Description
Good afternoon.
My heating system has the following equipment:
- 1 x Junkers CerapurMaxx ZBR 100-3
- 1 x Gateway MB LAN 2
- 1 x CW400 Thermostat
- 7 x MM100 Mixing modules
I use 5 MM100 modules for heating, 1 MM100 module for hot water and 1 MM100 module for heating the pool.
If I control the system via the Thermostat CW400, then everything works fine for me.
Now I decided to connect the heating system to the Home Assistant via MQTT and I bought BBQKees Gateway E32. I can see all my equipment perfectly in the EMS-ESP web interface, but there is one problem.
Mixer with 1-4 are shown as h1-h4, 5 becomes wwc1 Mixer, Mixer 6 becomes wwc2, but the mixer 7 (id8 for hot water) is wwc1!!!
Thus in EMS-ESP got two mixer wwc1, MQTT and considers them as one and constantly reads the information for sensors from one to the other mixer!!!
Is it possible to rename the mixer so that they are displayed correctly via MQTT?
Is it possible, if there are more than 4 mixers in the system, then, for example, mixers 1-8 should be assigned the values h1-h8, and mixers 9 - wwc1, 10 - wwc2 (for CW800 users, for example)?