libDaisy Changelog

v7.1.0

Features

Support for MIDI via USB Host has been added. (PR #611)
Four new OLED fonts were added: 4x6, 4x8, 5x8, and 6x7. (PR #619)

Bugfixes

Fixed issue with posting test results for contributor PRs form forks (PR #617)

v7.0.1

Features

Change AudioHandle::Config to an aggregate type, allows for aggregate init. Doesn't break existing code.
Add SerialRead example, shows how to read via Serial over USB
Add SH1106 OLED driver

Bugfixes

Fix float range for Random::GetFloat()
Move SAI initialized check so it isn't a no-op

v7.0.0

Features

Update internal CMSIS and HAL.
Adds new HAL module support via src/sys/stm32h7xx_hal_conf.h
- Digital Temperature Sensor
- Filter Math Accelerator (FMAC)
- Octo-SPI Controller (OSPI)
- Digital Filter for Delta-Sigma Modulation
- CORDIC co-processor block
Moves relevant HAL, CMSIS, Middleware code to submodules:

Bugfixes

Very minor bugfix in CpuLoadMeter_gtest.cpp so that a number would no longer overflow when bitshifting left

Migrating

Updating an existing libDaisy install via git pull will require you to run git restore . --recurse-submodules before it will compile.
- Note, this will also undo any local changes you may have to the library. Make sure to stash those!
If you clone a fresh copy of libDaisy with git clone https://www.github.com/electro-smith/libDaisy --recurse-submodules, this will not be necessary
Breaking changes:
- GPIO::Mode::OUTPUT_OD renamed to GPIO::Mode::OPEN_DRAIN due to a name conflict collision
- Compiled code size has increased by up to 7%

v6.0.0

Features

bootloader: Add local BootloaderBlink example for testing the bootloader and its various configs
bootloader: Add four bin variants: internal / external DFU, and 10ms / 2000ms timeouts
core: Add USE_DAISYSP_LGPL flag to core/Makefile for DaisySP_LGPL support.
bootloader: added System::BootloaderMode::DAISY, System::BootloaderMode::DAISY_SKIP_TIMEOUT, and System::BootloaderMode::DAISY_INFINITE_TIMEOUT options to System::ResetToBootloader method for better firmware updating flexibility.

Bug fixes

Fix link to electro-smith website in README
bootloader: pins D0, D29 and D30 are no longer stuck when using the Daisy bootloader
Color: Fixed bug with init not setting the green value correctly

Bootloader

This version of libDaisy and greater will be compatible with any version of the Daisy bootloader, meaning you won't have to update the bootloader on your product if you want the latest changes to libDaisy.
However, for newer versions of the bootloader, you must use a compatible version of libDaisy.
- Daisy bootloader v6.0 and up will only be compatible with libDaisy v5.3 and up.

v5.4.0

Features

adc: added ConversionSpeed configuration to the AdcChannelConfig (#579)
board: Updated Daisy board definitions to use new Pin system (#581)
board: added official support for new Daisy Seed2 DFM hardware (built in compatibility with DaisySeed class).
device: added driver for SK9822 (#574)
examples: added a number of minimal examples for the Seed/Seed2DFM
gatein: added new Init function that is compatible with newer C++ Pin type.

Bug Fixes

patchsm: Corrected gate out pin assignment confusion added by (#417) as noted by apbianco and tele_player
midi: improvements to UART transport stability, and fixes to parser (#566, #564, #583)
qspi: fixed memory cache invalidation for Persistent Storage (#572)
spi: fixed issue with unpredictable pin states at end of transmission (#553, #559)

Other

build: removed redundant compile-time def from CMake build (#565)
docs: use explicit grouping; omit comments from output (#563)
docs: fix typo in GPIO guide (#567)

v5.3.0

Features

driver: Software SPI transport SSD130x4WireSoftSpiTransport added for the OLED Display driver. (#551)

Bug Fixes

driver: Fixed a compiler error in Max11300Driver::WriteAnalogPinVolts()
driver: Fixed error reading multiple registers at once from the MPC23x17 GPIO expanders (#550)
seed: Fixed out of range pin definitions for extra GPIO on the Daisy Seed2 DFM (#544)
patchsm: Fixed issue where updating the audio callback params didn't update control samplerate (#543)

v5.2.0

Features

board: added board support for Noise Engineering legio platform
audio: added output_compensation value to config struct to allow for post-scaling of uneven audio passthru levels.
util: added a multiply operator to the Color class for scaling a color by a single factor.
device: Added ICM20948 sensor device driver
device: Added DPS310 device driver
device: Added MPR121 device driver
device: Added APDS9960 device driver
device: Added TLV493D device driver.
device: Added neotrellis driver
device: Added neopixel driver

Bug fixes

uart: fixed bug with fifo-dma-receive mode that would result in erratic reads over time. Fixes issues with UART (TRS/DIN) MIDI parsing

v5.1.0

Features

tim: TimerHandle now has callbacks each time the Period has elapsed. These can be enabled with TimerHandle::Config::enable_irq at Init time.
bootloader: Working with the bootloader has been simplified. See the new guide for updates on usage
usb: USBHost class has added support for user callbacks on device connection, disconnection, and when the MSC class becomes active.
uart: Adds DMA RX and TX modes, similar to how they work on the I2C and SPI.
uart: Update function names to be more in line with the new DMA / Blocking scheme.
- The old methods are wrappers for the new ones to preserve backwards compatibility, but will be removed in a future version.
- Affected functions: PollReceive, PollTx, StartRx, RxActive, FlushRx, PopRx, Readable

Bug Fixes

util: PersistentStorage class had a bug where calling the RestoreDefaults function would cause a crash
usb: LL HAL files for USB were updated to prevent timing issues when running with optimization
spi: Add IRQ handlers for SPI2-5. These should work with DMA now.
midi: bugs related to running status bytes for note off, and single data-byte messages have been resolved

Other

build: core/Makefile has had the -fnortti flag added to match libDaisy's Makefile
bootloader: local version of daisy bootloader has been updated to improve stability
spi: Added examples for blocking TX and DMA TX, added a writeup explaining how to use the SPI on the Daisy
uart: Adds examples for common modes of communication, both DMA, blocking, FIFO, and mixed.

v5.0.0

Breaking Changes

driver: MAX11300 driver interface changed considerably
spi: Order of arguments of the SpiHandle DMA functions changed
dma: SpiHandle previously used DMA1_Stream7, now uses DMA2_Stream2 and DMA2_Stream3

Features

spi: SpiHandle now has callbacks before and after a DMA transaction starts (can be used for software driven chip select)
spi: SpiHandle now supports simultaneous transmit and receive with DMA using SpiHandle::DmaTransmitAndReceive()
spi: added MultiSlaveSpiHandle that allows to connect to multiple SPI slave devices on a shared bus
driver: MAX11300 now supports multiple chips on a shared bus
driver: MAX11300 now uses DMA to handle updates without blocking
driver: MAX11300 now updates the chips continuously until manually stopped
driver: MAX11300 can now call a user-provided callback after an update is complete
debugging: added additional debugging aids to the HardFault handler
gatein: added invert init parameter for reading from different input circuits from the GateIn class.
ui: added OnUserInteraction virtual function to UI framework to allow for tracking user activity

Bug Fixes

logger: Added 10ms delay at the end of StartLog function. Without this, messages immediatly following the StartLog function were getting missed when wait_for_pc is set to true.
testing: debugging configuration now uses lldb debugging extension to support unit test debugging on macOS with Apple Silicon
driver: oled_ssd130x.h - Add the SpiHandle:Config struct to SSD130x4WireTransport:Config to allow full access to the SPI peripheral configuration.
hid: fixed issue in AnalogControl where computed coeff could be out of range with certain block sizes
driver: added missing alternate function pin mappings for SPI2, and UART for pins available on the patch_sm hardware
usb: fixed issue with MIDI output from USB
driver: fixed off-by-one error in qspi erase function.

Other

driver: improved debouncing for Switch, and Encoder classes (limiting debouncing to 1kHz max frequency internally).

Migrating

SPI

// Old
SpiHandle::Result DmaTransmit(uint8_t*            buff,
                              size_t              size,
                              SpiHandle::CallbackFunctionPtr callback,
                              void*               callback_context);
// New
SpiHandle::Result DmaTransmit(uint8_t*                            buff,
                              size_t                              size,
                              SpiHandle::StartCallbackFunctionPtr start_callback,
                              SpiHandle::EndCallbackFunctionPtr   end_callback,
                              void*                               callback_context);
// Same for DmaReceive and DmaTransmitAndReceive

MAX11300

// Old: MAX11300 takes no template arguments
MAX11300 max11300driver;
// New: MAX11300 takes number of chips as template argument
constexpr size_t num_devices = 4;
MAX11300<num_devices> max11300driver;

// Old: constructor only takes a config struct
max11300driver.Init(config);
// New: constructor takes a DMA buffer situated in non-cached and DMA-accessible memory
MAX11300Types::DmaBuffer DMA_BUFFER_MEM_SECTION max11300DmaBuffer;
max11300driver.Init(config, &max11300DmaBuffer);

// Old: most types are inside the MAX11300 classname scope
daisy::MAX11300::PIN_0
daisy::MAX11300::AdcVoltageRange
// New: types are in a separate namespace to keep them independent from the "num_devices" template argument
daisy::MAX11300Types::PIN_0
daisy::MAX11300Types::AdcVoltageRange

// Old: only a single chip was handled by the driver
max11300driver.ConfigurePinAsAnalogRead(daisy::MAX11300::PIN_0, daisy::MAX11300::AdcVoltageRange::NEGATIVE_5_TO_5);
max11300driver.ConfigurePinAsAnalogWrite(daisy::MAX11300::PIN_1, daisy::MAX11300::DacVoltageRange::NEGATIVE_5_TO_5);
// New: each function now takes an additional argument, the index of the chip
max11300driver.ConfigurePinAsAnalogRead(0, daisy::MAX11300Types::PIN_0, daisy::MAX11300Types::AdcVoltageRange::NEGATIVE_5_TO_5);
max11300driver.ConfigurePinAsAnalogWrite(1, daisy::MAX11300Types::PIN_1, daisy::MAX11300Types::DacVoltageRange::NEGATIVE_5_TO_5);

// Old: Update() synchronously updates the chip and blocks until the update is complete
max11300driver.Update(); // blocks
// New: - Start() works asynchronously in the background using DMA
//      - Start() will retrigger updates itself automatically, until stopped by calling Stop()
//      - A callback can be called after each update cycle that was completed successfully
void MyUpdateCompleteCallback(void* context) {
    // The context is the pointer you passed when calling `.Update()`
    // This callback comes from an interrupt, keep is fast.
}
max11300driver.Start(
    &MyUpdateCompleteCallback, // or nullptr if you don't need a callback. default: nullptr
    &someThingThatYouWantToGetPassedToYourCallback // callback context, or nullptr if not needed
);
// you don't have to specify the arguments, then the defaults will be used
max11300driver.Start();
// you can stop the auto update after you started it
max11300driver.Stop();

v4.0.0

Breaking Changes

driver: added support for the 0 .. 2.5V ADC range to MAX11300, splitting the enum VoltageRange into two enums for the ADC and DAC configurations.

Features

driver: added support for the MCP23x17 I/O Expander with I2C transport implementation

Bug Fixes

usb: fixed bug where using FatFS and a USB Device class simultaneously would result in a linker error.
- Shared IRQHandlers for the USB HS peripheral have been moved to sys/system.cpp
driver: made MAX11300 getter functions const
cmake: changed optimization to -O0 for Debug builds
qspi: fixed bug causing one sector erase beyond the given end address

Other

Migrating

MAX11300

// Old: Same enum used for DAC and ADC configurations
max11300driver.ConfigurePinAsAnalogRead(daisy::MAX11300::PIN_0, daisy::MAX11300::VoltageRange::NEGATIVE_5_TO_5);
max11300driver.ConfigurePinAsAnalogWrite(daisy::MAX11300::PIN_1, daisy::MAX11300::VoltageRange::NEGATIVE_5_TO_5);

// New: Different enum used for DAC and ADC configurations
max11300driver.ConfigurePinAsAnalogRead(daisy::MAX11300::PIN_0, daisy::MAX11300::AdcVoltageRange::NEGATIVE_5_TO_5);
max11300driver.ConfigurePinAsAnalogWrite(daisy::MAX11300::PIN_1, daisy::MAX11300::DacVoltageRange::NEGATIVE_5_TO_5);

v3.0.0

Breaking Changes

fatfs: the dsy_fatfs_init() function has been replaced with the FatFSInterface class that allows for multi-volume filesystem use with SDMMC and/or USB drives.
- The previous global variables SDPath, SDFatFS, SDFile, and retSD have been removed as they could not be used effectively with the addition of multi-volume support.
- The path, and FATFS objects can be acquired from the new FatFSInteface objects, and any FIL object(s) can be placed in AXI SRAM (or any other memory with USB).
namespace: new namespace "seed" was added for new pinout Daisy Seed pinout mappings.
- This isn't a breaking change on it's own, but when using namespace seed; a variable cannot be named, seed else it will throw ambiguity errors.

Features

bootloader: the bootloader can now be flashed directly from libDaisy using make program-boot
- apps can be built by overwriting LDSCRIPT with one of the new (_sram.lds, or _qspi.lds) linker scripts, and adding -DBOOT_APP to the C_DEFS within the user makefile.
- once the bootloader is on the device, apps compiled with the above changes can be flashed to the bootloader using make program-app
- this process is subject to change, and will be improved and documented in the coming weeks.
driver: added support for the MAX11300 ADC/DAC/GPI/GPO device
usb_midi: added MidiUsbTransport class for easy usb midi functionality via MidiUsbHandler
ui: addition of CanvasDescriptor::screenSaverTimeout setting turns off display after as many milliseconds. Useful for preventing screen burn-in on sensitive displays like OLEDs.
usb_host: basic support for Mass Storage USB host class has been added.
fatfs: interface has been reworked, and now supports mounting SDMMC, and/or USB drives. Multi-volume usage with simultaneous use of both is supported.
core: added new C++ Pin type that is constexpr friendly, and backwards compatible with existing C-style dsy_gpio_pin type.
- the old, dsy_gpio_pin and it's accompanying functions should no longer be used, and will be removed in a later version of the library.
gpio: added new C++ API for access to GPIO
- the old, dsy_gpio and it's accompanying functions should no longer be used, and will be removed in a later version of the library.
seed: new pinout consts have been added using the new type. This is to simplify addressing pins on Daisy Seed, and the names are shared with the Arduino Integration.
- These constants live in the daisy::seed namespace.
- Digital pins D0-D30 have been added, these return the equivalent pin as DaisySeed::GetPin(int pinno)
- Analog pins A0-A11 map to the ADC accessible pins labeled as "ADCn" in the pinout diagram.
- The Ax analog pin constants can be used when using digital functions, and vice-versa.

Bug fixes

patch_sm: corrected the order of the gate out pins
sai: fixed occasional output audio channel swap (#268)
sd_diskio: removed extraneous strobing of unrelated GPIO pin
patch: fixed seed1.1 compatibility to properly initialize the primary codec due to special 4-channel audio

Other

switch: Use System::GetNow() rather than the update rate to calculate TimeHeldMs().
- This has also been applied to the Encoder class (since it uses Switch internally).
usb host: ST Middleware for USB Host support has been added to the Middlewares folder
fatfs: changed default FS_LOCK to 0, allowing for more simultaneously open FIL objects.
seed: the contents of DaisySeed::Configure() have been moved into the DaisySeed::Init() function, leaving it empty. This function can now be omitted.
- the function was left in place to preserve backwards compatibility, and will be removed in a future version.

Migrating

switch/encoder: Backwards compatability for Initializing switches/encoders will be maintained until the next breaking change, at which point the update_rate argument will be removed from Switch::Init, and Encoder::Init.
fatfs: If file locking was being used, FS_LOCK will have to be changed back to a non-zero, positive value.

FatFS

Existing code using SDMMC for FatFS only requires a small change to replace the previous dsy_fatfs_init() function:

FatFSInterface fsi;

int main(void) {
  // Daisy, SDMMC, etc. initialization unchanged
  // before:
  dsy_fatfs_init();
  . . .
  // now:
  fsi.Init(FatFSInterface::Config::MEDIA_SD);

  // and instead of the global FATFS object you can now:
  FATFS& fs = fsi.GetSDFileSystem();

  // and instead of the global SDPath object you can now:
  const char* rootpath = fsi.GetSDPath();

  // and then file system works as usual now
  f_mount(&fs, rootpath, 1);
  . . .
}

GPIO

The new GPIO class, and Pin type have been added to replace the previous C versions.

The C versions will remain in place for some time to support backwards compatibility, and give people time to migrate.

To make this easier, the new Pin type can be automatically converted to the old, dsy_gpio_pin to use with classes that have not been updated yet (like Switch, Encoder, etc.)

Here's an example comparing the new and old versions of dealing with GPIO (only one of the many initialization methods is shown here):

//////////////////////////////////////////
// Initialization:
//////////////////////////////////////////
// Old:
dsy_gpio_pin pa1 = {DSY_GPIOA, 1};
dsy_gpio gpio1;
gpio1.mode = DSY_GPIO_OUTPUT_PP;
gpio1.pull = DSY_GPIO_NOPULL;
gpio1.pin = pa1;
dsy_gpio_init(&gpio1);

// New:
Pin pa1 = Pin(PORTA, 1);
GPIO gpio1;
gpio1.Init(pa1, GPIO::Mode::OUTPUT, GPIO::Pull::NOPULL);

//////////////////////////////////////////
// Read
//////////////////////////////////////////
// Old:
uint8_t state = dsy_gpio_read(&gpio1);
// New:
bool state = gpio1.Read();

//////////////////////////////////////////
// Write
//////////////////////////////////////////
// Old:
dsy_gpio_write(&gpio1, 1); // HIGH
dsy_gpio_write(&gpio1, 0); // LOW
// New:
gpio1.Write(true); // HIGH
gpio1.Write(false); // LOW

//////////////////////////////////////////
// Toggle
//////////////////////////////////////////
// Old:
dsy_gpio_toggle(&gpio1);
// New:
gpio1.Toggle();

v2.0.1

Breaking Changes

Features

Bug fixes

qspi: fixed bug with GetData() that wouldn't return correct data when passed actual address instead of normalized offset (i.e. >= 0x90000000)
sdram: fixed occasional hard fault caused by RPDelay, which is now set to 16 (same as in v1.0.0 and earlier)
patch_sm: fixed integer overflow error with VoltageToCode method

Other

v2.0.0

Breaking Changes

qspi: updated from C to C++, and fixed up the API to be cleaner, and simpler to use
sdram: updated from C to C++
- Create SdramHandle class. Gets rid of configurable pin and hardcodes it instead.

Features

adc: added initialization mappings for pins ADC1_INP12 (PC2) and ADC1_INP13 (PC3) (Not accessible on Daisy Seed)
board: added support files for upcoming Daisy Patch SM hardware
rng: added new Random module that provides access to the hardware True Random Number Generator
spi: added DMA Transactions (same type of queue system as I2C) to the SPI Handle class.
util: added new PersistentStorage class for storing/recalling data between power cycles
util: added new VoctCalibration helper class for calibrating ADC inputs
seed: added support for Daisy Seed 1.1 (aka Daisy Seed rev5) hardware. Pin-compatible, with same form factor. WM8731 Codec instead of AK4556.
bootloader: added program-app make target to upload code to the daisy bootloader

Bug fixes

adc: fixed bug with ADC where designs with more than 8 channels AND a mux would halt the ADC.
sdram: changed SdramTiming.RPDelay to 1 to avoid underflow bug.

Other

util: added deinits and memory-aware inits for bootloader compatibility

Migrating

QSPI

DaisySeed hw;
// ...

// Old
hw.qspi_handle.mode = DSY_QSPI_MODE_INDIRECT_POLLING;
dsy_qspi_init(&hw.qspi_handle);
dsy_qspi_erase(address, address + sector_size);
dsy_qspi_write(address, size, (uint8_t*)&some_data);

// New -- qspi mode is automatically handled
hw.qspi.Erase(address, address + sector_size);
hw.qspi.Write(address, size, (uint8_t*)&some_data);

Sdram

This is only applicable if you had a seed-level board that needed to initialize external SDRAM.

//Init
//Old:
dsy_gpio_pin *pin_group;
dsy_sdram_handle sdram_handle;
sdram_handle.state             = DSY_SDRAM_STATE_ENABLE;
pin_group                      = sdram_handle.pin_config;
pin_group[DSY_SDRAM_PIN_SDNWE] = dsy_pin(DSY_GPIOH, 5);
dsy_sdram_init(&sdram_handle);

//New:
SdramHandle sdram;
sdram.Init();

v1.0.0

Breaking Changes

move MidiEvent and related data to daisy namespace.

Features

string: allow more integer types in FixedCapStr::AppendInt()
fifo/stack: Add new methods for searching elements
fifo/stack: Reduce binary size
RgbLed: Added individual setters for each color

Bug fixes

midi: SysEx messages that overflow stop reading data until rx sysexstop. Previously overflowed sysex would cause junk messages.
midi: NoteOns of velocity 0 cause NoteOffs.
usb-serial: fix RX callback function being overwritten

Other

test: add unit testing for midi parser.
tests: add tests for FIFO
docs: Update TODO comment in uart.h to reflect most recent uart update.
ci: add filters to the workflows
ci: add workflow that builds libDaisy with CMake
build: small fixes in CMakeLists.txt
build: report detailed memory usage when linking

Migrating

With using namespace daisy (as typical in example programs) no changes necessary. Otherwise:

// Old
MidiEvent event;

// New
daisy::MidiEvent event;

v0.1.0

Initial Release

Files

CHANGELOG.md

Latest commit

History

CHANGELOG.md

File metadata and controls

libDaisy Changelog

v7.1.0

Features

Bugfixes

v7.0.1

Features

Bugfixes

v7.0.0

Features

Bugfixes

Migrating

v6.0.0

Features

Bug fixes

Bootloader

v5.4.0

Features

Bug Fixes

Other

v5.3.0

Features

Bug Fixes

v5.2.0

Features

Bug fixes

v5.1.0

Features

Bug Fixes

Other

v5.0.0

Breaking Changes

Features

Bug Fixes

Other

Migrating

SPI

MAX11300

v4.0.0

Breaking Changes

Features

Bug Fixes

Other

Migrating

MAX11300

v3.0.0

Breaking Changes

Features

Bug fixes

Other

Migrating

FatFS

GPIO

v2.0.1

Breaking Changes

Features

Bug fixes

Other

v2.0.0

Breaking Changes

Features

Bug fixes

Other

Migrating

QSPI

Sdram

v1.0.0

Breaking Changes

Features

Bug fixes

Other

Migrating

v0.1.0