ℹ️ Info: This script can not be used on its own but requires the base installation. See main README for details.
This script downloads, imports and updates firewall address-lists. Its main purpose is to block attacking ip addresses, spam hosts, command-and-control servers and similar malicious entities. The default configuration contains lists from abuse.ch, dshield.org and blocklist.de, and lists from spamhaus.org are prepared.
The address-lists are updated in place, so after initial import you will not see situation when the lists are not populated.
To mitigate man-in-the-middle attacks with altered lists the server's certificate is checked.
⚠️ Warning: The script does not limit the size of a list, but keep in mind that huge lists can exhaust your device's resources (RAM and CPU), and may take a long time to process.
Just install the script:
$ScriptInstallUpdate fw-addr-lists;
And add two schedulers, first one for initial import after startup, second one for subsequent updates:
/system/scheduler/add name="fw-addr-lists@startup" start-time=startup on-event="/system/script/run fw-addr-lists;";
/system/scheduler/add name="fw-addr-lists" start-time=startup interval=2h on-event="/system/script/run fw-addr-lists;";
ℹ️ Info: Modify the interval to your needs, but it is recommended to use less than half of the configured timeout for expiration.
The configuration goes to global-config-overlay, these are the parameters:
FwAddrLists: a list of firewall address-lists to download and importFwAddrListTimeOut: the timeout for expiration without renew
ℹ️ Info: Copy relevant configuration from
global-config(the one without-overlay) to your localglobal-config-overlayand modify it to your specific needs.
Naming a certificate for a list makes the script verify the server certificate, so you should add that if possible. You may want to find the certificate name from browser.
Create firewall rules to process the packets that are related to addresses from address-lists.
This rejects the packets from and to IPv4 addresses listed in
address-list block.
/ip/firewall/filter/add chain=input src-address-list=block action=reject reject-with=icmp-admin-prohibited;
/ip/firewall/filter/add chain=forward src-address-list=block action=reject reject-with=icmp-admin-prohibited;
/ip/firewall/filter/add chain=forward dst-address-list=block action=reject reject-with=icmp-admin-prohibited;
/ip/firewall/filter/add chain=output dst-address-list=block action=reject reject-with=icmp-admin-prohibited;
You may want to have an address-list to allow specific addresses, as prepared
with a list allow. In fact you can use any list name, just change the
default ones or add your own - matching in configuration and firewall rules.
/ip/firewall/filter/add chain=input src-address-list=allow action=accept;
/ip/firewall/filter/add chain=forward src-address-list=allow action=accept;
/ip/firewall/filter/add chain=forward dst-address-list=allow action=accept;
/ip/firewall/filter/add chain=output dst-address-list=allow action=accept;
Modify these for your needs, but most important: Move the rules up in chains and make sure they actually take effect as expected!
Alternatively handle the packets in firewall's raw section if you prefer:
/ip/firewall/raw/add chain=prerouting src-address-list=block action=drop;
/ip/firewall/raw/add chain=prerouting dst-address-list=block action=drop;
/ip/firewall/raw/add chain=output dst-address-list=block action=drop;
⚠️ Warning: Just again... The order of firewall rules is important. Make sure they actually take effect as expected!
These are the same rules, but for IPv6.
Reject packets in address-list block:
/ipv6/firewall/filter/add chain=input src-address-list=block action=reject reject-with=icmp-admin-prohibited;
/ipv6/firewall/filter/add chain=forward src-address-list=block action=reject reject-with=icmp-admin-prohibited;
/ipv6/firewall/filter/add chain=forward dst-address-list=block action=reject reject-with=icmp-admin-prohibited;
/ipv6/firewall/filter/add chain=output dst-address-list=block action=reject reject-with=icmp-admin-prohibited;
Allow packets in address-list allow:
/ipv6/firewall/filter/add chain=input src-address-list=allow action=accept;
/ipv6/firewall/filter/add chain=forward src-address-list=allow action=accept;
/ipv6/firewall/filter/add chain=forward dst-address-list=allow action=accept;
/ipv6/firewall/filter/add chain=output dst-address-list=allow action=accept;
Drop packets in firewall's raw section:
/ipv6/firewall/raw/add chain=prerouting src-address-list=block action=drop;
/ipv6/firewall/raw/add chain=prerouting dst-address-list=block action=drop;
/ipv6/firewall/raw/add chain=output dst-address-list=block action=drop;
⚠️ Warning: Just again... The order of firewall rules is important. Make sure they actually take effect as expected!