UDP receive don't work.

[nopnop2002]

Thank you for great work.

A TCP transmission, TCP reception, and UDP transmission work fine, but UDP reception does not work.

This is my sketch:

#include <SPI.h>
#include <ESP8266WiFi.h>
#include <WiFiUdp.h>
#include <W5500lwIP.h>   // https://github.com/d-a-v/W5500lwIP

#define CSPIN D2

Wiznet5500lwIP eth(SPI, CSPIN);
byte mac[] = {0x00, 0xAA, 0xBB, 0xCC, 0xDE, 0x02};


// Your NTP Server
#define NTP_SERVER     "pool.ntp.org"

// local port to listen for UDP packets
#define LOCAL_PORT      8888

// NTP time stamp is in the first 48 bytes of the message
#define NTP_PACKET_SIZE 48

// NTP time stamp is in the first 48 bytes of the message
byte packetBuffer[NTP_PACKET_SIZE];

// Time of last packet transmission(ms)
unsigned long lastSendPacketTime = 0;

// A UDP instance to let us send and receive packets over UDP
WiFiUDP udp;

// send an NTP request to the time server at the given address
void sendNTPpacket()
{
  Serial.println("\nsending NTP packet...");
  // set all bytes in the buffer to 0
  memset(packetBuffer, 0, NTP_PACKET_SIZE);
  // Initialize values needed to form NTP request
  // (see URL above for details on the packets)
  packetBuffer[0] = 0b11100011;   // LI, Version, Mode
  packetBuffer[1] = 0;     // Stratum, or type of clock
  packetBuffer[2] = 6;     // Polling Interval
  packetBuffer[3] = 0xEC;  // Peer Clock Precision
  // 8 bytes of zero for Root Delay & Root Dispersion
  packetBuffer[12]  = 49;
  packetBuffer[13]  = 0x4E;
  packetBuffer[14]  = 49;
  packetBuffer[15]  = 52;

  // all NTP fields have been given values, now
  // you can send a packet requesting a timestamp:
  udp.beginPacket(NTP_SERVER, 123); //NTP requests are to port 123
  udp.write(packetBuffer, NTP_PACKET_SIZE);
  udp.endPacket();
}

void setup()
{
  Serial.begin(115200);
  Serial.println();
  Serial.print(ESP.getFullVersion());
  Serial.println();
  
  SPI.begin();
  SPI.setBitOrder(MSBFIRST);
  SPI.setDataMode(SPI_MODE0);
  SPI.setFrequency(40000000);

  eth.setDefault(); // use ethernet for default route
  int present = eth.begin(mac);
  if (!present) {
    Serial.println("no ethernet hardware present");
    while(1);
  }
  
  Serial.print("connecting ethernet");
  while (!eth.connected()) {
    Serial.print(".");
    delay(1000);
  }
  Serial.println();
  Serial.print("ethernet ip address: ");
  Serial.println(eth.localIP());
  Serial.print("ethernet subnetMask: ");
  Serial.println(eth.subnetMask());
  Serial.print("ethernet gateway: ");
  Serial.println(eth.gatewayIP());


  Serial.println("Starting UDP");
  udp.begin(LOCAL_PORT);
}


void loop()
{
  long now = millis();
  if (now - lastSendPacketTime > 5000) { // 5 seconds passed
    // Send time request to NTP server
    sendNTPpacket();
    lastSendPacketTime = now;
  }

  // wait to see if a reply is available
  if ( udp.parsePacket() ) {
    //Serial.print("packet received, length=");
    //Serial.println(cb);
    // We've received a packet, read the data from it
    udp.read(packetBuffer, NTP_PACKET_SIZE); // read the packet into the buffer

    //the timestamp starts at byte 40 of the received packet and is four bytes,
    // or two words, long. First, esxtract the two words:
    unsigned long highWord = word(packetBuffer[40], packetBuffer[41]);
    unsigned long lowWord = word(packetBuffer[42], packetBuffer[43]);

    // combine the four bytes (two words) into a long integer
    // this is NTP time (seconds since Jan 1 1900):
    unsigned long secsSince1900 = highWord << 16 | lowWord;
    Serial.print("Seconds since Jan 1 1900 = " );
    Serial.println(secsSince1900);

    // now convert NTP time into everyday time:
    // Unix time starts on Jan 1 1970. In seconds, that's 2208988800:
    const unsigned long seventyYears = 2208988800UL;
    // subtract seventy years:
    unsigned long epoch = secsSince1900 - seventyYears; 
    Serial.print("Unix time = ");
    Serial.println(epoch);
  
  }
}

This is Serial.print:

SDK:2.2.2-dev(38a443e)/Core:2.7.1=20701000/lwIP:STABLE-2_1_2_RELEASE/glue:1.2-30-g92add50/BearSSL:5c771be
connecting ethernet...
ethernet ip address: 192.168.10.179
ethernet subnetMask: 255.255.255.0
ethernet gateway: 192.168.10.1
Starting UDP

sending NTP packet...

sending NTP packet...

sending NTP packet...

sending NTP packet...

Do you have any help.
Thank you.

[d-a-v]

Can you try to use esp8266/Arduino#6680 instead of this repository ?
It will be the one integrated in the esp8266 arduino core (and it is more advanced) (and it will be the one we will debug in case of issue)

[nopnop2002]

Thank you for your quick response.
I will try.

[d-a-v]

I tried and UDP is running.

[nopnop2002]

Will this issue be fixed in core version 3.0.0?

[d-a-v]

Yes. You can already try gamma release (v0.0.3) at https://d-a-v.github.io .

[nopnop2002]

Thank you again.