lockup_detector: Combine nmi_watchdog and softlockup detector

The new nmi_watchdog (which uses the perf event subsystem) is very
similar in structure to the softlockup detector.  Using Ingo's
suggestion, I combined the two functionalities into one file:
kernel/watchdog.c.

Now both the nmi_watchdog (or hardlockup detector) and softlockup
detector sit on top of the perf event subsystem, which is run every
60 seconds or so to see if there are any lockups.

To detect hardlockups, cpus not responding to interrupts, I
implemented an hrtimer that runs 5 times for every perf event
overflow event.  If that stops counting on a cpu, then the cpu is
most likely in trouble.

To detect softlockups, tasks not yielding to the scheduler, I used the
previous kthread idea that now gets kicked every time the hrtimer fires.
If the kthread isn't being scheduled neither is anyone else and the
warning is printed to the console.

I tested this on x86_64 and both the softlockup and hardlockup paths
work.

V2:
- cleaned up the Kconfig and softlockup combination
- surrounded hardlockup cases with #ifdef CONFIG_PERF_EVENTS_NMI
- seperated out the softlockup case from perf event subsystem
- re-arranged the enabling/disabling nmi watchdog from proc space
- added cpumasks for hardlockup failure cases
- removed fallback to soft events if no PMU exists for hard events

V3:
- comment cleanups
- drop support for older softlockup code
- per_cpu cleanups
- completely remove software clock base hardlockup detector
- use per_cpu masking on hard/soft lockup detection
- #ifdef cleanups
- rename config option NMI_WATCHDOG to LOCKUP_DETECTOR
- documentation additions

V4:
- documentation fixes
- convert per_cpu to __get_cpu_var
- powerpc compile fixes

V5:
- split apart warn flags for hard and soft lockups

TODO:
- figure out how to make an arch-agnostic clock2cycles call
  (if possible) to feed into perf events as a sample period

[fweisbec: merged conflict patch]

Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
LKML-Reference: <1273266711-18706-2-git-send-email-dzickus@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

Author: dzickusrh

Documentation/kernel-parameters.txt

@@ -1777,6 +1777,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nousb		[USB] Disable the USB subsystem
 
+	nowatchdog	[KNL] Disable the lockup detector.
+
 	nowb		[ARM]
 
 	nox2apic	[X86-64,APIC] Do not enable x2APIC mode.

arch/x86/include/asm/nmi.h

@@ -17,7 +17,7 @@ int do_nmi_callback(struct pt_regs *regs, int cpu);
 
 extern void die_nmi(char *str, struct pt_regs *regs, int do_panic);
 extern int check_nmi_watchdog(void);
-#if !defined(CONFIG_NMI_WATCHDOG)
+#if !defined(CONFIG_LOCKUP_DETECTOR)
 extern int nmi_watchdog_enabled;
 #endif
 extern int avail_to_resrv_perfctr_nmi_bit(unsigned int);

arch/x86/kernel/apic/Makefile

@@ -3,10 +3,10 @@
 #
 
 obj-$(CONFIG_X86_LOCAL_APIC)	+= apic.o apic_noop.o probe_$(BITS).o ipi.o
-ifneq ($(CONFIG_NMI_WATCHDOG),y)
+ifneq ($(CONFIG_LOCKUP_DETECTOR),y)
 obj-$(CONFIG_X86_LOCAL_APIC)	+= nmi.o
 endif
-obj-$(CONFIG_NMI_WATCHDOG)	+= hw_nmi.o
+obj-$(CONFIG_LOCKUP_DETECTOR)	+= hw_nmi.o
 
 obj-$(CONFIG_X86_IO_APIC)	+= io_apic.o
 obj-$(CONFIG_SMP)		+= ipi.o

arch/x86/kernel/apic/hw_nmi.c

@@ -89,7 +89,7 @@ int hw_nmi_is_cpu_stuck(struct pt_regs *regs)
 
 u64 hw_nmi_get_sample_period(void)
 {
-	return cpu_khz * 1000;
+	return (u64)(cpu_khz) * 1000 * 60;
 }
 
 #ifdef ARCH_HAS_NMI_WATCHDOG

arch/x86/kernel/traps.c

@@ -406,15 +406,15 @@ static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
 							== NOTIFY_STOP)
 			return;
 
-#ifndef CONFIG_NMI_WATCHDOG
+#ifndef CONFIG_LOCKUP_DETECTOR
 		/*
 		 * Ok, so this is none of the documented NMI sources,
 		 * so it must be the NMI watchdog.
 		 */
 		if (nmi_watchdog_tick(regs, reason))
 			return;
 		if (!do_nmi_callback(regs, cpu))
-#endif /* !CONFIG_NMI_WATCHDOG */
+#endif /* !CONFIG_LOCKUP_DETECTOR */
 			unknown_nmi_error(reason, regs);
 #else
 		unknown_nmi_error(reason, regs);

include/linux/nmi.h

@@ -20,7 +20,7 @@ extern void touch_nmi_watchdog(void);
 extern void acpi_nmi_disable(void);
 extern void acpi_nmi_enable(void);
 #else
-#ifndef CONFIG_NMI_WATCHDOG
+#ifndef CONFIG_LOCKUP_DETECTOR
 static inline void touch_nmi_watchdog(void)
 {
 	touch_softlockup_watchdog();
@@ -51,12 +51,12 @@ static inline bool trigger_all_cpu_backtrace(void)
 }
 #endif
 
-#ifdef CONFIG_NMI_WATCHDOG
+#ifdef CONFIG_LOCKUP_DETECTOR
 int hw_nmi_is_cpu_stuck(struct pt_regs *);
 u64 hw_nmi_get_sample_period(void);
-extern int nmi_watchdog_enabled;
+extern int watchdog_enabled;
 struct ctl_table;
-extern int proc_nmi_enabled(struct ctl_table *, int ,
+extern int proc_dowatchdog_enabled(struct ctl_table *, int ,
 			void __user *, size_t *, loff_t *);
 #endif
 

include/linux/sched.h

@@ -346,6 +346,12 @@ extern int proc_dohung_task_timeout_secs(struct ctl_table *table, int write,
 					 size_t *lenp, loff_t *ppos);
 #endif
 
+#ifdef CONFIG_LOCKUP_DETECTOR
+extern int proc_dowatchdog_thresh(struct ctl_table *table, int write,
+				  void __user *buffer,
+				  size_t *lenp, loff_t *ppos);
+#endif
+
 /* Attach to any functions which should be ignored in wchan output. */
 #define __sched		__attribute__((__section__(".sched.text")))
 

init/Kconfig

@@ -944,8 +944,11 @@ config PERF_USE_VMALLOC
 
 config PERF_EVENTS_NMI
 	bool
+	depends on PERF_EVENTS
 	help
-	  Arch has support for nmi_watchdog
+	  System hardware can generate an NMI using the perf event
+	  subsystem.  Also has support for calculating CPU cycle events
+	  to determine how many clock cycles in a given period.
 
 menu "Kernel Performance Events And Counters"
 

kernel/Makefile

@@ -76,9 +76,8 @@ obj-$(CONFIG_GCOV_KERNEL) += gcov/
 obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
 obj-$(CONFIG_KPROBES) += kprobes.o
 obj-$(CONFIG_KGDB) += kgdb.o
-obj-$(CONFIG_DETECT_SOFTLOCKUP) += softlockup.o
-obj-$(CONFIG_NMI_WATCHDOG) += nmi_watchdog.o
 obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
+obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
 obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
 obj-$(CONFIG_SECCOMP) += seccomp.o
 obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o

kernel/sysctl.c

@@ -74,7 +74,7 @@
 #include <scsi/sg.h>
 #endif
 
-#ifdef CONFIG_NMI_WATCHDOG
+#ifdef CONFIG_LOCKUP_DETECTOR
 #include <linux/nmi.h>
 #endif
 
@@ -686,16 +686,25 @@ static struct ctl_table kern_table[] = {
 		.mode		= 0444,
 		.proc_handler	= proc_dointvec,
 	},
-#if defined(CONFIG_NMI_WATCHDOG)
+#if defined(CONFIG_LOCKUP_DETECTOR)
 	{
-		.procname       = "nmi_watchdog",
-		.data           = &nmi_watchdog_enabled,
+		.procname       = "watchdog",
+		.data           = &watchdog_enabled,
 		.maxlen         = sizeof (int),
 		.mode           = 0644,
-		.proc_handler   = proc_nmi_enabled,
+		.proc_handler   = proc_dowatchdog_enabled,
+	},
+	{
+		.procname	= "watchdog_thresh",
+		.data		= &softlockup_thresh,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dowatchdog_thresh,
+		.extra1		= &neg_one,
+		.extra2		= &sixty,
 	},
 #endif
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_NMI_WATCHDOG)
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86) && !defined(CONFIG_LOCKUP_DETECTOR)
 	{
 		.procname       = "unknown_nmi_panic",
 		.data           = &unknown_nmi_panic,