playing around with bluetoth and uart1 for card reader

Author: chrillomat

arch/arm/boot/dts/imx6qdl-wandboard.dtsi

@@ -361,7 +361,7 @@ reference manual.
 				MX6QDL_PAD_EIM_EB1__GPIO2_IO29		0x0f0b0		/* EIM_EB1 (Wifi Power Enable) */
 				MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x80000000	/* WL_WAKE (unused) */
                                 MX6QDL_PAD_EIM_D29__GPIO3_IO29   	0x80000000
-                                MX6QDL_PAD_EIM_DA13__GPIO3_IO13  	0x80000000 	/* BT_ON */
+                                MX6QDL_PAD_EIM_DA13__GPIO3_IO13  	0x0f0b0 	/* BT_ON */
                                 MX6QDL_PAD_EIM_DA14__GPIO3_IO14  	0x80000000 	/* BT_WAKE */
                                 MX6QDL_PAD_EIM_DA15__GPIO3_IO15  	0x80000000 	/* BT_HOST_WAKE */
 				MX6QDL_PAD_EIM_EB0__GPIO2_IO28		0x1B880         /* Wandboard C1 Revision check */
@@ -456,7 +456,7 @@ reference manual.
 
 &uart1 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart1_3>;
+	pinctrl-0 = <&pinctrl_uart1_2>;
 	fsl,uart-has-rtscts;
         status = "okay";
 };

arch/arm/boot/dts/imx6qdl.dtsi

@@ -1518,8 +1518,8 @@
 		};
 		pinctrl_uart1_3: uart1grp-3 {
 			fsl,pins = <
-				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x1b0b1
+				MX6QDL_PAD_CSI0_DAT11__UART1_TX_DATA 0x1b0b1
 				MX6QDL_PAD_EIM_D20__UART1_CTS_B      0x1b0b1
 				MX6QDL_PAD_EIM_D19__UART1_RTS_B      0x1b0b1
 			>;