mini-jump2d.txt

==============================================================================
------------------------------------------------------------------------------
                                                                   *mini.jump2d*
                                                                    *MiniJump2d*
Jump within visible lines via iterative label filtering.

Features:
- Make jump by iterative filtering of possible, equally considered jump
  spots until there is only one. Filtering is done by typing a label
  character that is visualized at jump spot.
- Customizable:
    - Way of computing possible jump spots with opinionated default.
    - Characters used to label jump spots during iterative filtering.
    - Action hooks to be executed at certain events during jump.
    - Allowed windows: current and/or not current.
    - Allowed lines: whether to process blank or folded lines, lines
      before/at/after cursor line, etc. Example: user can configure to look
      for spots only inside current window at or after cursor line.
    Example: user can configure to look for word starts only inside current
    window at or after cursor line with 'j' and 'k' labels performing some
    action after jump.
- Works in Visual and Operator-pending (with dot-repeat) modes.
- Preconfigured ways of computing jump spots (see |MiniJump2d.builtin_opts|).
- Works with multibyte characters.

General overview of how jump is intended to be performed:
- Lock eyes on desired location ("spot") recognizable by future jump.
  Should be within visible lines at place where cursor can be placed.
- Initiate jump. Either by custom keybinding or with a call to
  |MiniJump2d.start()| (allows customization options). This will highlight
  all possible jump spots with their labels (letters from "a" to "z" by
  default). For more details, read |MiniJump2d.start()| and |MiniJump2d.config|.
- Type character that appeared over desired location. If its label was
  unique, jump is performed. If it wasn't unique, possible jump spots are
  filtered to those having the same label character.
- Repeat previous step until there is only one possible jump spot or type `<CR>`
  to jump to first available jump spot. Typing anything else stops jumping
   without moving cursor.

# Setup~

This module needs a setup with `require('mini.jump2d').setup({})` (replace
`{}` with your `config` table). It will create global Lua table
`MiniJump2d` which you can use for scripting or manually (with
`:lua MiniJump2d.*`).

See |MiniJump2d.config| for available config settings.

You can override runtime config settings locally to buffer inside
`vim.b.minijump2d_config` which should have same structure as
`MiniJump2d.config`. See |mini.nvim-buffer-local-config| for more details.

# Example usage~

- Modify default jumping to use only current window at or after cursor line: >
  require('mini.jump2d').setup({
    allowed_lines = { cursor_before = false },
    allowed_windows = { not_current = false },
  })
- `lua MiniJump2d.start(MiniJump2d.builtin_opts.line_start)` - jump to word
  start using combination of options supplied in |MiniJump2d.config| and
  |MiniJump2d.builtin_opts.line_start|.
- `lua MiniJump2d.start(MiniJump2d.builtin_opts.single_character)` - jump
  to single character typed after executing this command.
- See more examples in |MiniJump2d.start| and |MiniJump2d.builtin_opts|.

# Comparisons~

- 'phaazon/hop.nvim':
    - Both are fast, customizable, and extensible (user can write their own
      ways to define jump spots).
    - Both have several builtin ways to specify type of jump (word start,
      line start, one character or query based on user input). 'hop.nvim'
      does that by exporting many targeted Neovim commands, while this
      module has preconfigured basic options leaving others to
      customization with Lua code (see |MiniJump2d.builtin_opts|).
    - 'hop.nvim' computes labels (called "hints") differently. Contrary to
      this module deliberately not having preference of one jump spot over
      another, 'hop.nvim' uses specialized algorithm that produces sequence
      of keys in a slightly biased manner: some sequences are intentionally
      shorter than the others (leading to fewer average keystrokes). They
      are put near cursor (by default) and highlighted differently. Final
      order of sequences is based on distance to the cursor.
    - 'hop.nvim' visualizes labels differently. It is designed to show
      whole sequences at once, while this module intentionally shows only
      current one at a time.
    - 'mini.jump2d' has opinionated default algorithm of computing jump
      spots. See |MiniJump2d.default_spotter|.

# Highlight groups~

* `MiniJump2dSpot` - highlighting of jump spots. By default it uses label
  with highest contrast while not being too visually demanding: white on
  black for dark 'background', black on white for light. If it doesn't
  suit your liking, try couple of these alternatives (or choose your own,
  of course):
    - `hi MiniJump2dSpot gui=reverse` - reverse underlying highlighting (more
      colorful while being visible in any colorscheme).
    - `hi MiniJump2dSpot gui=bold,italic` - bold italic.
    - `hi MiniJump2dSpot gui=undercurl guisp=red` - red undercurl.

To change any highlight group, modify it directly with |:highlight|.

# Disabling~

To disable, set `g:minijump2d_disable` (globally) or `b:minijump2d_disable`
(for a buffer) to `v:true`. Considering high number of different scenarios
and customization intentions, writing exact rules for disabling module's
functionality is left to user. See |mini.nvim-disabling-recipes| for common
recipes.

------------------------------------------------------------------------------
                                                            *MiniJump2d.setup()*
                          `MiniJump2d.setup`({config})
Module setup

Parameters~
{config} `(table)` Module config table. See |MiniJump2d.config|.

Usage~
`require('mini.jump2d').setup({})` (replace `{}` with your `config` table)

------------------------------------------------------------------------------
                                                             *MiniJump2d.config*
                              `MiniJump2d.config`
Module config

Default values:
>
  MiniJump2d.config = {
    -- Function producing jump spots (byte indexed) for a particular line.
    -- For more information see |MiniJump2d.start|.
    -- If `nil` (default) - use |MiniJump2d.default_spotter|
    spotter = nil,

    -- Characters used for labels of jump spots (in supplied order)
    labels = 'abcdefghijklmnopqrstuvwxyz',

    -- Which lines are used for computing spots
    allowed_lines = {
      blank = true, -- Blank line (not sent to spotter even if `true`)
      cursor_before = true, -- Lines before cursor line
      cursor_at = true, -- Cursor line
      cursor_after = true, -- Lines after cursor line
      fold = true, -- Start of fold (not sent to spotter even if `true`)
    },

    -- Which windows from current tabpage are used for visible lines
    allowed_windows = {
      current = true,
      not_current = true,
    },

    -- Functions to be executed at certain events
    hooks = {
      before_start = nil, -- Before jump start
      after_jump = nil, -- After jump was actually done
    },

    -- Module mappings. Use `''` (empty string) to disable one.
    mappings = {
      start_jumping = '<CR>',
    },
  }
<
# Options~

## Spotter function~

Actual computation of possible jump spots is done through spotter function.
It should have the following arguments:
- `line_num` is a line number inside buffer.
- `args` - table with additional arguments:
    - {win_id} - identifier of a window where input line number is from.
    - {win_id_init} - identifier of a window which was current when
      `MiniJump2d.start()` was called.

Its output is a list of byte-indexed positions that should be considered as
possible jump spots for this particular line in this particular window.
Note: for a more aligned visualization this list should be (but not
strictly necessary) sorted increasingly.

Note: spotter function is always called with `win_id` window being
"temporary current" (see |nvim_win_call|). This allows using builtin
Vimscript functions that operate only inside current window.

## Allowed lines~

Option `allowed_lines` controls which lines will be used for computing
possible jump spots:
- If `blank` or `fold` is `true`, it is possible to jump to first column of blank
  line (determined by |prevnonblank|) or first folded one (determined by
  |foldclosed|) respectively. Otherwise they are skipped. These lines are
  not processed by spotter function even if the option is `true`.
- If `cursor_before`, (`cursor_at`, `cursor_after`) is `true`, lines before
  (at, after) cursor line of all processed windows are forwarded to spotter
  function. Otherwise, they don't. This allows control of jump "direction".

## Hooks~

Following hook functions can be used to further tweak jumping experience:
- `before_start` - called without arguments first thing when jump starts.
  One of the possible use cases is to ask for user input and update spotter
  function with it.
- `after_jump` - called after jump was actually done. Useful to make
  post-adjustments (like move cursor to first non-whitespace character).

------------------------------------------------------------------------------
                                                            *MiniJump2d.start()*
                           `MiniJump2d.start`({opts})
Start jumping

Compute possible jump spots, visualize them and wait for iterative filtering.

First computation of possible jump spots~

- Process allowed windows (current and/or not current; controlled by
  `allowed_windows` option) by visible lines from top to bottom. For each
  one see if it is allowed (controlled by `allowed_lines` option). If not
  allowed, then do nothing. If allowed and should be processed by
  `spotter`, process it.
- Apply spotter function from `spotter` option for each appropriate line
  and concatenate outputs. This means that eventual order of jump spots
  aligns with lexicographical order within "window id" - "line number" -
  "position in `spotter` output" tuples.
- For each possible jump compute its label: a single character from
  `labels` option used to filter jump spots. Each possible label character
  might be used more than once to label several "consecutive" jump spots.
  It is done in an optimal way under assumption of no preference of one
  spot over another. Basically, it means "use all labels at each step of
  iterative filtering as equally as possible".

Visualization~

Current label for each possible jump spot is shown at that position
overriding everything underneath it.

Iterative filtering~

Labels of possible jump spots are computed in order to use them as equally
as possible.

Example:
- With `abc` as `labels` option, initial labels for 10 possible jumps
  are "aaaabbbccc". As there are 10 spots which should be "coded" with 3
  symbols, at least 2 symbols need 3 steps to filter them out. With current
  implementation those are always the "first ones".
- After typing `a`, it filters first four jump spots and recomputes its
  labels to be "aabc".
- After typing `a` again, it filters first two spots and recomputes its
  labels to be "ab".
- After typing either `a` or `b` it filters single spot and makes jump.

With default 26 labels for most real-world cases 2 steps is enough for
default spotter function. Rarely 3 steps are needed with several windows.

Parameters~
{opts} `(table)` Configuration of jumping, overriding global and buffer
  local values.config|. Has the same structure as |MiniJump2d.config|
  without <mappings> field. Extra allowed fields:
    - <hl_group> - which highlight group to use (default: "MiniJump2dSpot").

Usage~
- Start default jumping:
  `MiniJump2d.start()`
- Jump to word start:
  `MiniJump2d.start(MiniJump2d.builtin_opts.word_start)`
- Jump to single character from user input (follow by typing one character):
  `MiniJump2d.start(MiniJump2d.builtin_opts.single_character)`
- Jump to first character of punctuation group only inside current window
  which is placed at cursor line; visualize with 'hl-Search': >
  MiniJump2d.start({
    spotter = MiniJump2d.gen_pattern_spotter('%p+'),
    allowed_lines = { cursor_before = false, cursor_after = false },
    allowed_windows = { not_current = false },
    hl_group = 'Search'
  })

See also~
|MiniJump2d.config|

------------------------------------------------------------------------------
                                                             *MiniJump2d.stop()*
                              `MiniJump2d.stop`()
Stop jumping

------------------------------------------------------------------------------
                                              *MiniJump2d.gen_pattern_spotter()*
              `MiniJump2d.gen_pattern_spotter`({pattern}, {side})
Generate spotter for Lua pattern

Parameters~
{pattern} `(string|nil)` Lua pattern. Default: `'[^%s%p]+'` which matches group
  of "non-whitespace non-punctuation characters" (basically a way of saying
  "group of alphanumeric characters" that works with multibyte characters).
{side} `(string|nil)` Which side of pattern match should be considered as
  jumping spot. Should be one of 'start' (start of match, default), 'end'
  (inclusive end of match), or 'none' (match for spot is done manually
  inside pattern with plain `()` matching group).

Usage~
- Match any punctuation:
  `MiniJump2d.gen_pattern_spotter('%p')`
- Match first from line start non-whitespace character:
  `MiniJump2d.gen_pattern_spotter('^%s*%S', 'end')`
- Match start of last word:
  `MiniJump2d.gen_pattern_spotter('[^%s%p]+[%s%p]-$', 'start')`
- Match letter followed by another letter (example of manual matching
  inside pattern):
  `MiniJump2d.gen_pattern_spotter('%a()%a', 'none')`

------------------------------------------------------------------------------
                                                    *MiniJump2d.default_spotter*
                          `MiniJump2d.default_spotter`
Default spotter function

Spot is possible for jump if it is one of the following:
- Start or end of non-whitespace character group.
- Alphanumeric character followed or preceeded by punctuation (useful for
  snake case names).
- Start of uppercase character group (useful for camel case names). Usually
  only Lating alphabet is recognized due to Lua patterns shortcomings.

These rules are derived in an attempt to balance between two intentions:
- Allow as much useful jumping spots as possible.
- Make labeled jump spots easily distinguishable.

Usually takes from 2 to 3 keystrokes to get to destination.

------------------------------------------------------------------------------
                                                       *MiniJump2d.builtin_opts*
                           `MiniJump2d.builtin_opts`
Table with builtin `opts` values for |MiniJump2d.start()|

Each element of table is itself a table defining one or several options for
`MiniJump2d.start()`. Read help description to see which options it defines
(like in |MiniJump2d.builtin_opts.line_start|).

Usage~
Using |MiniJump2d.builtin_opts.line_start| as example:
- Command:
  `:lua MiniJump2d.start(MiniJump2d.builtin_opts.line_start)`
- Custom mapping: >
  vim.api.nvim_set_keymap(
    'n', '<CR>',
    '<Cmd>lua MiniJump2d.start(MiniJump2d.builtin_opts.line_start)<CR>', {}
  )
- Inside |MiniJump2d.setup| (make sure to use all defined options): >
  local jump2d = require('mini.jump2d')
  local jump_line_start = jump2d.builtin_opts.line_start
  jump2d.setup({
    spotter = jump_line_start.spotter,
    hooks = { after_jump = jump_line_start.hooks.after_jump }
  })
<

------------------------------------------------------------------------------
                                               *MiniJump2d.builtin_opts.default*
                       `MiniJump2d.builtin_opts.default`
Jump with |MiniJump2d.default_spotter()|

Defines `spotter`.

------------------------------------------------------------------------------
                                            *MiniJump2d.builtin_opts.line_start*
                      `MiniJump2d.builtin_opts.line_start`
Jump to line start

Defines `spotter` and `hooks.after_jump`.

------------------------------------------------------------------------------
                                            *MiniJump2d.builtin_opts.word_start*
                      `MiniJump2d.builtin_opts.word_start`
Jump to word start

Defines `spotter`.

------------------------------------------------------------------------------
                                      *MiniJump2d.builtin_opts.single_character*
                   `MiniJump2d.builtin_opts.single_character`
Jump to single character taken from user input

Defines `spotter`, `allowed_lines.blank`, `allowed_lines.fold`, and
`hooks.before_start`.

------------------------------------------------------------------------------
                                                 *MiniJump2d.builtin_opts.query*
                        `MiniJump2d.builtin_opts.query`
Jump to query taken from user input

Defines `spotter`, `allowed_lines.blank`, `allowed_lines.fold`, and
`hooks.before_start`.


 vim:tw=78:ts=8:noet:ft=help:norl: