 
 static struct vendor_data vendor_st_pl023 = {
@@ -2365,6 +2407,17 @@ static struct vendor_data vendor_st_pl023 = {
 	.extended_cr = true,
 	.pl023 = true,
 	.loopback = false,
+	.internal_cs_ctrl = false,
+};
+
+static struct vendor_data vendor_lsi = {
+	.fifodepth = 8,
+	.max_bpw = 16,
+	.unidir = false,
+	.extended_cr = false,
+	.pl023 = false,
+	.loopback = true,
+	.internal_cs_ctrl = true,
 };
 
 static struct amba_id pl022_ids[] = {
@@ -2398,6 +2451,15 @@ static struct amba_id pl022_ids[] = {
 		.mask	= 0xffffffff,
 		.data	= &vendor_st_pl023,
 	},
+	{
+		/*
+		 * PL022 variant that has a chip select control register whih
+		 * allows control of 5 output signals nCS[0:4].
+		 */
+		.id	= 0x000b6022,
+		.mask	= 0x000fffff,
+		.data	= &vendor_lsi,
+	},
 	{ 0, 0 },
 };
 

drivers/spi/spi-pxa2xx-pci.c

@@ -7,6 +7,8 @@
 #include <linux/of_device.h>
 #include <linux/module.h>
 #include <linux/spi/pxa2xx_spi.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
 
 enum {
 	PORT_CE4100,
@@ -21,6 +23,7 @@ struct pxa_spi_info {
 	int tx_chan_id;
 	int rx_slave_id;
 	int rx_chan_id;
+	unsigned long max_clk_rate;
 };
 
 static struct pxa_spi_info spi_info_configs[] = {
@@ -32,6 +35,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.tx_chan_id = -1,
 		.rx_slave_id = -1,
 		.rx_chan_id = -1,
+		.max_clk_rate = 3686400,
 	},
 	[PORT_BYT] = {
 		.type = LPSS_SSP,
@@ -41,6 +45,7 @@ static struct pxa_spi_info spi_info_configs[] = {
 		.tx_chan_id = 0,
 		.rx_slave_id = 1,
 		.rx_chan_id = 1,
+		.max_clk_rate = 50000000,
 	},
 };
 
@@ -53,6 +58,7 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	struct pxa2xx_spi_master spi_pdata;
 	struct ssp_device *ssp;
 	struct pxa_spi_info *c;
+	char buf[40];
 
 	ret = pcim_enable_device(dev);
 	if (ret)
@@ -84,6 +90,12 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	ssp->port_id = (c->port_id >= 0) ? c->port_id : dev->devfn;
 	ssp->type = c->type;
 
+	snprintf(buf, sizeof(buf), "pxa2xx-spi.%d", ssp->port_id);
+	ssp->clk = clk_register_fixed_rate(&dev->dev, buf , NULL,
+					CLK_IS_ROOT, c->max_clk_rate);
+	 if (IS_ERR(ssp->clk))
+		return PTR_ERR(ssp->clk);
+
 	memset(&pi, 0, sizeof(pi));
 	pi.parent = &dev->dev;
 	pi.name = "pxa2xx-spi";
@@ -92,8 +104,10 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 	pi.size_data = sizeof(spi_pdata);
 
 	pdev = platform_device_register_full(&pi);
-	if (IS_ERR(pdev))
+	if (IS_ERR(pdev)) {
+		clk_unregister(ssp->clk);
 		return PTR_ERR(pdev);
+	}
 
 	pci_set_drvdata(dev, pdev);
 
@@ -103,8 +117,12 @@ static int pxa2xx_spi_pci_probe(struct pci_dev *dev,
 static void pxa2xx_spi_pci_remove(struct pci_dev *dev)
 {
 	struct platform_device *pdev = pci_get_drvdata(dev);
+	struct pxa2xx_spi_master *spi_pdata;
+
+	spi_pdata = dev_get_platdata(&pdev->dev);
 
 	platform_device_unregister(pdev);
+	clk_unregister(spi_pdata->ssp.clk);
 }
 
 static const struct pci_device_id pxa2xx_spi_pci_devices[] = {