Skip to content

Controller pairing guide

Jump to bottom
Jacques Gagnon edited this page Jan 15, 2023 · 65 revisions

Table of contents

0 - Your controller not in the list?

I can add support for it if it's uniquely identifiable in one of it's mode of operation.
Follow this guide to get me a Bluetooth trace of it:
Getting Bluetooth HCI trace with Windows 10

1 - List of tested Bluetooth devices

  • Controller may have multiple hardware revision, only the ones listed under Product Number were tested.
  • Controller behavior may change between their various firmware version, only the firmware listed under Firmware is supported.
  • Controller may have various mode of operation, only the ones listed under Mode is supported.
  • Controller often spoof the name of another ones and may not be detectable, for those a mapping preset other than default may be required and is listed under Mapping preset.
  • Issues reproduced by developer are listed under Known issues.
  • Issues reported by user but not reproduced are listed under Unconfirm issues.
Name Product Number Firmware Mode Mapping Src Label Mapping preset Pairing Guide Known issues Un-confirm issues
8bitdo GBros. Adapter 83GA v2.26 Xinput Game Cube Default Gamepad 7 #523
8bitdo M30 Bluetooth 80HA v1.15 Xinput Saturn Default Gamepad 7, 7.3
8bitdo N30 Arcade Stick NS30 v5.10 Xinput Xbox One S / X|S Default Gamepad 7
8bitdo N64 RB8-N64 v2.00 HID Generic N64 Default Gamepad
8bitdo SF30 Pro 80DB v2.00 Xinput 8bitdo SN30 / SF30 Default Gamepad 7
8bitdo S30 Modkit Xinput Saturn Default Gamepad 7, 7.3
8bitdo N30 Modkit Xinput NES Default Gamepad 7, 7.3
Exlene GameCube 2021-11 Xinput (but they call it IOS) Exlene Game Cube Exlene GameCube 12
Hyperkin Admiral N64 MO7389-AP v1.5.010722 Switch N64 Default Gamepad 13
Microsoft Xbox Adaptive 1836 5.15.3168.0 BT Xbox One S / X|S Default Gamepad 4 #441
Microsoft Xbox One S 1708 5.15.3168.0 BT Xbox One S / X|S Default Gamepad 4 #441
Microsoft Xbox Series X|S 1954 5.15.3168.0 BT Xbox One S / X|S Default Gamepad 4 #441
Nintendo Switch Famicom & NES HAC-033, 034, 035, 036 Switch Switch NES Default Gamepad 6 #146 #468 #473
Nintendo Switch Joycon (Dual) HAC-015, 016 Switch Switch Joycon Switch Left/Right Joycon Upright 6.3 #146 #468 #473
Nintendo Switch Joycon (Single) HAC-015, 016 Switch Switch Joycon Default Gamepad 6 #146 #468 #473
Nintendo Switch MD & Genesis 3btns HAC-045 Switch Switch MD / Genesis Default Gamepad 6 #146 #468 #473
Nintendo Switch MegaDrive 6btns HAC-046 Switch Switch MD / Genesis Default Gamepad 6 #146 #468 #473
Nintendo Switch N64 HAC-043 Switch Switch N64 Default Gamepad 6 #146 #468 #473
Nintendo Switch Pro HAC-013 Switch WiiU / Switch Pro Default Gamepad 6 #146 #468 #473
Nintendo Switch SFC & SNES HAC-042 Switch Switch SNES Default Gamepad 6 #146 #468 #473
Nintendo Wiimote RVL-036 Wii Wiimote Default Gamepad 5
Nintendo Wiimote + Classic RVL-005 Wii Wiimote + Classic Default Gamepad 5
Nintendo Wiimote + Classic Pro RVL-005 (-02) Wii Wiimote + Classic Pro Default Gamepad 5
Nintendo Wiimote + Nunchuck RVL-004 Wii Wiimote + Nunchuck Default Gamepad 5
Nintendo WiiU Pro WUP-005 Wii WiiU / Switch Pro Default Gamepad 5 #3
PowerA GameCube 1511638-01 Switch GameCube Default Gamepad 6
Retro-Bit SEGA Saturn Bluetooth v1.02 Xinput Saturn Default Gamepad 8
Retro Fighters Brawler64 Bluetooth Switch N64 Default Gamepad 11.1.1
Retro Fighters Brawler64 Bluetooth Xinput N64 Retro Fighters Brawlers64 Xinput 11.1.2
Retro Fighters Warrior Adapter Xinput Game Cube Default Gamepad 10
Sony PS3 DualShock 3 PS3 PS3 Default Gamepad 2
Sony PS3 Sixaxis PS3 PS3 Default Gamepad 2
Sony PS4 DualShock 4 PS4 PS4 / PS5 Default Gamepad 3
Sony PS5 DualSense CFI-ZCT1W 0307 PS5 PS4 / PS5 Default Gamepad 3
Valve Steam Controller 1001 0x5B0F21BD (2018-05-30) Lizard (BLE) KB & Mouse DC FPS for Steam ctrl lizard 9

2 - PS3 Pairing Guide

  • Note only official PS3 controller are supported.

2.1 - First pairing

2.1.1 - Windows

  1. Download and install Sixaxis Pair Tool
  2. Determine BlueRetro MAC address

  • Open https://blueretro.io/ in a chrome web browser (desktop/android)

  • Navigate to "BlueRetro System Manager"

  • Click on "Connect BlueRetro"

  • Pair your device

    On connection the MAC address of the device will be shown. Write it down.

    Connected to:BlueRetro_XX_XXXX
(XX:XX:XX:XX:XX:XX)[v.x.x.x]
  1. Connect your PS3 controller to PC using USB cable.
  2. Launch Sixaxis pair tool and type in the address found in step #2.
  3. Click update, once done disconnect the controller from PC.
  4. Boot up BlueRetro and press the PS button, the controller should connect to BlueRetro.

2.1.2 - OSX

  1. Install Prerequisites (macOS)

  • Install Homebrew https://brew.sh

  • Install required libs & packages

    brew install wget libusb libusb-compat

  1. Compile sixpair binary

    mkdir ~/Documents/sixpair
cd ~/Documents/sixpair
wget -O sixpair.c https://gist.github.com/wouterds/4ab5715966812009d634e3d034abc7fc/raw
gcc -o sixpair sixpair.c -lusb

    If everything went well you should now have a sixpair executable at ~/Documents/sixpair.

  2. Determine BlueRetro MAC address

  • Open https://blueretro.io/ in a chrome web browser (desktop/android)

  • Navigate to "BlueRetro System Manager"

  • Click on "Connect BlueRetro"

  • Pair your device

    On connection the MAC address of the device will be shown. Write it down.

    Connected to:BlueRetro_XX_XXXX
(XX:XX:XX:XX:XX:XX)[v.x.x.x]

  • Open a shell terminal and set the master PS3 address to BlueRetro MAC address

    .~/Documents/sixpair/sixpair XX:XX:XX:XX:XX:XX

2.2 - Reconnect

  1. Simply press PS button to reconnect to BlueRetro.

3 - PS4 & PS5 Pairing Guide

3.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Press & hold simultaneously Share & PS buttons until the LED blink white.
  3. Color on controller will change once pairing is complete.

3.2 - Reconnect

  1. Simply press PS button to reconnect to BlueRetro.

4 - Xbox Pairing Guide

Update firmware via the Xbox accessories Win10 app.

4.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power on controller via Xbox button and then hold the black sync button until the logo blink.
  3. Logo will stop blinking on controller once pairing is complete.

4.2 - Reconnect

  1. Simply hold Xbox button for a small moment to power on controller and it will reconnect to BlueRetro.

5 - Wii & WiiU Pro Pairing Guide

  • 1+2 pairing is not supported.

5.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Press red Sync button
  3. LEDs will stop blinking on controller once pairing is complete.

5.2 - Reconnect

  1. Simply press any button on controller and it will reconnect to BlueRetro.

6 - Switch Pairing Guide

6.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Press and hold sync button until LEDs move in a left/right pattern.
  3. LEDs will stop pattern on controller once pairing is complete.

6.2 - Reconnect

  1. Simply press any button twice on controller and it will reconnect to BlueRetro.

6.3 - Dual Joycon Pairing Guide

  1. Go to https://blueretro.io/blueretro_presets.html and connect to your BlueRetro.
  2. First select output 1 and select "Switch Left Joycon Upright" click save, wait for green text to appear.
    chrome_CosPbgOsVu
  3. Then select output 2 and select "Switch Right Joycon Upright" click save, wait for green text to appear.
    chrome_lYNgsZs9ih
  4. Then pair the joycon with blueretro separately using the sync button hidden on the sliding side.
    It's important to connect the left joycon first, then connect the right joycon
  5. After that you can clip them on the middle support and they should function as one controller.

7 - 8bitdo Pairing Guide

Update firmware via the 8bitdo Upgrade tool Win10 app.

7.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power up 8bitdo controller in Xinput mode (Start + X or set switch to X) (Only Xinput mode supported!!)
  3. Press and hold sync button until LEDs flash.
  4. LEDs will stop pattern on controller once pairing is complete.

7.2 - Reconnect

  1. Simply press Start on controller and it will reconnect to BlueRetro.

7.3 - D-pad as Joystick or D-pad configuration

Most 8bitdo controller are configured to have the D-pad emulate a joystick by default. In most case for BlueRetro you will want to configure it as a d-pad.

See 8bitdo support page FAQs for each controller for more info.

  • 8bitdo S30 Modkit: Hold Up + L + R for 5 seconds
  • 8bitdo N30 Modkit: Hold Up + Select for 5 seconds
  • 8bitdo M30 Bluetooth: Hold Up + Select for 5 seconds

8 - Retro-Bit Pairing Guide

8.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power up Retro-Bit controller in Xinput mode (Home + X) (Only Xinput mode supported!!)
  3. If done properly 2 LEDs will flash.
  4. LEDs will stop flashing on controller once pairing is complete and rumble will trigger.

8.2 - Reconnect

  1. Simply press Homeon controller and it will reconnect to BlueRetro.

9 - Steam controller Pairing Guide

9.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power on controller by holding B and then pressing the Steam button.
  3. Logo will stop blinking on controller once pairing is complete.

9.2 - Reconnect

  1. Simply press Steam button to power on controller and it will reconnect to BlueRetro.

10 - RetroFighters Warrior Adapter Paring Guide

10.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power on adapter by holding Home + Minus simultaneously until LED start blinking fast.
  3. LED will stop blinking once pairing is complete.

10.2 - Reconnect

  1. Simply press Home button to power on adapter and it will reconnect to BlueRetro.

11 - RetroFighters Brawler64 Bluetooth Paring Guide

11.1 - First pairing

11.1.1 - Switch Mode

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power up Brawler64 by holding sync button until LEDs move in a up/down pattern.
  3. LED will stop blinking once pairing is complete.

11.1.2 - Xinput Mode

In this mode the controller will mock an Xbox controller and can't be uniquely identified. As such you need to load the RetroFighters Brawlers64 Xinput preset.

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power up Brawler64 by holding both B & sync buttons until LEDs 1 & 4 start blinking.
  3. LED will stop blinking once pairing is complete and LEDs 1 & 4 will be on to indicate Xinput mode.

11.2 - Reconnect

  1. Simply press any button a few time to power it on and it will reconnect to BlueRetro.

12 - Exlene GameCube Paring Guide

The controller will mock an Xbox controller and can't be uniquely identified. As such you need to load the Exlene GameCube preset.

12.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power up the Exlene controller by holding Y + Home simultaneously until LED start blinking fast.
  3. LED will stop blinking once pairing is complete.

12.2 - Reconnect

  1. Simply press Home button to power on Exlene controller and it will reconnect to BlueRetro.

13 - Hyperkin Admiral Paring Guide

13.1 - First pairing

  1. Boot up BlueRetro and make sure adapter is in inquiry mode (LED pulsing)
  2. Power up the Exlene controller by holding Y + Home simultaneously until LED start blinking fast.
  3. LED will stop blinking once pairing is complete.

13.2 - Reconnect

  1. It's important to press the A button to power on the Admiral controller as it's select the default internal mapping of the controller.
    It will reconnect to BlueRetro after doing so.
Clone this wiki locally