feat(uart): add uart clock source selection method

cores/esp32/HardwareSerial.cpp

@@ -607,6 +607,20 @@ bool HardwareSerial::setMode(SerialMode mode) {
   return uartSetMode(_uart, mode);
 }
 
+// Sets the UART Clock Source based on the compatible SoC options
+// This method must be called before starting UART using begin(), otherwise it won't have any effect.
+// Clock Source Options are:
+// UART_CLK_SRC_APB          :: ESP32, ESP32-S2, ESP32-C3 and ESP32-S3
+// UART_CLK_SRC_PLL          :: ESP32-C2, ESP32-C5, ESP32-C6, ESP32-C61, ESP32-H2 and ESP32-P4
+// UART_CLK_SRC_XTAL         :: ESP32-C2, ESP32-C3, ESP32-C5, ESP32-C6, ESP32-C61, ESP32-H2, ESP32-S3 and ESP32-P4
+// UART_CLK_SRC_RTC_FAST     :: ESP32-C2, ESP32-C3, ESP32-C5, ESP32-C6, ESP32-C61, ESP32-H2, ESP32-S3 and ESP32-P4
+// UART_CLK_SRC_REF_TICK     :: ESP32 and ESP32-S2
+// Note: CLK_SRC_PLL Freq depends on the SoC - ESP32-C2 has 40MHz, ESP32-H2 has 48MHz and ESP32-C5, C6, C61 and P4 has 80MHz
+// Note: ESP32-C6, C61, ESP32-P4 and ESP32-C5 have LP UART that will use only RTC_FAST or XTAL/2 as Clock Source
+bool setClockSource(SerialClkSrc clkSrc) {
+  return uartSetClockSource(_uart, (uart_sclk_t) clkSrc);
+}
+
 // minimum total RX Buffer size is the UART FIFO space (128 bytes for most SoC) + 1. IDF imposition.
 // LP UART has FIFO of 16 bytes
 size_t HardwareSerial::setRxBufferSize(size_t new_size) {