riscv: dts: add PWM pinctrl config of the StarFive Starlight board #38
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Owner
|
Thanks, I sorted the entries and pushed it. |
esmil
pushed a commit
that referenced
this pull request
May 5, 2022
This patch fixes a memory corruption that occurred in the nand_scan() path for Hynix nand device. On boot, for Hynix nand device will panic at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 00000070 | [00000070] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0 #38 | Hardware name: Generic DT based system | PC is at nandc_set_reg+0x8/0x1c | LR is at qcom_nandc_command+0x20c/0x5d0 | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113 | sp : c14adc50 ip : c14ee208 fp : c0cc970c | r10: 000000a3 r9 : 00000000 r8 : 00000040 | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040 | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040 | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset 64 size 2048 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0 | qcom_nandc_command from nand_readid_op+0x198/0x1e8 | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78 | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454 | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8 | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0 | qcom_nandc_probe from platform_probe+0x58/0xac The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_command() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page size in qcom_nand_attach_chip call back after freeing the previously allocated memory for bam txn as per nandc->max_cwperpage = 1 and then again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on page size in qcom_nand_attach_chip call back itself. Cc: stable@vger.kernel.org Fixes: 6a3cec6 ("mtd: rawnand: qcom: convert driver to nand_scan()") Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1650268107-5363-1-git-send-email-quic_mdalam@quicinc.com
esmil
pushed a commit
that referenced
this pull request
May 16, 2022
commit ba7542e upstream. This patch fixes a memory corruption that occurred in the nand_scan() path for Hynix nand device. On boot, for Hynix nand device will panic at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 00000070 | [00000070] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0 #38 | Hardware name: Generic DT based system | PC is at nandc_set_reg+0x8/0x1c | LR is at qcom_nandc_command+0x20c/0x5d0 | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113 | sp : c14adc50 ip : c14ee208 fp : c0cc970c | r10: 000000a3 r9 : 00000000 r8 : 00000040 | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040 | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040 | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset 64 size 2048 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0 | qcom_nandc_command from nand_readid_op+0x198/0x1e8 | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78 | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454 | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8 | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0 | qcom_nandc_probe from platform_probe+0x58/0xac The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_command() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page size in qcom_nand_attach_chip call back after freeing the previously allocated memory for bam txn as per nandc->max_cwperpage = 1 and then again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on page size in qcom_nand_attach_chip call back itself. Cc: stable@vger.kernel.org Fixes: 6a3cec6 ("mtd: rawnand: qcom: convert driver to nand_scan()") Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1650268107-5363-1-git-send-email-quic_mdalam@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
esmil
pushed a commit
that referenced
this pull request
Feb 20, 2023
If a non-root cgroup gets removed when there is a thread that registered
trigger and is polling on a pressure file within the cgroup, the polling
waitqueue gets freed in the following path:
do_rmdir
cgroup_rmdir
kernfs_drain_open_files
cgroup_file_release
cgroup_pressure_release
psi_trigger_destroy
However, the polling thread still has a reference to the pressure file and
will access the freed waitqueue when the file is closed or upon exit:
fput
ep_eventpoll_release
ep_free
ep_remove_wait_queue
remove_wait_queue
This results in use-after-free as pasted below.
The fundamental problem here is that cgroup_file_release() (and
consequently waitqueue's lifetime) is not tied to the file's real lifetime.
Using wake_up_pollfree() here might be less than ideal, but it is in line
with the comment at commit 42288cb ("wait: add wake_up_pollfree()")
since the waitqueue's lifetime is not tied to file's one and can be
considered as another special case. While this would be fixable by somehow
making cgroup_file_release() be tied to the fput(), it would require
sizable refactoring at cgroups or higher layer which might be more
justifiable if we identify more cases like this.
BUG: KASAN: use-after-free in _raw_spin_lock_irqsave+0x60/0xc0
Write of size 4 at addr ffff88810e625328 by task a.out/4404
CPU: 19 PID: 4404 Comm: a.out Not tainted 6.2.0-rc6 #38
Hardware name: Amazon EC2 c5a.8xlarge/, BIOS 1.0 10/16/2017
Call Trace:
<TASK>
dump_stack_lvl+0x73/0xa0
print_report+0x16c/0x4e0
kasan_report+0xc3/0xf0
kasan_check_range+0x2d2/0x310
_raw_spin_lock_irqsave+0x60/0xc0
remove_wait_queue+0x1a/0xa0
ep_free+0x12c/0x170
ep_eventpoll_release+0x26/0x30
__fput+0x202/0x400
task_work_run+0x11d/0x170
do_exit+0x495/0x1130
do_group_exit+0x100/0x100
get_signal+0xd67/0xde0
arch_do_signal_or_restart+0x2a/0x2b0
exit_to_user_mode_prepare+0x94/0x100
syscall_exit_to_user_mode+0x20/0x40
do_syscall_64+0x52/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Allocated by task 4404:
kasan_set_track+0x3d/0x60
__kasan_kmalloc+0x85/0x90
psi_trigger_create+0x113/0x3e0
pressure_write+0x146/0x2e0
cgroup_file_write+0x11c/0x250
kernfs_fop_write_iter+0x186/0x220
vfs_write+0x3d8/0x5c0
ksys_write+0x90/0x110
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 4407:
kasan_set_track+0x3d/0x60
kasan_save_free_info+0x27/0x40
____kasan_slab_free+0x11d/0x170
slab_free_freelist_hook+0x87/0x150
__kmem_cache_free+0xcb/0x180
psi_trigger_destroy+0x2e8/0x310
cgroup_file_release+0x4f/0xb0
kernfs_drain_open_files+0x165/0x1f0
kernfs_drain+0x162/0x1a0
__kernfs_remove+0x1fb/0x310
kernfs_remove_by_name_ns+0x95/0xe0
cgroup_addrm_files+0x67f/0x700
cgroup_destroy_locked+0x283/0x3c0
cgroup_rmdir+0x29/0x100
kernfs_iop_rmdir+0xd1/0x140
vfs_rmdir+0xfe/0x240
do_rmdir+0x13d/0x280
__x64_sys_rmdir+0x2c/0x30
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 0e94682 ("psi: introduce psi monitor")
Signed-off-by: Munehisa Kamata <kamatam@amazon.com>
Signed-off-by: Mengchi Cheng <mengcc@amazon.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/20230106224859.4123476-1-kamatam@amazon.com/
Link: https://lore.kernel.org/r/20230214212705.4058045-1-kamatam@amazon.com
esmil
pushed a commit
that referenced
this pull request
Oct 9, 2025
tee_shm_put have NULL pointer dereference:
__optee_disable_shm_cache -->
shm = reg_pair_to_ptr(...);//shm maybe return NULL
tee_shm_free(shm); -->
tee_shm_put(shm);//crash
Add check in tee_shm_put to fix it.
panic log:
Unable to handle kernel paging request at virtual address 0000000000100cca
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000002049d07000
[0000000000100cca] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
CPU: 2 PID: 14442 Comm: systemd-sleep Tainted: P OE ------- ----
6.6.0-39-generic #38
Source Version: 938b255f6cb8817c95b0dd5c8c2944acfce94b07
Hardware name: greatwall GW-001Y1A-FTH, BIOS Great Wall BIOS V3.0
10/26/2022
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tee_shm_put+0x24/0x188
lr : tee_shm_free+0x14/0x28
sp : ffff001f98f9faf0
x29: ffff001f98f9faf0 x28: ffff0020df543cc0 x27: 0000000000000000
x26: ffff001f811344a0 x25: ffff8000818dac00 x24: ffff800082d8d048
x23: ffff001f850fcd18 x22: 0000000000000001 x21: ffff001f98f9fb88
x20: ffff001f83e76218 x19: ffff001f83e761e0 x18: 000000000000ffff
x17: 303a30303a303030 x16: 0000000000000000 x15: 0000000000000003
x14: 0000000000000001 x13: 0000000000000000 x12: 0101010101010101
x11: 0000000000000001 x10: 0000000000000001 x9 : ffff800080e08d0c
x8 : ffff001f98f9fb88 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff001f83e761e0 x1 : 00000000ffff001f x0 : 0000000000100cca
Call trace:
tee_shm_put+0x24/0x188
tee_shm_free+0x14/0x28
__optee_disable_shm_cache+0xa8/0x108
optee_shutdown+0x28/0x38
platform_shutdown+0x28/0x40
device_shutdown+0x144/0x2b0
kernel_power_off+0x3c/0x80
hibernate+0x35c/0x388
state_store+0x64/0x80
kobj_attr_store+0x14/0x28
sysfs_kf_write+0x48/0x60
kernfs_fop_write_iter+0x128/0x1c0
vfs_write+0x270/0x370
ksys_write+0x6c/0x100
__arm64_sys_write+0x20/0x30
invoke_syscall+0x4c/0x120
el0_svc_common.constprop.0+0x44/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x24/0x88
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x14c/0x15
Fixes: dfd0743 ("tee: handle lookup of shm with reference count 0")
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
3 participants
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: Jianlong Huang jianlong.huang@starfivetech.com