WebServer.handleClient() longer time execution on ESP32-C3 compares to ESP8266 (930 us vs 10us)

[Owiec94]

Board

ESP32-C3

Device Description

ESP32-C3 DevKitM-1

Hardware Configuration

GPIO 19 as a test for Logic Analyzer software

Version

latest master (checkout manually)

IDE Name

PlatformIO

Operating System

Windows 10 x64

Flash frequency

mode:DOUT, clock div:1

PSRAM enabled

yes

Upload speed

ota

Description

Im using WebServer.handleClient() to manage GET commands with parameters in URL. This function on ESP32 takes 90 times longer compares to ESP8266.
My method of testing:

with Logic analyzer.

platform = espressif32
board = esp32-c3-devkitm-1

test with few handlers (webServer.on("/setParams"......):
933us

test without any handlers, just webServer.init():
933us

platform = espressif8266
board = esp07
test with few handlers:
11.88us

test without any handlers, just init:

11.88us

ESP32-C3 needs 933us compares to 11us on ESP8266 which is 90x timer slower than older chips. In my solution time is critical and I had to slow down other peripherals (to prevent overflow buffers), which affects essential on performance.

Sketch

void esp_get_hardware_info(void);
WebServer server(80);
void setup() 
{   
    Serial.begin(115200);
    WiFi.mode(WIFI_MODE_STA);
    IPAddress ip(192,168,1,116);
    IPAddress gw(192,168,1,1);
    IPAddress subnet(255,255,255,0);
    WiFi.config(ip, gw, subnet);
    WiFi.begin("ssid", "pw");

    while(WiFi.status() != WL_CONNECTED)
    {
        delay(500);
    }
    
    localIP = WiFi.localIP();
    WiFi.setAutoReconnect(true);
    WiFi.setTxPower(WIFI_POWER_19_5dBm);

    server.on(PSTR("/info"), esp_get_hardware_info);
    server.begin();
   
    
    

    pinMode(19, OUTPUT);
    digitalWrite(19,LOW);
}



void loop() 
{

    digitalWrite(19, HIGH);  
    server.handleClient();                               
    digitalWrite(19, LOW);                              

}

void esp_get_hardware_info(void)
{
    esp_chip_info_t chip_info;
    esp_chip_info(&chip_info);
    
    Serial.println("Hardware info");
    Serial.printf("%d cores Wifi %s%s\n", chip_info.cores, (chip_info.features & CHIP_FEATURE_BT) ? "/BT" : "",
    (chip_info.features & CHIP_FEATURE_BLE) ? "/BLE" : "");
    Serial.printf("Silicon revision: %d\n", chip_info.revision);
    Serial.printf("%dMB %s flash\n", spi_flash_get_chip_size()/(1024*1024), (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "embeded" : "external");
    
    //get chip id
    String chipId = String((uint32_t)ESP.getEfuseMac(), HEX);
    chipId.toUpperCase();
    
    Serial.printf("Chip id: %s\n", chipId.c_str());
}

platformio.ini
[env:esp32dev]
platform = espressif32
board = esp32-c3-devkitm-1
board_build.flash_mode = dout
board_build.f_cpu = 160000000L
board_build.filesystem = littlefs
board_build.mcu = esp32c3
board_build.variant = esp32c3
framework = arduino

Debug Message

-

Other Steps to Reproduce

This long time execution doesnt matter if WiFi is connected or not, also doesnt matter if we called before webServer.init() or not.

Both chips are clocked 160MHz.

I have checked existing issues, online documentation and the Troubleshooting Guide

• I confirm I have checked existing issues, online documentation and Troubleshooting guide.

[SuGlider]

@Owiec94 -
Would you mind posting an example Sketch that demonstrates this issue?
It would help us to analyse it.

[Owiec94]

@Owiec94 - Would you mind posting an example Sketch that demonstrates this issue? It would help us to analyse it.

Sure, I've pasted basic code in 1st post (without my stuff) which still generating long time execution - tested before paste here. If You need any additional info feel free to write, I'll do my best. Hope that helps quickly optimize that function. Thank You

[Owiec94]

@SuGlider any chances to fix it? Should I provide any info to help solve that problem?

[SuGlider]

Yes, I'll work on it soon, in a couple of weeks.

[scottchiefbaker]

I ran in to this same issue and posted an easily recreatable (is that a word) example on Reddit. This issue affects ALL ESP32 boards so the title may need to be updated.

With WebServer.h in it's current form it is impossible to get your main loop() to run more than 1000 times per second. This is extremely limiting for most applications.

Board	handleClient() on	handleClient() off
ESP8266	118156/s	142672/s
ESP32	1001/s	37409/s
ESP32-S2	994/s	289981/s

The issue only crops up when handleClient() is called. I believe the issue is the delay(1) that's inside of handleClient() here.

Whoever implemented this planned for this, because it can be disabled with server.enableDelay(false). This is an undocumented feature, and really hard to track down. Having delay inside of handleClient() should not be the default, because most people will not expect that adding a web server to their project will drop performance so much.

[scottchiefbaker]

Attached is the script I use to test this: blink-web.ino.gz.

FWIW while simply adding server.enableDelay(false) does improve performance significantly, the performance level is still significantly lower than ESP8266WebServer.h.

Board	Iterations	Percent of ESP8266
ESP8266	118156	100%
ESP32	32293	27.3%
ESP32-S2	57370	48.5%

Step 1 should be removing that arbitrary delay (or making enableDelay(true) the default).
Step 2 should be to dive deeper in to WebServer.h to figure out why it's so much slower than ESP8266WebServer.h even with more powerful ESP32 hardware.

[Owiec94]

Sorry for late response, temporary workaround is to call server.enableDelay(false); and call webserver.handle() every 1ms using timer. Now on ESP32-C3 we have 20us executing time - much much better but not perfect.