Skip to content

Conversation

ohoang7bh
Copy link

No description provided.

@chewitt
Copy link
Owner

chewitt commented Jan 29, 2023

Closing as related to #1 which cannot be accepted. I would also expect to receive a single PR with all changes; not one PR for each file changed. See https://wiki.libreelec.tv/development/git-tutorial for some general advice on git workflow. Hint: do not use the GitHub GUI to edit files.

@chewitt chewitt closed this Jan 29, 2023
chewitt pushed a commit that referenced this pull request Feb 10, 2023
[ Upstream commit 3c46372 ]

This lockdep splat says it better than I could:

================================
WARNING: inconsistent lock state
6.2.0-rc2-07010-ga9b9500ffaac-dirty torvalds#967 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0
{IN-SOFTIRQ-W} state was registered at:
  _raw_spin_lock+0x5c/0xc0
  sch_direct_xmit+0x148/0x37c
  __dev_queue_xmit+0x528/0x111c
  ip6_finish_output2+0x5ec/0xb7c
  ip6_finish_output+0x240/0x3f0
  ip6_output+0x78/0x360
  ndisc_send_skb+0x33c/0x85c
  ndisc_send_rs+0x54/0x12c
  addrconf_rs_timer+0x154/0x260
  call_timer_fn+0xb8/0x3a0
  __run_timers.part.0+0x214/0x26c
  run_timer_softirq+0x3c/0x74
  __do_softirq+0x14c/0x5d8
  ____do_softirq+0x10/0x20
  call_on_irq_stack+0x2c/0x5c
  do_softirq_own_stack+0x1c/0x30
  __irq_exit_rcu+0x168/0x1a0
  irq_exit_rcu+0x10/0x40
  el1_interrupt+0x38/0x64
irq event stamp: 7825
hardirqs last  enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130
hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8
softirqs last  enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8
softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(_xmit_ETHER#2);
  <Interrupt>
    lock(_xmit_ETHER#2);

 *** DEADLOCK ***

3 locks held by kworker/1:3/179:
 #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34

Workqueue: events enetc_tx_onestep_tstamp
Call trace:
 print_usage_bug.part.0+0x208/0x22c
 mark_lock+0x7f0/0x8b0
 __lock_acquire+0x7c4/0x1ce0
 lock_acquire.part.0+0xe0/0x220
 lock_acquire+0x68/0x84
 _raw_spin_lock+0x5c/0xc0
 netif_freeze_queues+0x5c/0xc0
 netif_tx_lock+0x24/0x34
 enetc_tx_onestep_tstamp+0x20/0x100
 process_one_work+0x28c/0x6c0
 worker_thread+0x74/0x450
 kthread+0x118/0x11c

but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.

To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running.

Fixes: 7294380 ("enetc: support PTP Sync packet one-step timestamping")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Feb 10, 2023
[ Upstream commit 241f519 ]

This attempts to avoid circular locking dependency between sock_lock
and hdev_lock:

WARNING: possible circular locking dependency detected
6.0.0-rc7-03728-g18dd8ab0a783 #3 Not tainted
------------------------------------------------------
kworker/u3:2/53 is trying to acquire lock:
ffff888000254130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at:
iso_conn_del+0xbd/0x1d0
but task is already holding lock:
ffffffff9f39a080 (hci_cb_list_lock){+.+.}-{3:3}, at:
hci_le_cis_estabilished_evt+0x1b5/0x500
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (hci_cb_list_lock){+.+.}-{3:3}:
       __mutex_lock+0x10e/0xfe0
       hci_le_remote_feat_complete_evt+0x17f/0x320
       hci_event_packet+0x39c/0x7d0
       hci_rx_work+0x2bf/0x950
       process_one_work+0x569/0x980
       worker_thread+0x2a3/0x6f0
       kthread+0x153/0x180
       ret_from_fork+0x22/0x30
-> #1 (&hdev->lock){+.+.}-{3:3}:
       __mutex_lock+0x10e/0xfe0
       iso_connect_cis+0x6f/0x5a0
       iso_sock_connect+0x1af/0x710
       __sys_connect+0x17e/0x1b0
       __x64_sys_connect+0x37/0x50
       do_syscall_64+0x43/0x90
       entry_SYSCALL_64_after_hwframe+0x62/0xcc
-> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}:
       __lock_acquire+0x1b51/0x33d0
       lock_acquire+0x16f/0x3b0
       lock_sock_nested+0x32/0x80
       iso_conn_del+0xbd/0x1d0
       iso_connect_cfm+0x226/0x680
       hci_le_cis_estabilished_evt+0x1ed/0x500
       hci_event_packet+0x39c/0x7d0
       hci_rx_work+0x2bf/0x950
       process_one_work+0x569/0x980
       worker_thread+0x2a3/0x6f0
       kthread+0x153/0x180
       ret_from_fork+0x22/0x30
other info that might help us debug this:
Chain exists of:
  sk_lock-AF_BLUETOOTH-BTPROTO_ISO --> &hdev->lock --> hci_cb_list_lock
 Possible unsafe locking scenario:
       CPU0                    CPU1
       ----                    ----
  lock(hci_cb_list_lock);
                               lock(&hdev->lock);
                               lock(hci_cb_list_lock);
  lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO);
 *** DEADLOCK ***
4 locks held by kworker/u3:2/53:
 #0: ffff8880021d9130 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
 process_one_work+0x4ad/0x980
 #1: ffff888002387de0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
 at: process_one_work+0x4ad/0x980
 #2: ffff888001ac0070 (&hdev->lock){+.+.}-{3:3}, at:
 hci_le_cis_estabilished_evt+0xc3/0x500
 #3: ffffffff9f39a080 (hci_cb_list_lock){+.+.}-{3:3}, at:
 hci_le_cis_estabilished_evt+0x1b5/0x500

Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 6a5ad25 ("Bluetooth: ISO: Fix possible circular locking dependency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Feb 10, 2023
[ Upstream commit e9d50f7 ]

This fixes the following trace caused by attempting to lock
cmd_sync_work_lock while holding the rcu_read_lock:

kworker/u3:2/212 is trying to lock:
ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at:
hci_cmd_sync_queue+0xad/0x140
other info that might help us debug this:
context-{4:4}
4 locks held by kworker/u3:2/212:
 #0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at:
 process_one_work+0x4dc/0x9a0
 #1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0},
 at: process_one_work+0x4dc/0x9a0
 #2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at:
 hci_cc_le_set_cig_params+0x64/0x4f0
 #3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at:
 hci_cc_le_set_cig_params+0x2f9/0x4f0

Fixes: 26afbd8 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Feb 10, 2023
[ Upstream commit 5aa5610 ]

The cited commit changed class of tc_ht internal mutex in order to avoid
false lock dependency with fs_core node and flow_table hash table
structures. However, hash table implementation internally also includes a
workqueue task with its own lockdep map which causes similar bogus lockdep
splat[0]. Fix it by also adding dedicated class for hash table workqueue
work structure of tc_ht.

[0]:

[ 1139.672465] ======================================================
[ 1139.673552] WARNING: possible circular locking dependency detected
[ 1139.674635] 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 Not tainted
[ 1139.675734] ------------------------------------------------------
[ 1139.676801] modprobe/5998 is trying to acquire lock:
[ 1139.677726] ffff88811e7b93b8 (&node->lock){++++}-{3:3}, at: down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.679662]
               but task is already holding lock:
[ 1139.680703] ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0
[ 1139.682223]
               which lock already depends on the new lock.

[ 1139.683640]
               the existing dependency chain (in reverse order) is:
[ 1139.684887]
               -> #2 (&tc_ht_lock_key){+.+.}-{3:3}:
[ 1139.685975]        __mutex_lock+0x12c/0x14b0
[ 1139.686659]        rht_deferred_worker+0x35/0x1540
[ 1139.687405]        process_one_work+0x7c2/0x1310
[ 1139.688134]        worker_thread+0x59d/0xec0
[ 1139.688820]        kthread+0x28f/0x330
[ 1139.689444]        ret_from_fork+0x1f/0x30
[ 1139.690106]
               -> #1 ((work_completion)(&ht->run_work)){+.+.}-{0:0}:
[ 1139.691250]        __flush_work+0xe8/0x900
[ 1139.691915]        __cancel_work_timer+0x2ca/0x3f0
[ 1139.692655]        rhashtable_free_and_destroy+0x22/0x6f0
[ 1139.693472]        del_sw_flow_table+0x22/0xb0 [mlx5_core]
[ 1139.694592]        tree_put_node+0x24c/0x450 [mlx5_core]
[ 1139.695686]        tree_remove_node+0x6e/0x100 [mlx5_core]
[ 1139.696803]        mlx5_destroy_flow_table+0x187/0x690 [mlx5_core]
[ 1139.698017]        mlx5e_tc_nic_cleanup+0x2f8/0x400 [mlx5_core]
[ 1139.699217]        mlx5e_cleanup_nic_rx+0x2b/0x210 [mlx5_core]
[ 1139.700397]        mlx5e_detach_netdev+0x19d/0x2b0 [mlx5_core]
[ 1139.701571]        mlx5e_suspend+0xdb/0x140 [mlx5_core]
[ 1139.702665]        mlx5e_remove+0x89/0x190 [mlx5_core]
[ 1139.703756]        auxiliary_bus_remove+0x52/0x70
[ 1139.704492]        device_release_driver_internal+0x3c1/0x600
[ 1139.705360]        bus_remove_device+0x2a5/0x560
[ 1139.706080]        device_del+0x492/0xb80
[ 1139.706724]        mlx5_rescan_drivers_locked+0x194/0x6a0 [mlx5_core]
[ 1139.707961]        mlx5_unregister_device+0x7a/0xa0 [mlx5_core]
[ 1139.709138]        mlx5_uninit_one+0x5f/0x160 [mlx5_core]
[ 1139.710252]        remove_one+0xd1/0x160 [mlx5_core]
[ 1139.711297]        pci_device_remove+0x96/0x1c0
[ 1139.722721]        device_release_driver_internal+0x3c1/0x600
[ 1139.723590]        unbind_store+0x1b1/0x200
[ 1139.724259]        kernfs_fop_write_iter+0x348/0x520
[ 1139.725019]        vfs_write+0x7b2/0xbf0
[ 1139.725658]        ksys_write+0xf3/0x1d0
[ 1139.726292]        do_syscall_64+0x3d/0x90
[ 1139.726942]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.727769]
               -> #0 (&node->lock){++++}-{3:3}:
[ 1139.728698]        __lock_acquire+0x2cf5/0x62f0
[ 1139.729415]        lock_acquire+0x1c1/0x540
[ 1139.730076]        down_write+0x8e/0x1f0
[ 1139.730709]        down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.731841]        mlx5_del_flow_rules+0x6f/0x610 [mlx5_core]
[ 1139.732982]        __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core]
[ 1139.734207]        mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core]
[ 1139.735491]        mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core]
[ 1139.736716]        mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core]
[ 1139.738007]        mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core]
[ 1139.739213]        mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core]
[ 1139.740377]        _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core]
[ 1139.741534]        rhashtable_free_and_destroy+0x3be/0x6f0
[ 1139.742351]        mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core]
[ 1139.743512]        mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core]
[ 1139.744683]        mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
[ 1139.745860]        mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core]
[ 1139.747098]        mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
[ 1139.748372]        mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core]
[ 1139.749590]        __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core]
[ 1139.750813]        mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core]
[ 1139.752147]        mlx5e_rep_remove+0x62/0x80 [mlx5_core]
[ 1139.753293]        auxiliary_bus_remove+0x52/0x70
[ 1139.754028]        device_release_driver_internal+0x3c1/0x600
[ 1139.754885]        driver_detach+0xc1/0x180
[ 1139.755553]        bus_remove_driver+0xef/0x2e0
[ 1139.756260]        auxiliary_driver_unregister+0x16/0x50
[ 1139.757059]        mlx5e_rep_cleanup+0x19/0x30 [mlx5_core]
[ 1139.758207]        mlx5e_cleanup+0x12/0x30 [mlx5_core]
[ 1139.759295]        mlx5_cleanup+0xc/0x49 [mlx5_core]
[ 1139.760384]        __x64_sys_delete_module+0x2b5/0x450
[ 1139.761166]        do_syscall_64+0x3d/0x90
[ 1139.761827]        entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.762663]
               other info that might help us debug this:

[ 1139.763925] Chain exists of:
                 &node->lock --> (work_completion)(&ht->run_work) --> &tc_ht_lock_key

[ 1139.765743]  Possible unsafe locking scenario:

[ 1139.766688]        CPU0                    CPU1
[ 1139.767399]        ----                    ----
[ 1139.768111]   lock(&tc_ht_lock_key);
[ 1139.768704]                                lock((work_completion)(&ht->run_work));
[ 1139.769869]                                lock(&tc_ht_lock_key);
[ 1139.770770]   lock(&node->lock);
[ 1139.771326]
                *** DEADLOCK ***

[ 1139.772345] 2 locks held by modprobe/5998:
[ 1139.772994]  #0: ffff88813c1ff0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600
[ 1139.774399]  #1: ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0
[ 1139.775822]
               stack backtrace:
[ 1139.776579] CPU: 3 PID: 5998 Comm: modprobe Not tainted 6.1.0_for_upstream_debug_2022_12_12_17_02 #1
[ 1139.777935] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1139.779529] Call Trace:
[ 1139.779992]  <TASK>
[ 1139.780409]  dump_stack_lvl+0x57/0x7d
[ 1139.781015]  check_noncircular+0x278/0x300
[ 1139.781687]  ? print_circular_bug+0x460/0x460
[ 1139.782381]  ? rcu_read_lock_sched_held+0x3f/0x70
[ 1139.783121]  ? lock_release+0x487/0x7c0
[ 1139.783759]  ? orc_find.part.0+0x1f1/0x330
[ 1139.784423]  ? mark_lock.part.0+0xef/0x2fc0
[ 1139.785091]  __lock_acquire+0x2cf5/0x62f0
[ 1139.785754]  ? register_lock_class+0x18e0/0x18e0
[ 1139.786483]  lock_acquire+0x1c1/0x540
[ 1139.787093]  ? down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.788195]  ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0
[ 1139.788978]  ? register_lock_class+0x18e0/0x18e0
[ 1139.789715]  down_write+0x8e/0x1f0
[ 1139.790292]  ? down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.791380]  ? down_write_killable+0x220/0x220
[ 1139.792080]  ? find_held_lock+0x2d/0x110
[ 1139.792713]  down_write_ref_node+0x7c/0xe0 [mlx5_core]
[ 1139.793795]  mlx5_del_flow_rules+0x6f/0x610 [mlx5_core]
[ 1139.794879]  __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core]
[ 1139.796032]  ? __esw_offloads_unload_rep+0xd0/0xd0 [mlx5_core]
[ 1139.797227]  ? xa_load+0x11a/0x200
[ 1139.797800]  ? __xa_clear_mark+0xf0/0xf0
[ 1139.798438]  mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core]
[ 1139.799660]  mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core]
[ 1139.800821]  mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core]
[ 1139.802049]  ? mlx5_eswitch_get_uplink_priv+0x25/0x80 [mlx5_core]
[ 1139.803260]  mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core]
[ 1139.804398]  ? __cancel_work_timer+0x1c2/0x3f0
[ 1139.805099]  ? mlx5e_tc_unoffload_from_slow_path+0x460/0x460 [mlx5_core]
[ 1139.806387]  mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core]
[ 1139.807481]  _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core]
[ 1139.808564]  rhashtable_free_and_destroy+0x3be/0x6f0
[ 1139.809336]  ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core]
[ 1139.809336]  ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core]
[ 1139.810455]  mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core]
[ 1139.811552]  mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core]
[ 1139.812655]  mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core]
[ 1139.813768]  mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core]
[ 1139.814952]  mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core]
[ 1139.816166]  mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core]
[ 1139.817336]  __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core]
[ 1139.818507]  mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core]
[ 1139.819788]  ? mlx5_eswitch_uplink_get_proto_dev+0x30/0x30 [mlx5_core]
[ 1139.821051]  ? kernfs_find_ns+0x137/0x310
[ 1139.821705]  mlx5e_rep_remove+0x62/0x80 [mlx5_core]
[ 1139.822778]  auxiliary_bus_remove+0x52/0x70
[ 1139.823449]  device_release_driver_internal+0x3c1/0x600
[ 1139.824240]  driver_detach+0xc1/0x180
[ 1139.824842]  bus_remove_driver+0xef/0x2e0
[ 1139.825504]  auxiliary_driver_unregister+0x16/0x50
[ 1139.826245]  mlx5e_rep_cleanup+0x19/0x30 [mlx5_core]
[ 1139.827322]  mlx5e_cleanup+0x12/0x30 [mlx5_core]
[ 1139.828345]  mlx5_cleanup+0xc/0x49 [mlx5_core]
[ 1139.829382]  __x64_sys_delete_module+0x2b5/0x450
[ 1139.830119]  ? module_flags+0x300/0x300
[ 1139.830750]  ? task_work_func_match+0x50/0x50
[ 1139.831440]  ? task_work_cancel+0x20/0x20
[ 1139.832088]  ? lockdep_hardirqs_on_prepare+0x273/0x3f0
[ 1139.832873]  ? syscall_enter_from_user_mode+0x1d/0x50
[ 1139.833661]  ? trace_hardirqs_on+0x2d/0x100
[ 1139.834328]  do_syscall_64+0x3d/0x90
[ 1139.834922]  entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1139.835700] RIP: 0033:0x7f153e71288b
[ 1139.836302] Code: 73 01 c3 48 8b 0d 9d 75 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6d 75 0e 00 f7 d8 64 89 01 48
[ 1139.838866] RSP: 002b:00007ffe0a3ed938 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[ 1139.840020] RAX: ffffffffffffffda RBX: 0000564c2cbf8220 RCX: 00007f153e71288b
[ 1139.841043] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000564c2cbf8288
[ 1139.842072] RBP: 0000564c2cbf8220 R08: 0000000000000000 R09: 0000000000000000
[ 1139.843094] R10: 00007f153e7a3ac0 R11: 0000000000000206 R12: 0000564c2cbf8288
[ 1139.844118] R13: 0000000000000000 R14: 0000564c2cbf7ae8 R15: 00007ffe0a3efcb8

Fixes: 9ba3333 ("net/mlx5e: Avoid false lock depenency warning on tc_ht")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Eli Cohen <elic@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 9, 2023
…kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.2, take #2

- Pass the correct address to mte_clear_page_tags() on initialising
  a tagged page

- Plug a race against a GICv4.1 doorbell interrupt while saving
  the vgic-v3 pending state.
chewitt pushed a commit that referenced this pull request Mar 9, 2023
Jakub Sitnicki says:

====================

This patch set addresses the syzbot report in [1].

Patch #1 has been suggested by Eric [2]. I extended it to cover the rest of
sock_map proto callbacks. Otherwise we would still overflow the stack.

Patch #2 contains the actual fix and bug analysis.
Patches #3 & #4 add coverage to selftests to trigger the bug.

[1] https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/
[2] https://lore.kernel.org/all/CANn89iK2UN1FmdUcH12fv_xiZkv2G+Nskvmq7fG6aA_6VKRf6g@mail.gmail.com/
---
v1 -> v2:
v1: https://lore.kernel.org/r/20230113-sockmap-fix-v1-0-d3cad092ee10@cloudflare.com
[v1 didn't hit bpf@ ML by mistake]

 * pull in Eric's patch to protect against recursion loop bugs (Eric)
 * add a macro helper to check if pointer is inside a memory range (Eric)
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 9, 2023
…eues().

Christoph Paasch reported that commit b5fc292 ("inet6: Remove
inet6_destroy_sock() in sk->sk_prot->destroy().") started triggering
WARN_ON_ONCE(sk->sk_forward_alloc) in sk_stream_kill_queues().  [0 - 2]
Also, we can reproduce it by a program in [3].

In the commit, we delay freeing ipv6_pinfo.pktoptions from sk->destroy()
to sk->sk_destruct(), so sk->sk_forward_alloc is no longer zero in
inet_csk_destroy_sock().

The same check has been in inet_sock_destruct() from at least v2.6,
we can just remove the WARN_ON_ONCE().  However, among the users of
sk_stream_kill_queues(), only CAIF is not calling inet_sock_destruct().
Thus, we add the same WARN_ON_ONCE() to caif_sock_destructor().

[0]: https://lore.kernel.org/netdev/39725AB4-88F1-41B3-B07F-949C5CAEFF4F@icloud.com/
[1]: multipath-tcp/mptcp_net-next#341
[2]:
WARNING: CPU: 0 PID: 3232 at net/core/stream.c:212 sk_stream_kill_queues+0x2f9/0x3e0
Modules linked in:
CPU: 0 PID: 3232 Comm: syz-executor.0 Not tainted 6.2.0-rc5ab24eb4698afbe147b424149c529e2a43ec24eb5 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:sk_stream_kill_queues+0x2f9/0x3e0
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ec 00 00 00 8b ab 08 01 00 00 e9 60 ff ff ff e8 d0 5f b6 fe 0f 0b eb 97 e8 c7 5f b6 fe <0f> 0b eb a0 e8 be 5f b6 fe 0f 0b e9 6a fe ff ff e8 02 07 e3 fe e9
RSP: 0018:ffff88810570fc68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888101f38f40 RSI: ffffffff8285e529 RDI: 0000000000000005
RBP: 0000000000000ce0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000ce0 R11: 0000000000000001 R12: ffff8881009e9488
R13: ffffffff84af2cc0 R14: 0000000000000000 R15: ffff8881009e9458
FS:  00007f7fdfbd5800(0000) GS:ffff88811b600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32923000 CR3: 00000001062fc006 CR4: 0000000000170ef0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x1a1/0x320
 __tcp_close+0xab6/0xe90
 tcp_close+0x30/0xc0
 inet_release+0xe9/0x1f0
 inet6_release+0x4c/0x70
 __sock_release+0xd2/0x280
 sock_close+0x15/0x20
 __fput+0x252/0xa20
 task_work_run+0x169/0x250
 exit_to_user_mode_prepare+0x113/0x120
 syscall_exit_to_user_mode+0x1d/0x40
 do_syscall_64+0x48/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f7fdf7ae28d
Code: c1 20 00 00 75 10 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 37 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00000000007dfbb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7fdf7ae28d
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 0000000000000003
RBP: 0000000000000000 R08: 000000007f338e0f R09: 0000000000000e0f
R10: 000000007f338e13 R11: 0000000000000293 R12: 00007f7fdefff000
R13: 00007f7fdefffcd8 R14: 00007f7fdefffce0 R15: 00007f7fdefffcd8
 </TASK>

[3]: https://lore.kernel.org/netdev/20230208004245.83497-1-kuniyu@amazon.com/

Fixes: b5fc292 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Christoph Paasch <christophpaasch@icloud.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
…eues().

commit 62ec33b upstream.

Christoph Paasch reported that commit b5fc292 ("inet6: Remove
inet6_destroy_sock() in sk->sk_prot->destroy().") started triggering
WARN_ON_ONCE(sk->sk_forward_alloc) in sk_stream_kill_queues().  [0 - 2]
Also, we can reproduce it by a program in [3].

In the commit, we delay freeing ipv6_pinfo.pktoptions from sk->destroy()
to sk->sk_destruct(), so sk->sk_forward_alloc is no longer zero in
inet_csk_destroy_sock().

The same check has been in inet_sock_destruct() from at least v2.6,
we can just remove the WARN_ON_ONCE().  However, among the users of
sk_stream_kill_queues(), only CAIF is not calling inet_sock_destruct().
Thus, we add the same WARN_ON_ONCE() to caif_sock_destructor().

[0]: https://lore.kernel.org/netdev/39725AB4-88F1-41B3-B07F-949C5CAEFF4F@icloud.com/
[1]: multipath-tcp/mptcp_net-next#341
[2]:
WARNING: CPU: 0 PID: 3232 at net/core/stream.c:212 sk_stream_kill_queues+0x2f9/0x3e0
Modules linked in:
CPU: 0 PID: 3232 Comm: syz-executor.0 Not tainted 6.2.0-rc5ab24eb4698afbe147b424149c529e2a43ec24eb5 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:sk_stream_kill_queues+0x2f9/0x3e0
Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ec 00 00 00 8b ab 08 01 00 00 e9 60 ff ff ff e8 d0 5f b6 fe 0f 0b eb 97 e8 c7 5f b6 fe <0f> 0b eb a0 e8 be 5f b6 fe 0f 0b e9 6a fe ff ff e8 02 07 e3 fe e9
RSP: 0018:ffff88810570fc68 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888101f38f40 RSI: ffffffff8285e529 RDI: 0000000000000005
RBP: 0000000000000ce0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000ce0 R11: 0000000000000001 R12: ffff8881009e9488
R13: ffffffff84af2cc0 R14: 0000000000000000 R15: ffff8881009e9458
FS:  00007f7fdfbd5800(0000) GS:ffff88811b600000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32923000 CR3: 00000001062fc006 CR4: 0000000000170ef0
Call Trace:
 <TASK>
 inet_csk_destroy_sock+0x1a1/0x320
 __tcp_close+0xab6/0xe90
 tcp_close+0x30/0xc0
 inet_release+0xe9/0x1f0
 inet6_release+0x4c/0x70
 __sock_release+0xd2/0x280
 sock_close+0x15/0x20
 __fput+0x252/0xa20
 task_work_run+0x169/0x250
 exit_to_user_mode_prepare+0x113/0x120
 syscall_exit_to_user_mode+0x1d/0x40
 do_syscall_64+0x48/0x90
 entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f7fdf7ae28d
Code: c1 20 00 00 75 10 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 37 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01
RSP: 002b:00000000007dfbb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7fdf7ae28d
RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 0000000000000003
RBP: 0000000000000000 R08: 000000007f338e0f R09: 0000000000000e0f
R10: 000000007f338e13 R11: 0000000000000293 R12: 00007f7fdefff000
R13: 00007f7fdefffcd8 R14: 00007f7fdefffce0 R15: 00007f7fdefffcd8
 </TASK>

[3]: https://lore.kernel.org/netdev/20230208004245.83497-1-kuniyu@amazon.com/

Fixes: b5fc292 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Christoph Paasch <christophpaasch@icloud.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
[ Upstream commit e40b801 ]

There is a certain chance to trigger the following panic:

PID: 5900   TASK: ffff88c1c8af4100  CPU: 1   COMMAND: "kworker/1:48"
 #0 [ffff9456c1cc79a0] machine_kexec at ffffffff870665b7
 #1 [ffff9456c1cc79f0] __crash_kexec at ffffffff871b4c7a
 #2 [ffff9456c1cc7ab0] crash_kexec at ffffffff871b5b60
 #3 [ffff9456c1cc7ac0] oops_end at ffffffff87026ce7
 #4 [ffff9456c1cc7ae0] page_fault_oops at ffffffff87075715
 #5 [ffff9456c1cc7b58] exc_page_fault at ffffffff87ad0654
 #6 [ffff9456c1cc7b80] asm_exc_page_fault at ffffffff87c00b62
    [exception RIP: ib_alloc_mr+19]
    RIP: ffffffffc0c9cce3  RSP: ffff9456c1cc7c38  RFLAGS: 00010202
    RAX: 0000000000000000  RBX: 0000000000000002  RCX: 0000000000000004
    RDX: 0000000000000010  RSI: 0000000000000000  RDI: 0000000000000000
    RBP: ffff88c1ea281d00   R8: 000000020a34ffff   R9: ffff88c1350bbb20
    R10: 0000000000000000  R11: 0000000000000001  R12: 0000000000000000
    R13: 0000000000000010  R14: ffff88c1ab040a50  R15: ffff88c1ea281d00
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff9456c1cc7c60] smc_ib_get_memory_region at ffffffffc0aff6df [smc]
 #8 [ffff9456c1cc7c88] smcr_buf_map_link at ffffffffc0b0278c [smc]
 #9 [ffff9456c1cc7ce0] __smc_buf_create at ffffffffc0b03586 [smc]

The reason here is that when the server tries to create a second link,
smc_llc_srv_add_link() has no protection and may add a new link to
link group. This breaks the security environment protected by
llc_conf_mutex.

Fixes: 2d2209f ("net/smc: first part of add link processing as SMC server")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
[ Upstream commit 3a70e0d ]

When doing timestamping in lan966x and having PROVE_LOCKING
enabled the following warning is shown.

========================================================
WARNING: possible irq lock inversion dependency detected
6.2.0-rc7-01749-gc54e1f7f7e36 #2786 Tainted: G                 N
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
c2609f5 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x16c/0x2e8
but this lock took another, SOFTIRQ-unsafe lock in the past:
 (&lan966x->ptp_ts_id_lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&lan966x->ptp_ts_id_lock);
                               local_irq_disable();
                               lock(_xmit_ETHER#2);
                               lock(&lan966x->ptp_ts_id_lock);
  <Interrupt>
    lock(_xmit_ETHER#2);

 *** DEADLOCK ***

5 locks held by swapper/0/0:
 #0: c1001e18 ((&ndev->rs_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x33c
 #1: c105e7c4 (rcu_read_lock){....}-{1:2}, at: ndisc_send_skb+0x134/0x81c
 #2: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x17c/0xc64
 #3: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x4c/0x1224
 #4: c3056174 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x354/0x1224

the shortest dependencies between 2nd lock and 1st lock:
 -> (&lan966x->ptp_ts_id_lock){+.+.}-{2:2} {
    HARDIRQ-ON-W at:
                      lock_acquire.part.0+0xb0/0x248
                      _raw_spin_lock+0x38/0x48
                      lan966x_ptp_irq_handler+0x164/0x2a8
                      irq_thread_fn+0x1c/0x78
                      irq_thread+0x130/0x278
                      kthread+0xec/0x110
                      ret_from_fork+0x14/0x28
    SOFTIRQ-ON-W at:
                      lock_acquire.part.0+0xb0/0x248
                      _raw_spin_lock+0x38/0x48
                      lan966x_ptp_irq_handler+0x164/0x2a8
                      irq_thread_fn+0x1c/0x78
                      irq_thread+0x130/0x278
                      kthread+0xec/0x110
                      ret_from_fork+0x14/0x28
    INITIAL USE at:
                     lock_acquire.part.0+0xb0/0x248
                     _raw_spin_lock_irqsave+0x4c/0x68
                     lan966x_ptp_txtstamp_request+0x128/0x1cc
                     lan966x_port_xmit+0x224/0x43c
                     dev_hard_start_xmit+0xa8/0x2f0
                     sch_direct_xmit+0x108/0x2e8
                     __dev_queue_xmit+0x41c/0x1224
                     packet_sendmsg+0xdb4/0x134c
                     __sys_sendto+0xd0/0x154
                     sys_send+0x18/0x20
                     ret_fast_syscall+0x0/0x1c
  }
  ... key      at: [<c174ba0c>] __key.2+0x0/0x8
  ... acquired at:
   _raw_spin_lock_irqsave+0x4c/0x68
   lan966x_ptp_txtstamp_request+0x128/0x1cc
   lan966x_port_xmit+0x224/0x43c
   dev_hard_start_xmit+0xa8/0x2f0
   sch_direct_xmit+0x108/0x2e8
   __dev_queue_xmit+0x41c/0x1224
   packet_sendmsg+0xdb4/0x134c
   __sys_sendto+0xd0/0x154
   sys_send+0x18/0x20
   ret_fast_syscall+0x0/0x1c

-> (_xmit_ETHER#2){+.-.}-{2:2} {
   HARDIRQ-ON-W at:
                    lock_acquire.part.0+0xb0/0x248
                    _raw_spin_lock+0x38/0x48
                    netif_freeze_queues+0x38/0x68
                    dev_deactivate_many+0xac/0x388
                    dev_deactivate+0x38/0x6c
                    linkwatch_do_dev+0x70/0x8c
                    __linkwatch_run_queue+0xd4/0x1e8
                    linkwatch_event+0x24/0x34
                    process_one_work+0x284/0x744
                    worker_thread+0x28/0x4bc
                    kthread+0xec/0x110
                    ret_from_fork+0x14/0x28
   IN-SOFTIRQ-W at:
                    lock_acquire.part.0+0xb0/0x248
                    _raw_spin_lock+0x38/0x48
                    sch_direct_xmit+0x16c/0x2e8
                    __dev_queue_xmit+0x41c/0x1224
                    ip6_finish_output2+0x5f4/0xc64
                    ndisc_send_skb+0x4cc/0x81c
                    addrconf_rs_timer+0xb0/0x2f8
                    call_timer_fn+0xb4/0x33c
                    expire_timers+0xb4/0x10c
                    run_timer_softirq+0xf8/0x2a8
                    __do_softirq+0xd4/0x5fc
                    __irq_exit_rcu+0x138/0x17c
                    irq_exit+0x8/0x28
                    __irq_svc+0x90/0xbc
                    arch_cpu_idle+0x30/0x3c
                    default_idle_call+0x44/0xac
                    do_idle+0xc8/0x138
                    cpu_startup_entry+0x18/0x1c
                    rest_init+0xcc/0x168
                    arch_post_acpi_subsys_init+0x0/0x8
   INITIAL USE at:
                   lock_acquire.part.0+0xb0/0x248
                   _raw_spin_lock+0x38/0x48
                   netif_freeze_queues+0x38/0x68
                   dev_deactivate_many+0xac/0x388
                   dev_deactivate+0x38/0x6c
                   linkwatch_do_dev+0x70/0x8c
                   __linkwatch_run_queue+0xd4/0x1e8
                   linkwatch_event+0x24/0x34
                   process_one_work+0x284/0x744
                   worker_thread+0x28/0x4bc
                   kthread+0xec/0x110
                   ret_from_fork+0x14/0x28
 }
 ... key      at: [<c175974c>] netdev_xmit_lock_key+0x8/0x1c8
 ... acquired at:
   __lock_acquire+0x978/0x2978
   lock_acquire.part.0+0xb0/0x248
   _raw_spin_lock+0x38/0x48
   sch_direct_xmit+0x16c/0x2e8
   __dev_queue_xmit+0x41c/0x1224
   ip6_finish_output2+0x5f4/0xc64
   ndisc_send_skb+0x4cc/0x81c
   addrconf_rs_timer+0xb0/0x2f8
   call_timer_fn+0xb4/0x33c
   expire_timers+0xb4/0x10c
   run_timer_softirq+0xf8/0x2a8
   __do_softirq+0xd4/0x5fc
   __irq_exit_rcu+0x138/0x17c
   irq_exit+0x8/0x28
   __irq_svc+0x90/0xbc
   arch_cpu_idle+0x30/0x3c
   default_idle_call+0x44/0xac
   do_idle+0xc8/0x138
   cpu_startup_entry+0x18/0x1c
   rest_init+0xcc/0x168
   arch_post_acpi_subsys_init+0x0/0x8

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G                 N 6.2.0-rc7-01749-gc54e1f7f7e36 #2786
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x58/0x70
 dump_stack_lvl from mark_lock.part.0+0x59c/0x93c
 mark_lock.part.0 from __lock_acquire+0x978/0x2978
 __lock_acquire from lock_acquire.part.0+0xb0/0x248
 lock_acquire.part.0 from _raw_spin_lock+0x38/0x48
 _raw_spin_lock from sch_direct_xmit+0x16c/0x2e8
 sch_direct_xmit from __dev_queue_xmit+0x41c/0x1224
 __dev_queue_xmit from ip6_finish_output2+0x5f4/0xc64
 ip6_finish_output2 from ndisc_send_skb+0x4cc/0x81c
 ndisc_send_skb from addrconf_rs_timer+0xb0/0x2f8
 addrconf_rs_timer from call_timer_fn+0xb4/0x33c
 call_timer_fn from expire_timers+0xb4/0x10c
 expire_timers from run_timer_softirq+0xf8/0x2a8
 run_timer_softirq from __do_softirq+0xd4/0x5fc
 __do_softirq from __irq_exit_rcu+0x138/0x17c
 __irq_exit_rcu from irq_exit+0x8/0x28
 irq_exit from __irq_svc+0x90/0xbc
Exception stack(0xc1001f20 to 0xc1001f68)
1f20: ffffffff ffffffff 00000001 c011f840 c100e000 c100e000 c1009314 c1009370
1f40: c10f0c1a c0d5e564 c0f5da8c 00000000 00000000 c1001f70 c010f0bc c010f0c0
1f60: 600f0013 ffffffff
 __irq_svc from arch_cpu_idle+0x30/0x3c
 arch_cpu_idle from default_idle_call+0x44/0xac
 default_idle_call from do_idle+0xc8/0x138
 do_idle from cpu_startup_entry+0x18/0x1c
 cpu_startup_entry from rest_init+0xcc/0x168
 rest_init from arch_post_acpi_subsys_init+0x0/0x8

Fix this by using spin_lock_irqsave/spin_lock_irqrestore also
inside lan966x_ptp_irq_handler.

Fixes: e85a96e ("net: lan966x: Add support for ptp interrupts")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230217210917.2649365-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
[ Upstream commit 91621be ]

When --overwrite and --max-size options of perf record are used
together, a segmentation fault occurs. The following is an example:

  # perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1
  [ perf record: Woken up 1 times to write data ]
  perf: Segmentation fault
  Obtained 12 stack frames.
  ./perf/perf(+0x197673) [0x55f99710b673]
  /lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f]
  ./perf/perf(+0x8eb40) [0x55f997002b40]
  ./perf/perf(+0x1f6882) [0x55f99716a882]
  ./perf/perf(+0x794c2) [0x55f996fed4c2]
  ./perf/perf(+0x7b7c7) [0x55f996fef7c7]
  ./perf/perf(+0x9074b) [0x55f99700474b]
  ./perf/perf(+0x12e23c) [0x55f9970a223c]
  ./perf/perf(+0x12e54a) [0x55f9970a254a]
  ./perf/perf(+0x7db60) [0x55f996ff1b60]
  /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86]
  ./perf/perf(+0x7dfe9) [0x55f996ff1fe9]
  Segmentation fault (core dumped)

backtrace of the core file is as follows:

  (gdb) bt
  #0  record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234
  #1  record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242
  #2  record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263
  #3  process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618
  #4  0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658,
      from=from@entry=0) at util/synthetic-events.c:1895
  #5  0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658)
      at util/synthetic-events.c:1905
  #6  0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997
  #7  0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802
  #8  0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258
  #9  0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330
  #10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384
  #11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428
  #12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562

The reason is that record__bytes_written accesses the freed memory rec->thread_data,
The process is as follows:
  __cmd_record
    -> record__free_thread_data
      -> zfree(&rec->thread_data)         // free rec->thread_data
    -> record__synthesize
      -> perf_event__synthesize_id_index
        -> process_synthesized_event
          -> record__write
            -> record__bytes_written      // access rec->thread_data

We add a member variable "thread_bytes_written" in the struct "record"
to save the data size written by the threads.

Fixes: 6d57581 ("perf record: Add support for limit perf output file size")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
…dler

commit 42e19e6 upstream.

Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last  enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last  enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G                 N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
 [<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
 [<00000003e3d02e82>] __might_resched+0x60a/0x668
 [<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
 [<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
 [<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
 [<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
 [<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
 [<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
 [<00000003e3ce30f8>] kthread+0x2d0/0x398
 [<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
 [<00000003e60ccada>] ret_from_fork+0xa/0x40

The reason for this error report is that kprobes handling code failed
to restore irqs.

The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep  <- original kprobe (saves kprobe_saved_imask)
enable_singlestep  <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)

There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.

Cc: stable@vger.kernel.org
Fixes: 4ba069b ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
commit 60eed1e upstream.

code path:

ocfs2_ioctl_move_extents
 ocfs2_move_extents
  ocfs2_defrag_extent
   __ocfs2_move_extent
    + ocfs2_journal_access_di
    + ocfs2_split_extent  //sub-paths call jbd2_journal_restart
    + ocfs2_journal_dirty //crash by jbs2 ASSERT

crash stacks:

PID: 11297  TASK: ffff974a676dcd00  CPU: 67  COMMAND: "defragfs.ocfs2"
 #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
 #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
 #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
 #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
    [exception RIP: jbd2_journal_dirty_metadata+0x2ba]
    RIP: ffffffffc09ca54a  RSP: ffffb25d8dad3b70  RFLAGS: 00010207
    RAX: 0000000000000000  RBX: ffff9706eedc5248  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: ffff97337029ea28  RDI: ffff9706eedc5250
    RBP: ffff9703c3520200   R8: 000000000f46b0b2   R9: 0000000000000000
    R10: 0000000000000001  R11: 00000001000000fe  R12: ffff97337029ea28
    R13: 0000000000000000  R14: ffff9703de59bf60  R15: ffff9706eedc5250
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
 #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
 #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]

Analysis

This bug has the same root cause of 'commit 7f27ec9 ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'.  For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.

How to fix

For ocfs2_split_extent() can handle journal operations totally by itself.
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair.  The fix method is to remove
journal access/dirty from __ocfs2_move_extent().

The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html

Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
[ Upstream commit e9e4229 ]

The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action pedit ... index 1
tc filter add ... action pedit index 1

In the current code for act_pedit this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.

tdc results:
1..69
ok 1 319a - Add pedit action that mangles IP TTL
ok 2 7e67 - Replace pedit action with invalid goto chain
ok 3 377e - Add pedit action with RAW_OP offset u32
ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID)
ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16
ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID)
ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value
ok 8 2893 - Add pedit action with RAW_OP offset u8 quad
ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8
ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8
ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert
ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID)
ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set
ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value
ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value
ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value
ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value
ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value
ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value
ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value
ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value
ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value
ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value
ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value
ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src
ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst
ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst
ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID)
ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID)
ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence
ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID)
ok 32 ab06 - Add pedit action with LAYERED_OP eth add type
ok 33 918d - Add pedit action with LAYERED_OP eth invert src
ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst
ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type
ok 36 7588 - Add pedit action with LAYERED_OP ip set src
ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst
ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst
ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield
ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol
ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID)
ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set
ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields
ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields
ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos
ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence
ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos
ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence
ok 49 438e - Add pedit action with LAYERED_OP ip clear tos
ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence
ok 51 824a - Add pedit action with LAYERED_OP ip invert tos
ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence
ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport
ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code
ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID)
ok 56 815c - Add pedit action with LAYERED_OP ip6 set src
ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst
ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst
ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)
ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class
ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl
ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit
ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport
ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID)
ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set
ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields
ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport
ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1
ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2

Fixes: 71d0ed7 ("net/act_pedit: Support using offset relative to the conventional network headers")
Fixes: f67169f ("net/sched: act_pedit: fix WARN() in the traffic path")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
[ Upstream commit 3dca1f8 ]

Don't hold sdw_dev_lock while calling the peripheral driver
probe() and remove() callbacks.

Holding sdw_dev_lock around the probe() and remove() calls causes
a theoretical mutex inversion which lockdep will assert on.

During probe() the sdw_dev_lock mutex is taken first and then
ASoC/ALSA locks are taken by the probe() implementation.

During normal operation ASoC can take its locks and then trigger
a runtime resume of the component. The SoundWire resume will then
take sdw_dev_lock. This is the reverse order compared to probe().

It's not necessary to hold sdw_dev_lock when calling the probe()
and remove(), it is only used to prevent the bus core calling the
driver callbacks if there isn't a driver or the driver is removing.

All calls to the driver callbacks are guarded by the 'probed' flag.
So if sdw_dev_lock is held while setting and clearing the 'probed'
flag this is sufficient to guarantee the safety of callback
functions.

Removing the mutex from around the call to probe() means that it
is now possible for a bus event (PING response) to be handled in
parallel with the probe(). But sdw_bus_probe() already has
handling for this by calling the device update_status() after
the probe() has completed.

Example lockdep assert:
[   46.098514] ======================================================
[   46.104736] WARNING: possible circular locking dependency detected
[   46.110961] 6.1.0-rc4-jamerson #1 Tainted: G            E
[   46.116842] ------------------------------------------------------
[   46.123063] mpg123/1130 is trying to acquire lock:
[   46.127883] ffff8b445031fb80 (&slave->sdw_dev_lock){+.+.}-{3:3}, at: sdw_update_slave_status+0x26/0x70
[   46.137225]
               but task is already holding lock:
[   46.143074] ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830
[   46.151536]
               which lock already depends on the new lock.[   46.159732]
               the existing dependency chain (in reverse order) is:
[   46.167231]
               -> #4 (&card->pcm_mutex){+.+.}-{3:3}:
[   46.173428]        __mutex_lock+0x94/0x920
[   46.177542]        snd_soc_dpcm_runtime_update+0x2e/0x100
[   46.182958]        snd_soc_dapm_put_enum_double+0x1c2/0x200
[   46.188548]        snd_ctl_elem_write+0x10c/0x1d0
[   46.193268]        snd_ctl_ioctl+0x126/0x850
[   46.197556]        __x64_sys_ioctl+0x87/0xc0
[   46.201845]        do_syscall_64+0x38/0x90
[   46.205959]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.211553]
               -> #3 (&card->controls_rwsem){++++}-{3:3}:
[   46.218188]        down_write+0x2b/0xd0
[   46.222038]        snd_ctl_add_replace+0x39/0xb0
[   46.226672]        snd_soc_add_controls+0x53/0x80
[   46.231393]        soc_probe_component+0x1e4/0x2a0
[   46.236202]        snd_soc_bind_card+0x51a/0xc80
[   46.240836]        devm_snd_soc_register_card+0x43/0x90
[   46.246079]        mc_probe+0x982/0xfe0 [snd_soc_sof_sdw]
[   46.251500]        platform_probe+0x3c/0xa0
[   46.255700]        really_probe+0xde/0x390
[   46.259814]        __driver_probe_device+0x78/0x180
[   46.264710]        driver_probe_device+0x1e/0x90
[   46.269347]        __driver_attach+0x9f/0x1f0
[   46.273721]        bus_for_each_dev+0x78/0xc0
[   46.278098]        bus_add_driver+0x1ac/0x200
[   46.282473]        driver_register+0x8f/0xf0
[   46.286759]        do_one_initcall+0x58/0x310
[   46.291136]        do_init_module+0x4c/0x1f0
[   46.295422]        __do_sys_finit_module+0xb4/0x130
[   46.300321]        do_syscall_64+0x38/0x90
[   46.304434]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.310027]
               -> #2 (&card->mutex){+.+.}-{3:3}:
[   46.315883]        __mutex_lock+0x94/0x920
[   46.320000]        snd_soc_bind_card+0x3e/0xc80
[   46.324551]        devm_snd_soc_register_card+0x43/0x90
[   46.329798]        mc_probe+0x982/0xfe0 [snd_soc_sof_sdw]
[   46.335219]        platform_probe+0x3c/0xa0
[   46.339420]        really_probe+0xde/0x390
[   46.343532]        __driver_probe_device+0x78/0x180
[   46.348430]        driver_probe_device+0x1e/0x90
[   46.353065]        __driver_attach+0x9f/0x1f0
[   46.357437]        bus_for_each_dev+0x78/0xc0
[   46.361812]        bus_add_driver+0x1ac/0x200
[   46.366716]        driver_register+0x8f/0xf0
[   46.371528]        do_one_initcall+0x58/0x310
[   46.376424]        do_init_module+0x4c/0x1f0
[   46.381239]        __do_sys_finit_module+0xb4/0x130
[   46.386665]        do_syscall_64+0x38/0x90
[   46.391299]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.397416]
               -> #1 (client_mutex){+.+.}-{3:3}:
[   46.404307]        __mutex_lock+0x94/0x920
[   46.408941]        snd_soc_add_component+0x24/0x2c0
[   46.414345]        devm_snd_soc_register_component+0x54/0xa0
[   46.420522]        cs35l56_common_probe+0x280/0x370 [snd_soc_cs35l56]
[   46.427487]        cs35l56_sdw_probe+0xf4/0x170 [snd_soc_cs35l56_sdw]
[   46.434442]        sdw_drv_probe+0x80/0x1a0
[   46.439136]        really_probe+0xde/0x390
[   46.443738]        __driver_probe_device+0x78/0x180
[   46.449120]        driver_probe_device+0x1e/0x90
[   46.454247]        __driver_attach+0x9f/0x1f0
[   46.459106]        bus_for_each_dev+0x78/0xc0
[   46.463971]        bus_add_driver+0x1ac/0x200
[   46.468825]        driver_register+0x8f/0xf0
[   46.473592]        do_one_initcall+0x58/0x310
[   46.478441]        do_init_module+0x4c/0x1f0
[   46.483202]        __do_sys_finit_module+0xb4/0x130
[   46.488572]        do_syscall_64+0x38/0x90
[   46.493158]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.499229]
               -> #0 (&slave->sdw_dev_lock){+.+.}-{3:3}:
[   46.506737]        __lock_acquire+0x1121/0x1df0
[   46.511765]        lock_acquire+0xd5/0x300
[   46.516360]        __mutex_lock+0x94/0x920
[   46.520949]        sdw_update_slave_status+0x26/0x70
[   46.526409]        sdw_clear_slave_status+0xd8/0xe0
[   46.531783]        intel_resume_runtime+0x139/0x2a0
[   46.537155]        __rpm_callback+0x41/0x120
[   46.541919]        rpm_callback+0x5d/0x70
[   46.546422]        rpm_resume+0x531/0x7e0
[   46.550920]        __pm_runtime_resume+0x4a/0x80
[   46.556024]        snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0
[   46.562611]        __soc_pcm_open+0x62/0x520
[   46.567375]        dpcm_be_dai_startup+0x116/0x210
[   46.572661]        dpcm_fe_dai_open+0xf7/0x830
[   46.577597]        snd_pcm_open_substream+0x54a/0x8b0
[   46.583145]        snd_pcm_open.part.0+0xdc/0x200
[   46.588341]        snd_pcm_playback_open+0x51/0x80
[   46.593625]        chrdev_open+0xc0/0x250
[   46.598129]        do_dentry_open+0x15f/0x430
[   46.602981]        path_openat+0x75e/0xa80
[   46.607575]        do_filp_open+0xb2/0x160
[   46.612162]        do_sys_openat2+0x9a/0x160
[   46.616922]        __x64_sys_openat+0x53/0xa0
[   46.621767]        do_syscall_64+0x38/0x90
[   46.626352]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.632414]
               other info that might help us debug this:[   46.641862] Chain exists of:
                 &slave->sdw_dev_lock --> &card->controls_rwsem --> &card->pcm_mutex[   46.655145]  Possible unsafe locking scenario:[   46.662048]        CPU0                    CPU1
[   46.667080]        ----                    ----
[   46.672108]   lock(&card->pcm_mutex);
[   46.676267]                                lock(&card->controls_rwsem);
[   46.683382]                                lock(&card->pcm_mutex);
[   46.690063]   lock(&slave->sdw_dev_lock);
[   46.694574]
                *** DEADLOCK ***[   46.701942] 2 locks held by mpg123/1130:
[   46.706356]  #0: ffff8b4457b22b90 (&pcm->open_mutex){+.+.}-{3:3}, at: snd_pcm_open.part.0+0xc9/0x200
[   46.715999]  #1: ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830
[   46.725390]
               stack backtrace:
[   46.730752] CPU: 0 PID: 1130 Comm: mpg123 Tainted: G            E      6.1.0-rc4-jamerson #1
[   46.739703] Hardware name: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020
[   46.747270] Call Trace:
[   46.750239]  <TASK>
[   46.752857]  dump_stack_lvl+0x56/0x73
[   46.757045]  check_noncircular+0x102/0x120
[   46.761664]  __lock_acquire+0x1121/0x1df0
[   46.766197]  lock_acquire+0xd5/0x300
[   46.770292]  ? sdw_update_slave_status+0x26/0x70
[   46.775432]  ? lock_is_held_type+0xe2/0x140
[   46.780143]  __mutex_lock+0x94/0x920
[   46.784241]  ? sdw_update_slave_status+0x26/0x70
[   46.789387]  ? find_held_lock+0x2b/0x80
[   46.793750]  ? sdw_update_slave_status+0x26/0x70
[   46.798894]  ? lock_release+0x147/0x2f0
[   46.803262]  ? lockdep_init_map_type+0x47/0x250
[   46.808315]  ? sdw_update_slave_status+0x26/0x70
[   46.813456]  sdw_update_slave_status+0x26/0x70
[   46.818422]  sdw_clear_slave_status+0xd8/0xe0
[   46.823302]  ? pm_generic_runtime_suspend+0x30/0x30
[   46.828706]  intel_resume_runtime+0x139/0x2a0
[   46.833583]  ? _raw_spin_unlock_irq+0x24/0x50
[   46.838462]  ? pm_generic_runtime_suspend+0x30/0x30
[   46.843866]  __rpm_callback+0x41/0x120
[   46.848142]  ? pm_generic_runtime_suspend+0x30/0x30
[   46.853550]  rpm_callback+0x5d/0x70
[   46.857568]  rpm_resume+0x531/0x7e0
[   46.861578]  ? _raw_spin_lock_irqsave+0x62/0x70
[   46.866634]  __pm_runtime_resume+0x4a/0x80
[   46.871258]  snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0
[   46.877358]  __soc_pcm_open+0x62/0x520
[   46.881634]  ? dpcm_add_paths.isra.0+0x35d/0x4c0
[   46.886784]  dpcm_be_dai_startup+0x116/0x210
[   46.891592]  dpcm_fe_dai_open+0xf7/0x830
[   46.896046]  ? debug_mutex_init+0x33/0x50
[   46.900591]  snd_pcm_open_substream+0x54a/0x8b0
[   46.905658]  snd_pcm_open.part.0+0xdc/0x200
[   46.910376]  ? wake_up_q+0x90/0x90
[   46.914312]  snd_pcm_playback_open+0x51/0x80
[   46.919118]  chrdev_open+0xc0/0x250
[   46.923147]  ? cdev_device_add+0x90/0x90
[   46.927608]  do_dentry_open+0x15f/0x430
[   46.931976]  path_openat+0x75e/0xa80
[   46.936086]  do_filp_open+0xb2/0x160
[   46.940194]  ? lock_release+0x147/0x2f0
[   46.944563]  ? _raw_spin_unlock+0x29/0x50
[   46.949101]  do_sys_openat2+0x9a/0x160
[   46.953377]  __x64_sys_openat+0x53/0xa0
[   46.957733]  do_syscall_64+0x38/0x90
[   46.961829]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.967402] RIP: 0033:0x7fa6397ccd3b
[   46.971506] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
[   46.991413] RSP: 002b:00007fff838e8990 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[   46.999580] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007fa6397ccd3b
[   47.007311] RDX: 0000000000080802 RSI: 00007fff838e8b50 RDI: 00000000ffffff9c
[   47.015047] RBP: 00007fff838e8b50 R08: 0000000000000000 R09: 0000000000000011
[   47.022787] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802
[   47.030539] R13: 0000000000000004 R14: 0000000000000000 R15: 00007fff838e8b50
[   47.038289]  </TASK>

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230123172520.339367-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 14, 2023
commit 0e68b55 upstream.

Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs
the following:
  BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0
  preempt_count: 2, expected: 0
  RCU nest depth: 0, expected: 0
  3 locks held by kworker/u320:0/9:
  #0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
  #1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
  #2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
  Preemption disabled at:
  efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248)
  CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G        W          6.2.0-rc3-rt1
  Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
  Workqueue: efi_rts_wq efi_call_rts
  Call trace:
  dump_backtrace (arch/arm64/kernel/stacktrace.c:158)
  show_stack (arch/arm64/kernel/stacktrace.c:165)
  dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
  dump_stack (lib/dump_stack.c:114)
  __might_resched (kernel/sched/core.c:10134)
  rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4))
  efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
  [...]

This seems to come from commit ff7a167 ("arm64: efi: Execute
runtime services from a dedicated stack") which adds a spinlock. This
spinlock is taken through:
efi_call_rts()
\-efi_call_virt()
  \-efi_call_virt_pointer()
    \-arch_efi_call_virt_setup()

Make 'efi_rt_lock' a raw_spinlock to avoid being preempted.

[ardb: The EFI runtime services are called with a different set of
       translation tables, and are permitted to use the SIMD registers.
       The context switch code preserves/restores neither, and so EFI
       calls must be made with preemption disabled, rather than only
       disabling migration.]

Fixes: ff7a167 ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Mar 15, 2023
[ Upstream commit e40b801 ]

There is a certain chance to trigger the following panic:

PID: 5900   TASK: ffff88c1c8af4100  CPU: 1   COMMAND: "kworker/1:48"
 #0 [ffff9456c1cc79a0] machine_kexec at ffffffff870665b7
 #1 [ffff9456c1cc79f0] __crash_kexec at ffffffff871b4c7a
 #2 [ffff9456c1cc7ab0] crash_kexec at ffffffff871b5b60
 #3 [ffff9456c1cc7ac0] oops_end at ffffffff87026ce7
 #4 [ffff9456c1cc7ae0] page_fault_oops at ffffffff87075715
 #5 [ffff9456c1cc7b58] exc_page_fault at ffffffff87ad0654
 #6 [ffff9456c1cc7b80] asm_exc_page_fault at ffffffff87c00b62
    [exception RIP: ib_alloc_mr+19]
    RIP: ffffffffc0c9cce3  RSP: ffff9456c1cc7c38  RFLAGS: 00010202
    RAX: 0000000000000000  RBX: 0000000000000002  RCX: 0000000000000004
    RDX: 0000000000000010  RSI: 0000000000000000  RDI: 0000000000000000
    RBP: ffff88c1ea281d00   R8: 000000020a34ffff   R9: ffff88c1350bbb20
    R10: 0000000000000000  R11: 0000000000000001  R12: 0000000000000000
    R13: 0000000000000010  R14: ffff88c1ab040a50  R15: ffff88c1ea281d00
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff9456c1cc7c60] smc_ib_get_memory_region at ffffffffc0aff6df [smc]
 #8 [ffff9456c1cc7c88] smcr_buf_map_link at ffffffffc0b0278c [smc]
 #9 [ffff9456c1cc7ce0] __smc_buf_create at ffffffffc0b03586 [smc]

The reason here is that when the server tries to create a second link,
smc_llc_srv_add_link() has no protection and may add a new link to
link group. This breaks the security environment protected by
llc_conf_mutex.

Fixes: 2d2209f ("net/smc: first part of add link processing as SMC server")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 15, 2023
[ Upstream commit 3a70e0d ]

When doing timestamping in lan966x and having PROVE_LOCKING
enabled the following warning is shown.

========================================================
WARNING: possible irq lock inversion dependency detected
6.2.0-rc7-01749-gc54e1f7f7e36 #2786 Tainted: G                 N
--------------------------------------------------------
swapper/0/0 just changed the state of lock:
c2609f5 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x16c/0x2e8
but this lock took another, SOFTIRQ-unsafe lock in the past:
 (&lan966x->ptp_ts_id_lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&lan966x->ptp_ts_id_lock);
                               local_irq_disable();
                               lock(_xmit_ETHER#2);
                               lock(&lan966x->ptp_ts_id_lock);
  <Interrupt>
    lock(_xmit_ETHER#2);

 *** DEADLOCK ***

5 locks held by swapper/0/0:
 #0: c1001e18 ((&ndev->rs_timer)){+.-.}-{0:0}, at: call_timer_fn+0x0/0x33c
 #1: c105e7c4 (rcu_read_lock){....}-{1:2}, at: ndisc_send_skb+0x134/0x81c
 #2: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: ip6_finish_output2+0x17c/0xc64
 #3: c105e7d8 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x4c/0x1224
 #4: c3056174 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x354/0x1224

the shortest dependencies between 2nd lock and 1st lock:
 -> (&lan966x->ptp_ts_id_lock){+.+.}-{2:2} {
    HARDIRQ-ON-W at:
                      lock_acquire.part.0+0xb0/0x248
                      _raw_spin_lock+0x38/0x48
                      lan966x_ptp_irq_handler+0x164/0x2a8
                      irq_thread_fn+0x1c/0x78
                      irq_thread+0x130/0x278
                      kthread+0xec/0x110
                      ret_from_fork+0x14/0x28
    SOFTIRQ-ON-W at:
                      lock_acquire.part.0+0xb0/0x248
                      _raw_spin_lock+0x38/0x48
                      lan966x_ptp_irq_handler+0x164/0x2a8
                      irq_thread_fn+0x1c/0x78
                      irq_thread+0x130/0x278
                      kthread+0xec/0x110
                      ret_from_fork+0x14/0x28
    INITIAL USE at:
                     lock_acquire.part.0+0xb0/0x248
                     _raw_spin_lock_irqsave+0x4c/0x68
                     lan966x_ptp_txtstamp_request+0x128/0x1cc
                     lan966x_port_xmit+0x224/0x43c
                     dev_hard_start_xmit+0xa8/0x2f0
                     sch_direct_xmit+0x108/0x2e8
                     __dev_queue_xmit+0x41c/0x1224
                     packet_sendmsg+0xdb4/0x134c
                     __sys_sendto+0xd0/0x154
                     sys_send+0x18/0x20
                     ret_fast_syscall+0x0/0x1c
  }
  ... key      at: [<c174ba0c>] __key.2+0x0/0x8
  ... acquired at:
   _raw_spin_lock_irqsave+0x4c/0x68
   lan966x_ptp_txtstamp_request+0x128/0x1cc
   lan966x_port_xmit+0x224/0x43c
   dev_hard_start_xmit+0xa8/0x2f0
   sch_direct_xmit+0x108/0x2e8
   __dev_queue_xmit+0x41c/0x1224
   packet_sendmsg+0xdb4/0x134c
   __sys_sendto+0xd0/0x154
   sys_send+0x18/0x20
   ret_fast_syscall+0x0/0x1c

-> (_xmit_ETHER#2){+.-.}-{2:2} {
   HARDIRQ-ON-W at:
                    lock_acquire.part.0+0xb0/0x248
                    _raw_spin_lock+0x38/0x48
                    netif_freeze_queues+0x38/0x68
                    dev_deactivate_many+0xac/0x388
                    dev_deactivate+0x38/0x6c
                    linkwatch_do_dev+0x70/0x8c
                    __linkwatch_run_queue+0xd4/0x1e8
                    linkwatch_event+0x24/0x34
                    process_one_work+0x284/0x744
                    worker_thread+0x28/0x4bc
                    kthread+0xec/0x110
                    ret_from_fork+0x14/0x28
   IN-SOFTIRQ-W at:
                    lock_acquire.part.0+0xb0/0x248
                    _raw_spin_lock+0x38/0x48
                    sch_direct_xmit+0x16c/0x2e8
                    __dev_queue_xmit+0x41c/0x1224
                    ip6_finish_output2+0x5f4/0xc64
                    ndisc_send_skb+0x4cc/0x81c
                    addrconf_rs_timer+0xb0/0x2f8
                    call_timer_fn+0xb4/0x33c
                    expire_timers+0xb4/0x10c
                    run_timer_softirq+0xf8/0x2a8
                    __do_softirq+0xd4/0x5fc
                    __irq_exit_rcu+0x138/0x17c
                    irq_exit+0x8/0x28
                    __irq_svc+0x90/0xbc
                    arch_cpu_idle+0x30/0x3c
                    default_idle_call+0x44/0xac
                    do_idle+0xc8/0x138
                    cpu_startup_entry+0x18/0x1c
                    rest_init+0xcc/0x168
                    arch_post_acpi_subsys_init+0x0/0x8
   INITIAL USE at:
                   lock_acquire.part.0+0xb0/0x248
                   _raw_spin_lock+0x38/0x48
                   netif_freeze_queues+0x38/0x68
                   dev_deactivate_many+0xac/0x388
                   dev_deactivate+0x38/0x6c
                   linkwatch_do_dev+0x70/0x8c
                   __linkwatch_run_queue+0xd4/0x1e8
                   linkwatch_event+0x24/0x34
                   process_one_work+0x284/0x744
                   worker_thread+0x28/0x4bc
                   kthread+0xec/0x110
                   ret_from_fork+0x14/0x28
 }
 ... key      at: [<c175974c>] netdev_xmit_lock_key+0x8/0x1c8
 ... acquired at:
   __lock_acquire+0x978/0x2978
   lock_acquire.part.0+0xb0/0x248
   _raw_spin_lock+0x38/0x48
   sch_direct_xmit+0x16c/0x2e8
   __dev_queue_xmit+0x41c/0x1224
   ip6_finish_output2+0x5f4/0xc64
   ndisc_send_skb+0x4cc/0x81c
   addrconf_rs_timer+0xb0/0x2f8
   call_timer_fn+0xb4/0x33c
   expire_timers+0xb4/0x10c
   run_timer_softirq+0xf8/0x2a8
   __do_softirq+0xd4/0x5fc
   __irq_exit_rcu+0x138/0x17c
   irq_exit+0x8/0x28
   __irq_svc+0x90/0xbc
   arch_cpu_idle+0x30/0x3c
   default_idle_call+0x44/0xac
   do_idle+0xc8/0x138
   cpu_startup_entry+0x18/0x1c
   rest_init+0xcc/0x168
   arch_post_acpi_subsys_init+0x0/0x8

stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G                 N 6.2.0-rc7-01749-gc54e1f7f7e36 #2786
Hardware name: Generic DT based system
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x58/0x70
 dump_stack_lvl from mark_lock.part.0+0x59c/0x93c
 mark_lock.part.0 from __lock_acquire+0x978/0x2978
 __lock_acquire from lock_acquire.part.0+0xb0/0x248
 lock_acquire.part.0 from _raw_spin_lock+0x38/0x48
 _raw_spin_lock from sch_direct_xmit+0x16c/0x2e8
 sch_direct_xmit from __dev_queue_xmit+0x41c/0x1224
 __dev_queue_xmit from ip6_finish_output2+0x5f4/0xc64
 ip6_finish_output2 from ndisc_send_skb+0x4cc/0x81c
 ndisc_send_skb from addrconf_rs_timer+0xb0/0x2f8
 addrconf_rs_timer from call_timer_fn+0xb4/0x33c
 call_timer_fn from expire_timers+0xb4/0x10c
 expire_timers from run_timer_softirq+0xf8/0x2a8
 run_timer_softirq from __do_softirq+0xd4/0x5fc
 __do_softirq from __irq_exit_rcu+0x138/0x17c
 __irq_exit_rcu from irq_exit+0x8/0x28
 irq_exit from __irq_svc+0x90/0xbc
Exception stack(0xc1001f20 to 0xc1001f68)
1f20: ffffffff ffffffff 00000001 c011f840 c100e000 c100e000 c1009314 c1009370
1f40: c10f0c1a c0d5e564 c0f5da8c 00000000 00000000 c1001f70 c010f0bc c010f0c0
1f60: 600f0013 ffffffff
 __irq_svc from arch_cpu_idle+0x30/0x3c
 arch_cpu_idle from default_idle_call+0x44/0xac
 default_idle_call from do_idle+0xc8/0x138
 do_idle from cpu_startup_entry+0x18/0x1c
 cpu_startup_entry from rest_init+0xcc/0x168
 rest_init from arch_post_acpi_subsys_init+0x0/0x8

Fix this by using spin_lock_irqsave/spin_lock_irqrestore also
inside lan966x_ptp_irq_handler.

Fixes: e85a96e ("net: lan966x: Add support for ptp interrupts")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20230217210917.2649365-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 15, 2023
[ Upstream commit 91621be ]

When --overwrite and --max-size options of perf record are used
together, a segmentation fault occurs. The following is an example:

  # perf record -e sched:sched* --overwrite --max-size 1K -a -- sleep 1
  [ perf record: Woken up 1 times to write data ]
  perf: Segmentation fault
  Obtained 12 stack frames.
  ./perf/perf(+0x197673) [0x55f99710b673]
  /lib/x86_64-linux-gnu/libc.so.6(+0x3ef0f) [0x7fa45f3cff0f]
  ./perf/perf(+0x8eb40) [0x55f997002b40]
  ./perf/perf(+0x1f6882) [0x55f99716a882]
  ./perf/perf(+0x794c2) [0x55f996fed4c2]
  ./perf/perf(+0x7b7c7) [0x55f996fef7c7]
  ./perf/perf(+0x9074b) [0x55f99700474b]
  ./perf/perf(+0x12e23c) [0x55f9970a223c]
  ./perf/perf(+0x12e54a) [0x55f9970a254a]
  ./perf/perf(+0x7db60) [0x55f996ff1b60]
  /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fa45f3b2c86]
  ./perf/perf(+0x7dfe9) [0x55f996ff1fe9]
  Segmentation fault (core dumped)

backtrace of the core file is as follows:

  (gdb) bt
  #0  record__bytes_written (rec=0x55f99755a200 <record>) at builtin-record.c:234
  #1  record__output_max_size_exceeded (rec=0x55f99755a200 <record>) at builtin-record.c:242
  #2  record__write (map=0x0, size=12816, bf=0x55f9978da2e0, rec=0x55f99755a200 <record>) at builtin-record.c:263
  #3  process_synthesized_event (tool=tool@entry=0x55f99755a200 <record>, event=event@entry=0x55f9978da2e0, sample=sample@entry=0x0, machine=machine@entry=0x55f997893658) at builtin-record.c:618
  #4  0x000055f99716a883 in __perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=0x55f9978928b0, machine=machine@entry=0x55f997893658,
      from=from@entry=0) at util/synthetic-events.c:1895
  #5  0x000055f99716a91f in perf_event__synthesize_id_index (tool=tool@entry=0x55f99755a200 <record>, process=process@entry=0x55f997002aa0 <process_synthesized_event>, evlist=<optimized out>, machine=machine@entry=0x55f997893658)
      at util/synthetic-events.c:1905
  #6  0x000055f996fed4c3 in record__synthesize (tail=tail@entry=true, rec=0x55f99755a200 <record>) at builtin-record.c:1997
  #7  0x000055f996fef7c8 in __cmd_record (argc=argc@entry=2, argv=argv@entry=0x7ffc67551260, rec=0x55f99755a200 <record>) at builtin-record.c:2802
  #8  0x000055f99700474c in cmd_record (argc=<optimized out>, argv=0x7ffc67551260) at builtin-record.c:4258
  #9  0x000055f9970a223d in run_builtin (p=0x55f997564d88 <commands+264>, argc=10, argv=0x7ffc67551260) at perf.c:330
  #10 0x000055f9970a254b in handle_internal_command (argc=10, argv=0x7ffc67551260) at perf.c:384
  #11 0x000055f996ff1b61 in run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:428
  #12 main (argc=<optimized out>, argv=0x7ffc67551260) at perf.c:562

The reason is that record__bytes_written accesses the freed memory rec->thread_data,
The process is as follows:
  __cmd_record
    -> record__free_thread_data
      -> zfree(&rec->thread_data)         // free rec->thread_data
    -> record__synthesize
      -> perf_event__synthesize_id_index
        -> process_synthesized_event
          -> record__write
            -> record__bytes_written      // access rec->thread_data

We add a member variable "thread_bytes_written" in the struct "record"
to save the data size written by the threads.

Fixes: 6d57581 ("perf record: Add support for limit perf output file size")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiwei Sun <jiwei.sun@windriver.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/CAM9d7ci_TRrqBQVQNW8=GwakUr7SsZpYxaaty-S4bxF8zJWyqw@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 15, 2023
…dler

commit 42e19e6 upstream.

Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last  enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last  enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G                 N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
 [<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
 [<00000003e3d02e82>] __might_resched+0x60a/0x668
 [<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
 [<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
 [<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
 [<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
 [<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
 [<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
 [<00000003e3ce30f8>] kthread+0x2d0/0x398
 [<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
 [<00000003e60ccada>] ret_from_fork+0xa/0x40

The reason for this error report is that kprobes handling code failed
to restore irqs.

The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep  <- original kprobe (saves kprobe_saved_imask)
enable_singlestep  <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)

There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.

Cc: stable@vger.kernel.org
Fixes: 4ba069b ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Mar 15, 2023
commit 60eed1e upstream.

code path:

ocfs2_ioctl_move_extents
 ocfs2_move_extents
  ocfs2_defrag_extent
   __ocfs2_move_extent
    + ocfs2_journal_access_di
    + ocfs2_split_extent  //sub-paths call jbd2_journal_restart
    + ocfs2_journal_dirty //crash by jbs2 ASSERT

crash stacks:

PID: 11297  TASK: ffff974a676dcd00  CPU: 67  COMMAND: "defragfs.ocfs2"
 #0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
 #1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
 #2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
 #3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
 #4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
 #5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
 #6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
    [exception RIP: jbd2_journal_dirty_metadata+0x2ba]
    RIP: ffffffffc09ca54a  RSP: ffffb25d8dad3b70  RFLAGS: 00010207
    RAX: 0000000000000000  RBX: ffff9706eedc5248  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: ffff97337029ea28  RDI: ffff9706eedc5250
    RBP: ffff9703c3520200   R8: 000000000f46b0b2   R9: 0000000000000000
    R10: 0000000000000001  R11: 00000001000000fe  R12: ffff97337029ea28
    R13: 0000000000000000  R14: ffff9703de59bf60  R15: ffff9706eedc5250
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
 #8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
 #9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]

Analysis

This bug has the same root cause of 'commit 7f27ec9 ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'.  For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.

How to fix

For ocfs2_split_extent() can handle journal operations totally by itself.
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair.  The fix method is to remove
journal access/dirty from __ocfs2_move_extent().

The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html

Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Mar 15, 2023
[ Upstream commit e9e4229 ]

The TC architecture allows filters and actions to be created independently.
In filters the user can reference action objects using:
tc action add action pedit ... index 1
tc filter add ... action pedit index 1

In the current code for act_pedit this is broken as it checks netlink
attributes for create/update before actually checking if we are binding to an
existing action.

tdc results:
1..69
ok 1 319a - Add pedit action that mangles IP TTL
ok 2 7e67 - Replace pedit action with invalid goto chain
ok 3 377e - Add pedit action with RAW_OP offset u32
ok 4 a0ca - Add pedit action with RAW_OP offset u32 (INVALID)
ok 5 dd8a - Add pedit action with RAW_OP offset u16 u16
ok 6 53db - Add pedit action with RAW_OP offset u16 (INVALID)
ok 7 5c7e - Add pedit action with RAW_OP offset u8 add value
ok 8 2893 - Add pedit action with RAW_OP offset u8 quad
ok 9 3a07 - Add pedit action with RAW_OP offset u8-u16-u8
ok 10 ab0f - Add pedit action with RAW_OP offset u16-u8-u8
ok 11 9d12 - Add pedit action with RAW_OP offset u32 set u16 clear u8 invert
ok 12 ebfa - Add pedit action with RAW_OP offset overflow u32 (INVALID)
ok 13 f512 - Add pedit action with RAW_OP offset u16 at offmask shift set
ok 14 c2cb - Add pedit action with RAW_OP offset u32 retain value
ok 15 1762 - Add pedit action with RAW_OP offset u8 clear value
ok 16 bcee - Add pedit action with RAW_OP offset u8 retain value
ok 17 e89f - Add pedit action with RAW_OP offset u16 retain value
ok 18 c282 - Add pedit action with RAW_OP offset u32 clear value
ok 19 c422 - Add pedit action with RAW_OP offset u16 invert value
ok 20 d3d3 - Add pedit action with RAW_OP offset u32 invert value
ok 21 57e5 - Add pedit action with RAW_OP offset u8 preserve value
ok 22 99e0 - Add pedit action with RAW_OP offset u16 preserve value
ok 23 1892 - Add pedit action with RAW_OP offset u32 preserve value
ok 24 4b60 - Add pedit action with RAW_OP negative offset u16/u32 set value
ok 25 a5a7 - Add pedit action with LAYERED_OP eth set src
ok 26 86d4 - Add pedit action with LAYERED_OP eth set src & dst
ok 27 f8a9 - Add pedit action with LAYERED_OP eth set dst
ok 28 c715 - Add pedit action with LAYERED_OP eth set src (INVALID)
ok 29 8131 - Add pedit action with LAYERED_OP eth set dst (INVALID)
ok 30 ba22 - Add pedit action with LAYERED_OP eth type set/clear sequence
ok 31 dec4 - Add pedit action with LAYERED_OP eth set type (INVALID)
ok 32 ab06 - Add pedit action with LAYERED_OP eth add type
ok 33 918d - Add pedit action with LAYERED_OP eth invert src
ok 34 a8d4 - Add pedit action with LAYERED_OP eth invert dst
ok 35 ee13 - Add pedit action with LAYERED_OP eth invert type
ok 36 7588 - Add pedit action with LAYERED_OP ip set src
ok 37 0fa7 - Add pedit action with LAYERED_OP ip set dst
ok 38 5810 - Add pedit action with LAYERED_OP ip set src & dst
ok 39 1092 - Add pedit action with LAYERED_OP ip set ihl & dsfield
ok 40 02d8 - Add pedit action with LAYERED_OP ip set ttl & protocol
ok 41 3e2d - Add pedit action with LAYERED_OP ip set ttl (INVALID)
ok 42 31ae - Add pedit action with LAYERED_OP ip ttl clear/set
ok 43 486f - Add pedit action with LAYERED_OP ip set duplicate fields
ok 44 e790 - Add pedit action with LAYERED_OP ip set ce, df, mf, firstfrag, nofrag fields
ok 45 cc8a - Add pedit action with LAYERED_OP ip set tos
ok 46 7a17 - Add pedit action with LAYERED_OP ip set precedence
ok 47 c3b6 - Add pedit action with LAYERED_OP ip add tos
ok 48 43d3 - Add pedit action with LAYERED_OP ip add precedence
ok 49 438e - Add pedit action with LAYERED_OP ip clear tos
ok 50 6b1b - Add pedit action with LAYERED_OP ip clear precedence
ok 51 824a - Add pedit action with LAYERED_OP ip invert tos
ok 52 106f - Add pedit action with LAYERED_OP ip invert precedence
ok 53 6829 - Add pedit action with LAYERED_OP beyond ip set dport & sport
ok 54 afd8 - Add pedit action with LAYERED_OP beyond ip set icmp_type & icmp_code
ok 55 3143 - Add pedit action with LAYERED_OP beyond ip set dport (INVALID)
ok 56 815c - Add pedit action with LAYERED_OP ip6 set src
ok 57 4dae - Add pedit action with LAYERED_OP ip6 set dst
ok 58 fc1f - Add pedit action with LAYERED_OP ip6 set src & dst
ok 59 6d34 - Add pedit action with LAYERED_OP ip6 dst retain value (INVALID)
ok 60 94bb - Add pedit action with LAYERED_OP ip6 traffic_class
ok 61 6f5e - Add pedit action with LAYERED_OP ip6 flow_lbl
ok 62 6795 - Add pedit action with LAYERED_OP ip6 set payload_len, nexthdr, hoplimit
ok 63 1442 - Add pedit action with LAYERED_OP tcp set dport & sport
ok 64 b7ac - Add pedit action with LAYERED_OP tcp sport set (INVALID)
ok 65 cfcc - Add pedit action with LAYERED_OP tcp flags set
ok 66 3bc4 - Add pedit action with LAYERED_OP tcp set dport, sport & flags fields
ok 67 f1c8 - Add pedit action with LAYERED_OP udp set dport & sport
ok 68 d784 - Add pedit action with mixed RAW/LAYERED_OP #1
ok 69 70ca - Add pedit action with mixed RAW/LAYERED_OP #2

Fixes: 71d0ed7 ("net/act_pedit: Support using offset relative to the conventional network headers")
Fixes: f67169f ("net/sched: act_pedit: fix WARN() in the traffic path")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 15, 2023
[ Upstream commit 3dca1f8 ]

Don't hold sdw_dev_lock while calling the peripheral driver
probe() and remove() callbacks.

Holding sdw_dev_lock around the probe() and remove() calls causes
a theoretical mutex inversion which lockdep will assert on.

During probe() the sdw_dev_lock mutex is taken first and then
ASoC/ALSA locks are taken by the probe() implementation.

During normal operation ASoC can take its locks and then trigger
a runtime resume of the component. The SoundWire resume will then
take sdw_dev_lock. This is the reverse order compared to probe().

It's not necessary to hold sdw_dev_lock when calling the probe()
and remove(), it is only used to prevent the bus core calling the
driver callbacks if there isn't a driver or the driver is removing.

All calls to the driver callbacks are guarded by the 'probed' flag.
So if sdw_dev_lock is held while setting and clearing the 'probed'
flag this is sufficient to guarantee the safety of callback
functions.

Removing the mutex from around the call to probe() means that it
is now possible for a bus event (PING response) to be handled in
parallel with the probe(). But sdw_bus_probe() already has
handling for this by calling the device update_status() after
the probe() has completed.

Example lockdep assert:
[   46.098514] ======================================================
[   46.104736] WARNING: possible circular locking dependency detected
[   46.110961] 6.1.0-rc4-jamerson #1 Tainted: G            E
[   46.116842] ------------------------------------------------------
[   46.123063] mpg123/1130 is trying to acquire lock:
[   46.127883] ffff8b445031fb80 (&slave->sdw_dev_lock){+.+.}-{3:3}, at: sdw_update_slave_status+0x26/0x70
[   46.137225]
               but task is already holding lock:
[   46.143074] ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830
[   46.151536]
               which lock already depends on the new lock.[   46.159732]
               the existing dependency chain (in reverse order) is:
[   46.167231]
               -> #4 (&card->pcm_mutex){+.+.}-{3:3}:
[   46.173428]        __mutex_lock+0x94/0x920
[   46.177542]        snd_soc_dpcm_runtime_update+0x2e/0x100
[   46.182958]        snd_soc_dapm_put_enum_double+0x1c2/0x200
[   46.188548]        snd_ctl_elem_write+0x10c/0x1d0
[   46.193268]        snd_ctl_ioctl+0x126/0x850
[   46.197556]        __x64_sys_ioctl+0x87/0xc0
[   46.201845]        do_syscall_64+0x38/0x90
[   46.205959]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.211553]
               -> #3 (&card->controls_rwsem){++++}-{3:3}:
[   46.218188]        down_write+0x2b/0xd0
[   46.222038]        snd_ctl_add_replace+0x39/0xb0
[   46.226672]        snd_soc_add_controls+0x53/0x80
[   46.231393]        soc_probe_component+0x1e4/0x2a0
[   46.236202]        snd_soc_bind_card+0x51a/0xc80
[   46.240836]        devm_snd_soc_register_card+0x43/0x90
[   46.246079]        mc_probe+0x982/0xfe0 [snd_soc_sof_sdw]
[   46.251500]        platform_probe+0x3c/0xa0
[   46.255700]        really_probe+0xde/0x390
[   46.259814]        __driver_probe_device+0x78/0x180
[   46.264710]        driver_probe_device+0x1e/0x90
[   46.269347]        __driver_attach+0x9f/0x1f0
[   46.273721]        bus_for_each_dev+0x78/0xc0
[   46.278098]        bus_add_driver+0x1ac/0x200
[   46.282473]        driver_register+0x8f/0xf0
[   46.286759]        do_one_initcall+0x58/0x310
[   46.291136]        do_init_module+0x4c/0x1f0
[   46.295422]        __do_sys_finit_module+0xb4/0x130
[   46.300321]        do_syscall_64+0x38/0x90
[   46.304434]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.310027]
               -> #2 (&card->mutex){+.+.}-{3:3}:
[   46.315883]        __mutex_lock+0x94/0x920
[   46.320000]        snd_soc_bind_card+0x3e/0xc80
[   46.324551]        devm_snd_soc_register_card+0x43/0x90
[   46.329798]        mc_probe+0x982/0xfe0 [snd_soc_sof_sdw]
[   46.335219]        platform_probe+0x3c/0xa0
[   46.339420]        really_probe+0xde/0x390
[   46.343532]        __driver_probe_device+0x78/0x180
[   46.348430]        driver_probe_device+0x1e/0x90
[   46.353065]        __driver_attach+0x9f/0x1f0
[   46.357437]        bus_for_each_dev+0x78/0xc0
[   46.361812]        bus_add_driver+0x1ac/0x200
[   46.366716]        driver_register+0x8f/0xf0
[   46.371528]        do_one_initcall+0x58/0x310
[   46.376424]        do_init_module+0x4c/0x1f0
[   46.381239]        __do_sys_finit_module+0xb4/0x130
[   46.386665]        do_syscall_64+0x38/0x90
[   46.391299]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.397416]
               -> #1 (client_mutex){+.+.}-{3:3}:
[   46.404307]        __mutex_lock+0x94/0x920
[   46.408941]        snd_soc_add_component+0x24/0x2c0
[   46.414345]        devm_snd_soc_register_component+0x54/0xa0
[   46.420522]        cs35l56_common_probe+0x280/0x370 [snd_soc_cs35l56]
[   46.427487]        cs35l56_sdw_probe+0xf4/0x170 [snd_soc_cs35l56_sdw]
[   46.434442]        sdw_drv_probe+0x80/0x1a0
[   46.439136]        really_probe+0xde/0x390
[   46.443738]        __driver_probe_device+0x78/0x180
[   46.449120]        driver_probe_device+0x1e/0x90
[   46.454247]        __driver_attach+0x9f/0x1f0
[   46.459106]        bus_for_each_dev+0x78/0xc0
[   46.463971]        bus_add_driver+0x1ac/0x200
[   46.468825]        driver_register+0x8f/0xf0
[   46.473592]        do_one_initcall+0x58/0x310
[   46.478441]        do_init_module+0x4c/0x1f0
[   46.483202]        __do_sys_finit_module+0xb4/0x130
[   46.488572]        do_syscall_64+0x38/0x90
[   46.493158]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.499229]
               -> #0 (&slave->sdw_dev_lock){+.+.}-{3:3}:
[   46.506737]        __lock_acquire+0x1121/0x1df0
[   46.511765]        lock_acquire+0xd5/0x300
[   46.516360]        __mutex_lock+0x94/0x920
[   46.520949]        sdw_update_slave_status+0x26/0x70
[   46.526409]        sdw_clear_slave_status+0xd8/0xe0
[   46.531783]        intel_resume_runtime+0x139/0x2a0
[   46.537155]        __rpm_callback+0x41/0x120
[   46.541919]        rpm_callback+0x5d/0x70
[   46.546422]        rpm_resume+0x531/0x7e0
[   46.550920]        __pm_runtime_resume+0x4a/0x80
[   46.556024]        snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0
[   46.562611]        __soc_pcm_open+0x62/0x520
[   46.567375]        dpcm_be_dai_startup+0x116/0x210
[   46.572661]        dpcm_fe_dai_open+0xf7/0x830
[   46.577597]        snd_pcm_open_substream+0x54a/0x8b0
[   46.583145]        snd_pcm_open.part.0+0xdc/0x200
[   46.588341]        snd_pcm_playback_open+0x51/0x80
[   46.593625]        chrdev_open+0xc0/0x250
[   46.598129]        do_dentry_open+0x15f/0x430
[   46.602981]        path_openat+0x75e/0xa80
[   46.607575]        do_filp_open+0xb2/0x160
[   46.612162]        do_sys_openat2+0x9a/0x160
[   46.616922]        __x64_sys_openat+0x53/0xa0
[   46.621767]        do_syscall_64+0x38/0x90
[   46.626352]        entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.632414]
               other info that might help us debug this:[   46.641862] Chain exists of:
                 &slave->sdw_dev_lock --> &card->controls_rwsem --> &card->pcm_mutex[   46.655145]  Possible unsafe locking scenario:[   46.662048]        CPU0                    CPU1
[   46.667080]        ----                    ----
[   46.672108]   lock(&card->pcm_mutex);
[   46.676267]                                lock(&card->controls_rwsem);
[   46.683382]                                lock(&card->pcm_mutex);
[   46.690063]   lock(&slave->sdw_dev_lock);
[   46.694574]
                *** DEADLOCK ***[   46.701942] 2 locks held by mpg123/1130:
[   46.706356]  #0: ffff8b4457b22b90 (&pcm->open_mutex){+.+.}-{3:3}, at: snd_pcm_open.part.0+0xc9/0x200
[   46.715999]  #1: ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830
[   46.725390]
               stack backtrace:
[   46.730752] CPU: 0 PID: 1130 Comm: mpg123 Tainted: G            E      6.1.0-rc4-jamerson #1
[   46.739703] Hardware name: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020
[   46.747270] Call Trace:
[   46.750239]  <TASK>
[   46.752857]  dump_stack_lvl+0x56/0x73
[   46.757045]  check_noncircular+0x102/0x120
[   46.761664]  __lock_acquire+0x1121/0x1df0
[   46.766197]  lock_acquire+0xd5/0x300
[   46.770292]  ? sdw_update_slave_status+0x26/0x70
[   46.775432]  ? lock_is_held_type+0xe2/0x140
[   46.780143]  __mutex_lock+0x94/0x920
[   46.784241]  ? sdw_update_slave_status+0x26/0x70
[   46.789387]  ? find_held_lock+0x2b/0x80
[   46.793750]  ? sdw_update_slave_status+0x26/0x70
[   46.798894]  ? lock_release+0x147/0x2f0
[   46.803262]  ? lockdep_init_map_type+0x47/0x250
[   46.808315]  ? sdw_update_slave_status+0x26/0x70
[   46.813456]  sdw_update_slave_status+0x26/0x70
[   46.818422]  sdw_clear_slave_status+0xd8/0xe0
[   46.823302]  ? pm_generic_runtime_suspend+0x30/0x30
[   46.828706]  intel_resume_runtime+0x139/0x2a0
[   46.833583]  ? _raw_spin_unlock_irq+0x24/0x50
[   46.838462]  ? pm_generic_runtime_suspend+0x30/0x30
[   46.843866]  __rpm_callback+0x41/0x120
[   46.848142]  ? pm_generic_runtime_suspend+0x30/0x30
[   46.853550]  rpm_callback+0x5d/0x70
[   46.857568]  rpm_resume+0x531/0x7e0
[   46.861578]  ? _raw_spin_lock_irqsave+0x62/0x70
[   46.866634]  __pm_runtime_resume+0x4a/0x80
[   46.871258]  snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0
[   46.877358]  __soc_pcm_open+0x62/0x520
[   46.881634]  ? dpcm_add_paths.isra.0+0x35d/0x4c0
[   46.886784]  dpcm_be_dai_startup+0x116/0x210
[   46.891592]  dpcm_fe_dai_open+0xf7/0x830
[   46.896046]  ? debug_mutex_init+0x33/0x50
[   46.900591]  snd_pcm_open_substream+0x54a/0x8b0
[   46.905658]  snd_pcm_open.part.0+0xdc/0x200
[   46.910376]  ? wake_up_q+0x90/0x90
[   46.914312]  snd_pcm_playback_open+0x51/0x80
[   46.919118]  chrdev_open+0xc0/0x250
[   46.923147]  ? cdev_device_add+0x90/0x90
[   46.927608]  do_dentry_open+0x15f/0x430
[   46.931976]  path_openat+0x75e/0xa80
[   46.936086]  do_filp_open+0xb2/0x160
[   46.940194]  ? lock_release+0x147/0x2f0
[   46.944563]  ? _raw_spin_unlock+0x29/0x50
[   46.949101]  do_sys_openat2+0x9a/0x160
[   46.953377]  __x64_sys_openat+0x53/0xa0
[   46.957733]  do_syscall_64+0x38/0x90
[   46.961829]  entry_SYSCALL_64_after_hwframe+0x63/0xcd
[   46.967402] RIP: 0033:0x7fa6397ccd3b
[   46.971506] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25
[   46.991413] RSP: 002b:00007fff838e8990 EFLAGS: 00000246 ORIG_RAX: 0000000000000101
[   46.999580] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007fa6397ccd3b
[   47.007311] RDX: 0000000000080802 RSI: 00007fff838e8b50 RDI: 00000000ffffff9c
[   47.015047] RBP: 00007fff838e8b50 R08: 0000000000000000 R09: 0000000000000011
[   47.022787] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802
[   47.030539] R13: 0000000000000004 R14: 0000000000000000 R15: 00007fff838e8b50
[   47.038289]  </TASK>

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230123172520.339367-1-rf@opensource.cirrus.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Mar 15, 2023
commit 0e68b55 upstream.

Running a rt-kernel base on 6.2.0-rc3-rt1 on an Ampere Altra outputs
the following:
  BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
  in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 9, name: kworker/u320:0
  preempt_count: 2, expected: 0
  RCU nest depth: 0, expected: 0
  3 locks held by kworker/u320:0/9:
  #0: ffff3fff8c27d128 ((wq_completion)efi_rts_wq){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
  #1: ffff80000861bdd0 ((work_completion)(&efi_rts_work.work)){+.+.}-{0:0}, at: process_one_work (./include/linux/atomic/atomic-long.h:41)
  #2: ffffdf7e1ed3e460 (efi_rt_lock){+.+.}-{3:3}, at: efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
  Preemption disabled at:
  efi_virtmap_load (./arch/arm64/include/asm/mmu_context.h:248)
  CPU: 0 PID: 9 Comm: kworker/u320:0 Tainted: G        W          6.2.0-rc3-rt1
  Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
  Workqueue: efi_rts_wq efi_call_rts
  Call trace:
  dump_backtrace (arch/arm64/kernel/stacktrace.c:158)
  show_stack (arch/arm64/kernel/stacktrace.c:165)
  dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
  dump_stack (lib/dump_stack.c:114)
  __might_resched (kernel/sched/core.c:10134)
  rt_spin_lock (kernel/locking/rtmutex.c:1769 (discriminator 4))
  efi_call_rts (drivers/firmware/efi/runtime-wrappers.c:101)
  [...]

This seems to come from commit ff7a167 ("arm64: efi: Execute
runtime services from a dedicated stack") which adds a spinlock. This
spinlock is taken through:
efi_call_rts()
\-efi_call_virt()
  \-efi_call_virt_pointer()
    \-arch_efi_call_virt_setup()

Make 'efi_rt_lock' a raw_spinlock to avoid being preempted.

[ardb: The EFI runtime services are called with a different set of
       translation tables, and are permitted to use the SIMD registers.
       The context switch code preserves/restores neither, and so EFI
       calls must be made with preemption disabled, rather than only
       disabling migration.]

Fixes: ff7a167 ("arm64: efi: Execute runtime services from a dedicated stack")
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Mar 21, 2023
[ Upstream commit 6c20822 ]

&xdp_buff and &xdp_frame are bound in a way that

xdp_buff->data_hard_start == xdp_frame

It's always the case and e.g. xdp_convert_buff_to_frame() relies on
this.
IOW, the following:

	for (u32 i = 0; i < 0xdead; i++) {
		xdpf = xdp_convert_buff_to_frame(&xdp);
		xdp_convert_frame_to_buff(xdpf, &xdp);
	}

shouldn't ever modify @xdpf's contents or the pointer itself.
However, "live packet" code wrongly treats &xdp_frame as part of its
context placed *before* the data_hard_start. With such flow,
data_hard_start is sizeof(*xdpf) off to the right and no longer points
to the XDP frame.

Instead of replacing `sizeof(ctx)` with `offsetof(ctx, xdpf)` in several
places and praying that there are no more miscalcs left somewhere in the
code, unionize ::frm with ::data in a flex array, so that both starts
pointing to the actual data_hard_start and the XDP frame actually starts
being a part of it, i.e. a part of the headroom, not the context.
A nice side effect is that the maximum frame size for this mode gets
increased by 40 bytes, as xdp_buff::frame_sz includes everything from
data_hard_start (-> includes xdpf already) to the end of XDP/skb shared
info.
Also update %MAX_PKT_SIZE accordingly in the selftests code. Leave it
hardcoded for 64 bit && 4k pages, it can be made more flexible later on.

Minor: align `&head->data` with how `head->frm` is assigned for
consistency.
Minor #2: rename 'frm' to 'frame' in &xdp_page_head while at it for
clarity.

(was found while testing XDP traffic generator on ice, which calls
 xdp_convert_frame_to_buff() for each XDP frame)

Fixes: b530e9e ("bpf: Add "live packet" mode for XDP in BPF_PROG_RUN")
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20230215185440.4126672-1-aleksander.lobakin@intel.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Apr 1, 2023
[ Upstream commit 13085e1 ]

The following LOCKDEP was detected:
		Workqueue: events smc_lgr_free_work [smc]
		WARNING: possible circular locking dependency detected
		6.1.0-20221027.rc2.git8.56bc5b569087.300.fc36.s390x+debug #1 Not tainted
		------------------------------------------------------
		kworker/3:0/176251 is trying to acquire lock:
		00000000f1467148 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0},
			at: __flush_workqueue+0x7a/0x4f0
		but task is already holding lock:
		0000037fffe97dc8 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0},
			at: process_one_work+0x232/0x730
		which lock already depends on the new lock.
		the existing dependency chain (in reverse order) is:
		-> #4 ((work_completion)(&(&lgr->free_work)->work)){+.+.}-{0:0}:
		       __lock_acquire+0x58e/0xbd8
		       lock_acquire.part.0+0xe2/0x248
		       lock_acquire+0xac/0x1c8
		       __flush_work+0x76/0xf0
		       __cancel_work_timer+0x170/0x220
		       __smc_lgr_terminate.part.0+0x34/0x1c0 [smc]
		       smc_connect_rdma+0x15e/0x418 [smc]
		       __smc_connect+0x234/0x480 [smc]
		       smc_connect+0x1d6/0x230 [smc]
		       __sys_connect+0x90/0xc0
		       __do_sys_socketcall+0x186/0x370
		       __do_syscall+0x1da/0x208
		       system_call+0x82/0xb0
		-> #3 (smc_client_lgr_pending){+.+.}-{3:3}:
		       __lock_acquire+0x58e/0xbd8
		       lock_acquire.part.0+0xe2/0x248
		       lock_acquire+0xac/0x1c8
		       __mutex_lock+0x96/0x8e8
		       mutex_lock_nested+0x32/0x40
		       smc_connect_rdma+0xa4/0x418 [smc]
		       __smc_connect+0x234/0x480 [smc]
		       smc_connect+0x1d6/0x230 [smc]
		       __sys_connect+0x90/0xc0
		       __do_sys_socketcall+0x186/0x370
		       __do_syscall+0x1da/0x208
		       system_call+0x82/0xb0
		-> #2 (sk_lock-AF_SMC){+.+.}-{0:0}:
		       __lock_acquire+0x58e/0xbd8
		       lock_acquire.part.0+0xe2/0x248
		       lock_acquire+0xac/0x1c8
		       lock_sock_nested+0x46/0xa8
		       smc_tx_work+0x34/0x50 [smc]
		       process_one_work+0x30c/0x730
		       worker_thread+0x62/0x420
		       kthread+0x138/0x150
		       __ret_from_fork+0x3c/0x58
		       ret_from_fork+0xa/0x40
		-> #1 ((work_completion)(&(&smc->conn.tx_work)->work)){+.+.}-{0:0}:
		       __lock_acquire+0x58e/0xbd8
		       lock_acquire.part.0+0xe2/0x248
		       lock_acquire+0xac/0x1c8
		       process_one_work+0x2bc/0x730
		       worker_thread+0x62/0x420
		       kthread+0x138/0x150
		       __ret_from_fork+0x3c/0x58
		       ret_from_fork+0xa/0x40
		-> #0 ((wq_completion)smc_tx_wq-00000000#2){+.+.}-{0:0}:
		       check_prev_add+0xd8/0xe88
		       validate_chain+0x70c/0xb20
		       __lock_acquire+0x58e/0xbd8
		       lock_acquire.part.0+0xe2/0x248
		       lock_acquire+0xac/0x1c8
		       __flush_workqueue+0xaa/0x4f0
		       drain_workqueue+0xaa/0x158
		       destroy_workqueue+0x44/0x2d8
		       smc_lgr_free+0x9e/0xf8 [smc]
		       process_one_work+0x30c/0x730
		       worker_thread+0x62/0x420
		       kthread+0x138/0x150
		       __ret_from_fork+0x3c/0x58
		       ret_from_fork+0xa/0x40
		other info that might help us debug this:
		Chain exists of:
		  (wq_completion)smc_tx_wq-00000000#2
	  	  --> smc_client_lgr_pending
		  --> (work_completion)(&(&lgr->free_work)->work)
		 Possible unsafe locking scenario:
		       CPU0                    CPU1
		       ----                    ----
		  lock((work_completion)(&(&lgr->free_work)->work));
		                   lock(smc_client_lgr_pending);
		                   lock((work_completion)
					(&(&lgr->free_work)->work));
		  lock((wq_completion)smc_tx_wq-00000000#2);
		 *** DEADLOCK ***
		2 locks held by kworker/3:0/176251:
		 #0: 0000000080183548
			((wq_completion)events){+.+.}-{0:0},
				at: process_one_work+0x232/0x730
		 #1: 0000037fffe97dc8
			((work_completion)
			 (&(&lgr->free_work)->work)){+.+.}-{0:0},
				at: process_one_work+0x232/0x730
		stack backtrace:
		CPU: 3 PID: 176251 Comm: kworker/3:0 Not tainted
		Hardware name: IBM 8561 T01 701 (z/VM 7.2.0)
		Call Trace:
		 [<000000002983c3e4>] dump_stack_lvl+0xac/0x100
		 [<0000000028b477ae>] check_noncircular+0x13e/0x160
		 [<0000000028b48808>] check_prev_add+0xd8/0xe88
		 [<0000000028b49cc4>] validate_chain+0x70c/0xb20
		 [<0000000028b4bd26>] __lock_acquire+0x58e/0xbd8
		 [<0000000028b4cf6a>] lock_acquire.part.0+0xe2/0x248
		 [<0000000028b4d17c>] lock_acquire+0xac/0x1c8
		 [<0000000028addaaa>] __flush_workqueue+0xaa/0x4f0
		 [<0000000028addf9a>] drain_workqueue+0xaa/0x158
		 [<0000000028ae303c>] destroy_workqueue+0x44/0x2d8
		 [<000003ff8029af26>] smc_lgr_free+0x9e/0xf8 [smc]
		 [<0000000028adf3d4>] process_one_work+0x30c/0x730
		 [<0000000028adf85a>] worker_thread+0x62/0x420
		 [<0000000028aeac50>] kthread+0x138/0x150
		 [<0000000028a63914>] __ret_from_fork+0x3c/0x58
		 [<00000000298503da>] ret_from_fork+0xa/0x40
		INFO: lockdep is turned off.
===================================================================

This deadlock occurs because cancel_delayed_work_sync() waits for
the work(&lgr->free_work) to finish, while the &lgr->free_work
waits for the work(lgr->tx_wq), which needs the sk_lock-AF_SMC, that
is already used under the mutex_lock.

The solution is to use cancel_delayed_work() instead, which kills
off a pending work.

Fixes: a52bcc9 ("net/smc: improve termination processing")
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Apr 1, 2023
…omic context

commit 38ed310 upstream.

The following issue was discovered using lockdep:
[    6.691371] BUG: sleeping function called from invalid context at include/linux/sched/mm.h:209
[    6.694602] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1, name: swapper/0
[    6.702431] 2 locks held by swapper/0/1:
[    6.706300]  #0: ffffff8800f6f188 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x4c/0x90
[    6.714900]  #1: ffffffc009a2abb8 (enable_lock){....}-{2:2}, at: clk_enable_lock+0x4c/0x140
[    6.723156] irq event stamp: 304030
[    6.726596] hardirqs last  enabled at (304029): [<ffffffc008d17ee0>] _raw_spin_unlock_irqrestore+0xc0/0xd0
[    6.736142] hardirqs last disabled at (304030): [<ffffffc00876bc5c>] clk_enable_lock+0xfc/0x140
[    6.744742] softirqs last  enabled at (303958): [<ffffffc0080904f0>] _stext+0x4f0/0x894
[    6.752655] softirqs last disabled at (303951): [<ffffffc0080e53b8>] irq_exit+0x238/0x280
[    6.760744] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G     U            5.15.36 #2
[    6.768048] Hardware name: xlnx,zynqmp (DT)
[    6.772179] Call trace:
[    6.774584]  dump_backtrace+0x0/0x300
[    6.778197]  show_stack+0x18/0x30
[    6.781465]  dump_stack_lvl+0xb8/0xec
[    6.785077]  dump_stack+0x1c/0x38
[    6.788345]  ___might_sleep+0x1a8/0x2a0
[    6.792129]  __might_sleep+0x6c/0xd0
[    6.795655]  kmem_cache_alloc_trace+0x270/0x3d0
[    6.800127]  do_feature_check_call+0x100/0x220
[    6.804513]  zynqmp_pm_invoke_fn+0x8c/0xb0
[    6.808555]  zynqmp_pm_clock_getstate+0x90/0xe0
[    6.813027]  zynqmp_pll_is_enabled+0x8c/0x120
[    6.817327]  zynqmp_pll_enable+0x38/0xc0
[    6.821197]  clk_core_enable+0x144/0x400
[    6.825067]  clk_core_enable+0xd4/0x400
[    6.828851]  clk_core_enable+0xd4/0x400
[    6.832635]  clk_core_enable+0xd4/0x400
[    6.836419]  clk_core_enable+0xd4/0x400
[    6.840203]  clk_core_enable+0xd4/0x400
[    6.843987]  clk_core_enable+0xd4/0x400
[    6.847771]  clk_core_enable+0xd4/0x400
[    6.851555]  clk_core_enable_lock+0x24/0x50
[    6.855683]  clk_enable+0x24/0x40
[    6.858952]  fclk_probe+0x84/0xf0
[    6.862220]  platform_probe+0x8c/0x110
[    6.865918]  really_probe+0x110/0x5f0
[    6.869530]  __driver_probe_device+0xcc/0x210
[    6.873830]  driver_probe_device+0x64/0x140
[    6.877958]  __driver_attach+0x114/0x1f0
[    6.881828]  bus_for_each_dev+0xe8/0x160
[    6.885698]  driver_attach+0x34/0x50
[    6.889224]  bus_add_driver+0x228/0x300
[    6.893008]  driver_register+0xc0/0x1e0
[    6.896792]  __platform_driver_register+0x44/0x60
[    6.901436]  fclk_driver_init+0x1c/0x28
[    6.905220]  do_one_initcall+0x104/0x590
[    6.909091]  kernel_init_freeable+0x254/0x2bc
[    6.913390]  kernel_init+0x24/0x130
[    6.916831]  ret_from_fork+0x10/0x20

Fix it by passing the GFP_ATOMIC gfp flag for the corresponding
memory allocation.

Fixes: acfdd18 ("firmware: xilinx: Use hash-table for api feature check")
Cc: stable <stable@kernel.org>
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20230308222602.123866-1-roman.gushchin@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Jul 22, 2025
 into HEAD

KVM/riscv fixes for 6.16, take #2

- Disable vstimecmp before exiting to user-space
- Move HGEI[E|P] CSR access to IMSIC virtualization
chewitt pushed a commit that referenced this pull request Aug 20, 2025
[ Upstream commit 8b428f4 ]

nbd grabs device lock nbd->config_lock for updating nr_hw_queues, this
ways cause the following lock dependency:

-> #2 (&disk->open_mutex){+.+.}-{4:4}:
       lock_acquire kernel/locking/lockdep.c:5871 [inline]
       lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828
       __mutex_lock_common kernel/locking/mutex.c:602 [inline]
       __mutex_lock+0x166/0x1292 kernel/locking/mutex.c:747
       mutex_lock_nested+0x14/0x1c kernel/locking/mutex.c:799
       __del_gendisk+0x132/0xac6 block/genhd.c:706
       del_gendisk+0xf6/0x19a block/genhd.c:819
       nbd_dev_remove+0x3c/0xf2 drivers/block/nbd.c:268
       nbd_dev_remove_work+0x1c/0x26 drivers/block/nbd.c:284
       process_one_work+0x96a/0x1f32 kernel/workqueue.c:3238
       process_scheduled_works kernel/workqueue.c:3321 [inline]
       worker_thread+0x5ce/0xde8 kernel/workqueue.c:3402
       kthread+0x39c/0x7d4 kernel/kthread.c:464
       ret_from_fork_kernel+0x2a/0xbb2 arch/riscv/kernel/process.c:214
       ret_from_fork_kernel_asm+0x16/0x18 arch/riscv/kernel/entry.S:327

-> #1 (&set->update_nr_hwq_lock){++++}-{4:4}:
       lock_acquire kernel/locking/lockdep.c:5871 [inline]
       lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828
       down_write+0x9c/0x19a kernel/locking/rwsem.c:1577
       blk_mq_update_nr_hw_queues+0x3e/0xb86 block/blk-mq.c:5041
       nbd_start_device+0x140/0xb2c drivers/block/nbd.c:1476
       nbd_genl_connect+0xae0/0x1b24 drivers/block/nbd.c:2201
       genl_family_rcv_msg_doit+0x206/0x2e6 net/netlink/genetlink.c:1115
       genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
       genl_rcv_msg+0x514/0x78e net/netlink/genetlink.c:1210
       netlink_rcv_skb+0x206/0x3be net/netlink/af_netlink.c:2534
       genl_rcv+0x36/0x4c net/netlink/genetlink.c:1219
       netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
       netlink_unicast+0x4f0/0x82c net/netlink/af_netlink.c:1339
       netlink_sendmsg+0x85e/0xdd6 net/netlink/af_netlink.c:1883
       sock_sendmsg_nosec net/socket.c:712 [inline]
       __sock_sendmsg+0xcc/0x160 net/socket.c:727
       ____sys_sendmsg+0x63e/0x79c net/socket.c:2566
       ___sys_sendmsg+0x144/0x1e6 net/socket.c:2620
       __sys_sendmsg+0x188/0x246 net/socket.c:2652
       __do_sys_sendmsg net/socket.c:2657 [inline]
       __se_sys_sendmsg net/socket.c:2655 [inline]
       __riscv_sys_sendmsg+0x70/0xa2 net/socket.c:2655
       syscall_handler+0x94/0x118 arch/riscv/include/asm/syscall.h:112
       do_trap_ecall_u+0x396/0x530 arch/riscv/kernel/traps.c:341
       handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197

-> #0 (&nbd->config_lock){+.+.}-{4:4}:
       check_noncircular+0x132/0x146 kernel/locking/lockdep.c:2178
       check_prev_add kernel/locking/lockdep.c:3168 [inline]
       check_prevs_add kernel/locking/lockdep.c:3287 [inline]
       validate_chain kernel/locking/lockdep.c:3911 [inline]
       __lock_acquire+0x12b2/0x24ea kernel/locking/lockdep.c:5240
       lock_acquire kernel/locking/lockdep.c:5871 [inline]
       lock_acquire+0x1ac/0x448 kernel/locking/lockdep.c:5828
       __mutex_lock_common kernel/locking/mutex.c:602 [inline]
       __mutex_lock+0x166/0x1292 kernel/locking/mutex.c:747
       mutex_lock_nested+0x14/0x1c kernel/locking/mutex.c:799
       refcount_dec_and_mutex_lock+0x60/0xd8 lib/refcount.c:118
       nbd_config_put+0x3a/0x610 drivers/block/nbd.c:1423
       nbd_release+0x94/0x15c drivers/block/nbd.c:1735
       blkdev_put_whole+0xac/0xee block/bdev.c:721
       bdev_release+0x3fe/0x600 block/bdev.c:1144
       blkdev_release+0x1a/0x26 block/fops.c:684
       __fput+0x382/0xa8c fs/file_table.c:465
       ____fput+0x1c/0x26 fs/file_table.c:493
       task_work_run+0x16a/0x25e kernel/task_work.c:227
       resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
       exit_to_user_mode_loop+0x118/0x134 kernel/entry/common.c:114
       exit_to_user_mode_prepare include/linux/entry-common.h:330 [inline]
       syscall_exit_to_user_mode_work include/linux/entry-common.h:414 [inline]
       syscall_exit_to_user_mode include/linux/entry-common.h:449 [inline]
       do_trap_ecall_u+0x3f0/0x530 arch/riscv/kernel/traps.c:355
       handle_exception+0x146/0x152 arch/riscv/kernel/entry.S:197

Also it isn't necessary to require nbd->config_lock, because
blk_mq_update_nr_hw_queues() does grab tagset lock for sync everything.

Fixes the issue by releasing ->config_lock & retry in case of concurrent
updating nr_hw_queues.

Fixes: 98e68f6 ("block: prevent adding/deleting disk during updating nr_hw_queues")
Reported-by: syzbot+2bcecf3c38cb3e8fdc8d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6855034f.a00a0220.137b3.0031.GAE@google.com
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Cc: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Link: https://lore.kernel.org/r/20250709111744.2353050-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Aug 20, 2025
[ Upstream commit 36670b6 ]

During beacon miss handling, ath12k driver iterates over active virtual
interfaces (vifs) and attempts to access the radio object (ar) via
arvif->deflink->ar.

However, after commit aa80f12 ("wifi: ath12k: defer vdev creation for
MLO"), arvif is linked to a radio only after vdev creation, typically when
a channel is assigned or a scan is requested.
For P2P capable devices, a default P2P interface is created by
wpa_supplicant along with regular station interfaces, these serve as dummy
interfaces for P2P-capable stations, lack an associated netdev and initiate
frequent scans to discover neighbor p2p devices. When a scan is initiated
on such P2P vifs, driver selects destination radio (ar) based on scan
frequency, creates a scan vdev, and attaches arvif to the radio. Once the
scan completes or is aborted, the scan vdev is deleted, detaching arvif
from the radio and leaving arvif->ar uninitialized.

While handling beacon miss for station interfaces, P2P interface is also
encountered in the vif iteration and ath12k_mac_handle_beacon_miss_iter()
tries to dereference the uninitialized arvif->deflink->ar.

Fix this by verifying that vdev is created for the arvif before accessing
its ar during beacon miss handling and similar vif iterator callbacks.

==========================================================================
 wlp6s0: detected beacon loss from AP (missed 7 beacons) - probing
 KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]

 CPU: 5 UID: 0 PID: 0 Comm: swapper/5 Not tainted 6.16.0-rc1-wt-ath+ #2 PREEMPT(full)
 RIP: 0010:ath12k_mac_handle_beacon_miss_iter+0xb5/0x1a0 [ath12k]
 Call Trace:
  __iterate_interfaces+0x11a/0x410 [mac80211]
  ieee80211_iterate_active_interfaces_atomic+0x61/0x140 [mac80211]
  ath12k_mac_handle_beacon_miss+0xa1/0xf0 [ath12k]
  ath12k_roam_event+0x393/0x560 [ath12k]
  ath12k_wmi_op_rx+0x1486/0x28c0 [ath12k]
  ath12k_htc_process_trailer.isra.0+0x2fb/0x620 [ath12k]
  ath12k_htc_rx_completion_handler+0x448/0x830 [ath12k]
  ath12k_ce_recv_process_cb+0x549/0x9e0 [ath12k]
  ath12k_ce_per_engine_service+0xbe/0xf0 [ath12k]
  ath12k_pci_ce_workqueue+0x69/0x120 [ath12k]
  process_one_work+0xe3a/0x1430

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c5-00284.1-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Fixes: aa80f12 ("wifi: ath12k: defer vdev creation for MLO")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250618185635.750470-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Aug 20, 2025
[ Upstream commit 5fb9042 ]

The issue was reproduced on NV10 using IGT pci_unplug test.
It is expected that `amdgpu_driver_postclose_kms()` is called prior to `amdgpu_drm_release()`.
However, the bug is that `amdgpu_fpriv` was freed in `amdgpu_driver_postclose_kms()`, and then
later accessed in `amdgpu_drm_release()` via a call to `amdgpu_userq_mgr_fini()`.
As a result, KASAN detected a use-after-free condition, as shown in the log below.
The proposed fix is to move the calls to `amdgpu_eviction_fence_destroy()` and
`amdgpu_userq_mgr_fini()` into `amdgpu_driver_postclose_kms()`, so they are invoked before
`amdgpu_fpriv` is freed.

This also ensures symmetry with the initialization path in `amdgpu_driver_open_kms()`,
where the following components are initialized:
- `amdgpu_userq_mgr_init()`
- `amdgpu_eviction_fence_init()`
- `amdgpu_ctx_mgr_init()`

Correspondingly, in `amdgpu_driver_postclose_kms()` we should clean up using:
- `amdgpu_userq_mgr_fini()`
- `amdgpu_eviction_fence_destroy()`
- `amdgpu_ctx_mgr_fini()`

This change eliminates the use-after-free and improves consistency in resource management between open and close paths.

[  +0.094367] ==================================================================
[  +0.000026] BUG: KASAN: slab-use-after-free in amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu]
[  +0.000866] Write of size 8 at addr ffff88811c068c60 by task amd_pci_unplug/1737
[  +0.000026] CPU: 3 UID: 0 PID: 1737 Comm: amd_pci_unplug Not tainted 6.14.0+ #2
[  +0.000008] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[  +0.000004] Call Trace:
[  +0.000004]  <TASK>
[  +0.000003]  dump_stack_lvl+0x76/0xa0
[  +0.000010]  print_report+0xce/0x600
[  +0.000009]  ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu]
[  +0.000790]  ? srso_return_thunk+0x5/0x5f
[  +0.000007]  ? kasan_complete_mode_report_info+0x76/0x200
[  +0.000008]  ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu]
[  +0.000684]  kasan_report+0xbe/0x110
[  +0.000007]  ? amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu]
[  +0.000601]  __asan_report_store8_noabort+0x17/0x30
[  +0.000007]  amdgpu_userq_mgr_fini+0x70c/0x730 [amdgpu]
[  +0.000801]  ? __pfx_amdgpu_userq_mgr_fini+0x10/0x10 [amdgpu]
[  +0.000819]  ? srso_return_thunk+0x5/0x5f
[  +0.000008]  amdgpu_drm_release+0xa3/0xe0 [amdgpu]
[  +0.000604]  __fput+0x354/0xa90
[  +0.000010]  __fput_sync+0x59/0x80
[  +0.000005]  __x64_sys_close+0x7d/0xe0
[  +0.000006]  x64_sys_call+0x2505/0x26f0
[  +0.000006]  do_syscall_64+0x7c/0x170
[  +0.000004]  ? kasan_record_aux_stack+0xae/0xd0
[  +0.000005]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? kmem_cache_free+0x398/0x580
[  +0.000006]  ? __fput+0x543/0xa90
[  +0.000006]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? __fput+0x543/0xa90
[  +0.000004]  ? __kasan_check_read+0x11/0x20
[  +0.000007]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? __kasan_check_read+0x11/0x20
[  +0.000003]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? fpregs_assert_state_consistent+0x21/0xb0
[  +0.000006]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? syscall_exit_to_user_mode+0x4e/0x240
[  +0.000005]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? do_syscall_64+0x88/0x170
[  +0.000003]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? do_syscall_64+0x88/0x170
[  +0.000004]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? irqentry_exit+0x43/0x50
[  +0.000004]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? exc_page_fault+0x7c/0x110
[  +0.000006]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  +0.000005] RIP: 0033:0x7ffff7b14f67
[  +0.000005] Code: ff e8 0d 16 02 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 73 ba f7 ff
[  +0.000004] RSP: 002b:00007fffffffe358 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
[  +0.000006] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffff7b14f67
[  +0.000003] RDX: 0000000000000000 RSI: 00007ffff7f5755a RDI: 0000000000000003
[  +0.000003] RBP: 00007fffffffe380 R08: 0000555555568170 R09: 0000000000000000
[  +0.000003] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fffffffe5c8
[  +0.000003] R13: 00005555555552a9 R14: 0000555555557d48 R15: 00007ffff7ffd040
[  +0.000007]  </TASK>

[  +0.000286] Allocated by task 425 on cpu 11 at 29.751192s:
[  +0.000013]  kasan_save_stack+0x28/0x60
[  +0.000008]  kasan_save_track+0x18/0x70
[  +0.000006]  kasan_save_alloc_info+0x38/0x60
[  +0.000006]  __kasan_kmalloc+0xc1/0xd0
[  +0.000005]  __kmalloc_cache_noprof+0x1bd/0x430
[  +0.000006]  amdgpu_driver_open_kms+0x172/0x760 [amdgpu]
[  +0.000521]  drm_file_alloc+0x569/0x9a0
[  +0.000008]  drm_client_init+0x1b7/0x410
[  +0.000007]  drm_fbdev_client_setup+0x174/0x470
[  +0.000007]  drm_client_setup+0x8a/0xf0
[  +0.000006]  amdgpu_pci_probe+0x50b/0x10d0 [amdgpu]
[  +0.000482]  local_pci_probe+0xe7/0x1b0
[  +0.000008]  pci_device_probe+0x5bf/0x890
[  +0.000005]  really_probe+0x1fd/0x950
[  +0.000007]  __driver_probe_device+0x307/0x410
[  +0.000005]  driver_probe_device+0x4e/0x150
[  +0.000006]  __driver_attach+0x223/0x510
[  +0.000005]  bus_for_each_dev+0x102/0x1a0
[  +0.000006]  driver_attach+0x3d/0x60
[  +0.000005]  bus_add_driver+0x309/0x650
[  +0.000005]  driver_register+0x13d/0x490
[  +0.000006]  __pci_register_driver+0x1ee/0x2b0
[  +0.000006]  xfrm_ealg_get_byidx+0x43/0x50 [xfrm_algo]
[  +0.000008]  do_one_initcall+0x9c/0x3e0
[  +0.000007]  do_init_module+0x29e/0x7f0
[  +0.000006]  load_module+0x5c75/0x7c80
[  +0.000006]  init_module_from_file+0x106/0x180
[  +0.000007]  idempotent_init_module+0x377/0x740
[  +0.000006]  __x64_sys_finit_module+0xd7/0x180
[  +0.000006]  x64_sys_call+0x1f0b/0x26f0
[  +0.000006]  do_syscall_64+0x7c/0x170
[  +0.000005]  entry_SYSCALL_64_after_hwframe+0x76/0x7e

[  +0.000013] Freed by task 1737 on cpu 9 at 76.455063s:
[  +0.000010]  kasan_save_stack+0x28/0x60
[  +0.000006]  kasan_save_track+0x18/0x70
[  +0.000005]  kasan_save_free_info+0x3b/0x60
[  +0.000006]  __kasan_slab_free+0x54/0x80
[  +0.000005]  kfree+0x127/0x470
[  +0.000006]  amdgpu_driver_postclose_kms+0x455/0x760 [amdgpu]
[  +0.000485]  drm_file_free.part.0+0x5b1/0xba0
[  +0.000007]  drm_file_free+0x13/0x30
[  +0.000006]  drm_client_release+0x1c4/0x2b0
[  +0.000006]  drm_fbdev_ttm_fb_destroy+0xd2/0x120 [drm_ttm_helper]
[  +0.000007]  put_fb_info+0x97/0xe0
[  +0.000006]  unregister_framebuffer+0x197/0x380
[  +0.000005]  drm_fb_helper_unregister_info+0x94/0x100
[  +0.000005]  drm_fbdev_client_unregister+0x3c/0x80
[  +0.000007]  drm_client_dev_unregister+0x144/0x330
[  +0.000006]  drm_dev_unregister+0x49/0x1b0
[  +0.000006]  drm_dev_unplug+0x4c/0xd0
[  +0.000006]  amdgpu_pci_remove+0x58/0x130 [amdgpu]
[  +0.000482]  pci_device_remove+0xae/0x1e0
[  +0.000006]  device_remove+0xc7/0x180
[  +0.000006]  device_release_driver_internal+0x3d4/0x5a0
[  +0.000007]  device_release_driver+0x12/0x20
[  +0.000006]  pci_stop_bus_device+0x104/0x150
[  +0.000006]  pci_stop_and_remove_bus_device_locked+0x1b/0x40
[  +0.000005]  remove_store+0xd7/0xf0
[  +0.000007]  dev_attr_store+0x3f/0x80
[  +0.000006]  sysfs_kf_write+0x125/0x1d0
[  +0.000005]  kernfs_fop_write_iter+0x2ea/0x490
[  +0.000007]  vfs_write+0x90d/0xe70
[  +0.000006]  ksys_write+0x119/0x220
[  +0.000006]  __x64_sys_write+0x72/0xc0
[  +0.000006]  x64_sys_call+0x18ab/0x26f0
[  +0.000005]  do_syscall_64+0x7c/0x170
[  +0.000005]  entry_SYSCALL_64_after_hwframe+0x76/0x7e

[  +0.000013] The buggy address belongs to the object at ffff88811c068000
               which belongs to the cache kmalloc-rnd-01-4k of size 4096
[  +0.000016] The buggy address is located 3168 bytes inside of
               freed 4096-byte region [ffff88811c068000, ffff88811c069000)

[  +0.000022] The buggy address belongs to the physical page:
[  +0.000010] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88811c06e000 pfn:0x11c068
[  +0.000006] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[  +0.000006] flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff)
[  +0.000007] page_type: f5(slab)
[  +0.000007] raw: 0017ffffc0000040 ffff88810004c140 dead000000000122 0000000000000000
[  +0.000005] raw: ffff88811c06e000 0000000080040002 00000000f5000000 0000000000000000
[  +0.000006] head: 0017ffffc0000040 ffff88810004c140 dead000000000122 0000000000000000
[  +0.000005] head: ffff88811c06e000 0000000080040002 00000000f5000000 0000000000000000
[  +0.000006] head: 0017ffffc0000003 ffffea0004701a01 ffffffffffffffff 0000000000000000
[  +0.000005] head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
[  +0.000004] page dumped because: kasan: bad access detected

[  +0.000011] Memory state around the buggy address:
[  +0.000009]  ffff88811c068b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000012]  ffff88811c068b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000011] >ffff88811c068c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000011]                                                        ^
[  +0.000010]  ffff88811c068c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000011]  ffff88811c068d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000011] ==================================================================

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Jesse Zhang <Jesse.Zhang@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>

v2: drop amdgpu_drm_release() and assign drm_release()
    as the callback directly.(Alex)

Fixes: adba092 ("drm/amdgpu: Fix Illegal opcode in command stream Error")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Aug 20, 2025
[ Upstream commit a886d26 ]

[  +0.000020] BUG: KASAN: slab-use-after-free in amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[  +0.000817] Read of size 8 at addr ffff88812eec8c58 by task amd_pci_unplug/1733

[  +0.000027] CPU: 10 UID: 0 PID: 1733 Comm: amd_pci_unplug Tainted: G        W          6.14.0+ #2
[  +0.000009] Tainted: [W]=WARN
[  +0.000003] Hardware name: ASUS System Product Name/ROG STRIX B550-F GAMING (WI-FI), BIOS 1401 12/03/2020
[  +0.000004] Call Trace:
[  +0.000004]  <TASK>
[  +0.000003]  dump_stack_lvl+0x76/0xa0
[  +0.000011]  print_report+0xce/0x600
[  +0.000009]  ? srso_return_thunk+0x5/0x5f
[  +0.000006]  ? kasan_complete_mode_report_info+0x76/0x200
[  +0.000007]  ? kasan_addr_to_slab+0xd/0xb0
[  +0.000006]  ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[  +0.000707]  kasan_report+0xbe/0x110
[  +0.000006]  ? amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[  +0.000541]  __asan_report_load8_noabort+0x14/0x30
[  +0.000005]  amdgpu_userq_suspend+0x51a/0x5a0 [amdgpu]
[  +0.000535]  ? stop_cpsch+0x396/0x600 [amdgpu]
[  +0.000556]  ? stop_cpsch+0x429/0x600 [amdgpu]
[  +0.000536]  ? __pfx_amdgpu_userq_suspend+0x10/0x10 [amdgpu]
[  +0.000536]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? kgd2kfd_suspend+0x132/0x1d0 [amdgpu]
[  +0.000542]  amdgpu_device_fini_hw+0x581/0xe90 [amdgpu]
[  +0.000485]  ? down_write+0xbb/0x140
[  +0.000007]  ? __mutex_unlock_slowpath.constprop.0+0x317/0x360
[  +0.000005]  ? __pfx_amdgpu_device_fini_hw+0x10/0x10 [amdgpu]
[  +0.000482]  ? __kasan_check_write+0x14/0x30
[  +0.000004]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? up_write+0x55/0xb0
[  +0.000007]  ? srso_return_thunk+0x5/0x5f
[  +0.000005]  ? blocking_notifier_chain_unregister+0x6c/0xc0
[  +0.000008]  amdgpu_driver_unload_kms+0x69/0x90 [amdgpu]
[  +0.000484]  amdgpu_pci_remove+0x93/0x130 [amdgpu]
[  +0.000482]  pci_device_remove+0xae/0x1e0
[  +0.000008]  device_remove+0xc7/0x180
[  +0.000008]  device_release_driver_internal+0x3d4/0x5a0
[  +0.000007]  device_release_driver+0x12/0x20
[  +0.000004]  pci_stop_bus_device+0x104/0x150
[  +0.000006]  pci_stop_and_remove_bus_device_locked+0x1b/0x40
[  +0.000005]  remove_store+0xd7/0xf0
[  +0.000005]  ? __pfx_remove_store+0x10/0x10
[  +0.000006]  ? __pfx__copy_from_iter+0x10/0x10
[  +0.000006]  ? __pfx_dev_attr_store+0x10/0x10
[  +0.000006]  dev_attr_store+0x3f/0x80
[  +0.000006]  sysfs_kf_write+0x125/0x1d0
[  +0.000004]  ? srso_return_thunk+0x5/0x5f
[  +0.000005]  ? __kasan_check_write+0x14/0x30
[  +0.000005]  kernfs_fop_write_iter+0x2ea/0x490
[  +0.000005]  ? rw_verify_area+0x70/0x420
[  +0.000005]  ? __pfx_kernfs_fop_write_iter+0x10/0x10
[  +0.000006]  vfs_write+0x90d/0xe70
[  +0.000005]  ? srso_return_thunk+0x5/0x5f
[  +0.000005]  ? __pfx_vfs_write+0x10/0x10
[  +0.000004]  ? local_clock+0x15/0x30
[  +0.000008]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? __kasan_slab_free+0x5f/0x80
[  +0.000005]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? __kasan_check_read+0x11/0x20
[  +0.000004]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? fdget_pos+0x1d3/0x500
[  +0.000007]  ksys_write+0x119/0x220
[  +0.000005]  ? putname+0x1c/0x30
[  +0.000006]  ? __pfx_ksys_write+0x10/0x10
[  +0.000007]  __x64_sys_write+0x72/0xc0
[  +0.000006]  x64_sys_call+0x18ab/0x26f0
[  +0.000006]  do_syscall_64+0x7c/0x170
[  +0.000004]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? __pfx___x64_sys_openat+0x10/0x10
[  +0.000006]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? __kasan_check_read+0x11/0x20
[  +0.000003]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? fpregs_assert_state_consistent+0x21/0xb0
[  +0.000006]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? syscall_exit_to_user_mode+0x4e/0x240
[  +0.000005]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? do_syscall_64+0x88/0x170
[  +0.000003]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? irqentry_exit+0x43/0x50
[  +0.000004]  ? srso_return_thunk+0x5/0x5f
[  +0.000004]  ? exc_page_fault+0x7c/0x110
[  +0.000006]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  +0.000006] RIP: 0033:0x7480c0b14887
[  +0.000005] Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[  +0.000005] RSP: 002b:00007fff142b0058 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  +0.000006] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007480c0b14887
[  +0.000003] RDX: 0000000000000001 RSI: 00007480c0e7365a RDI: 0000000000000004
[  +0.000003] RBP: 00007fff142b0080 R08: 0000563b2e73c170 R09: 0000000000000000
[  +0.000003] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff142b02f8
[  +0.000003] R13: 0000563b159a72a9 R14: 0000563b159a9d48 R15: 00007480c0f19040
[  +0.000008]  </TASK>

[  +0.000445] Allocated by task 427 on cpu 5 at 29.342331s:
[  +0.000011]  kasan_save_stack+0x28/0x60
[  +0.000006]  kasan_save_track+0x18/0x70
[  +0.000006]  kasan_save_alloc_info+0x38/0x60
[  +0.000005]  __kasan_kmalloc+0xc1/0xd0
[  +0.000006]  __kmalloc_cache_noprof+0x1bd/0x430
[  +0.000007]  amdgpu_driver_open_kms+0x172/0x760 [amdgpu]
[  +0.000493]  drm_file_alloc+0x569/0x9a0
[  +0.000007]  drm_client_init+0x1b7/0x410
[  +0.000007]  drm_fbdev_client_setup+0x174/0x470
[  +0.000006]  drm_client_setup+0x8a/0xf0
[  +0.000006]  amdgpu_pci_probe+0x510/0x10c0 [amdgpu]
[  +0.000483]  local_pci_probe+0xe7/0x1b0
[  +0.000006]  pci_device_probe+0x5bf/0x890
[  +0.000006]  really_probe+0x1fd/0x950
[  +0.000005]  __driver_probe_device+0x307/0x410
[  +0.000006]  driver_probe_device+0x4e/0x150
[  +0.000005]  __driver_attach+0x223/0x510
[  +0.000006]  bus_for_each_dev+0x102/0x1a0
[  +0.000005]  driver_attach+0x3d/0x60
[  +0.000006]  bus_add_driver+0x309/0x650
[  +0.000005]  driver_register+0x13d/0x490
[  +0.000006]  __pci_register_driver+0x1ee/0x2b0
[  +0.000006]  rfcomm_dlc_clear_state+0x69/0x220 [rfcomm]
[  +0.000011]  do_one_initcall+0x9c/0x3e0
[  +0.000007]  do_init_module+0x29e/0x7f0
[  +0.000006]  load_module+0x5c75/0x7c80
[  +0.000006]  init_module_from_file+0x106/0x180
[  +0.000006]  idempotent_init_module+0x377/0x740
[  +0.000006]  __x64_sys_finit_module+0xd7/0x180
[  +0.000006]  x64_sys_call+0x1f0b/0x26f0
[  +0.000006]  do_syscall_64+0x7c/0x170
[  +0.000005]  entry_SYSCALL_64_after_hwframe+0x76/0x7e

[  +0.000013] Freed by task 1733 on cpu 5 at 59.907086s:
[  +0.000011]  kasan_save_stack+0x28/0x60
[  +0.000006]  kasan_save_track+0x18/0x70
[  +0.000005]  kasan_save_free_info+0x3b/0x60
[  +0.000005]  __kasan_slab_free+0x54/0x80
[  +0.000006]  kfree+0x127/0x470
[  +0.000006]  amdgpu_driver_postclose_kms+0x455/0x760 [amdgpu]
[  +0.000493]  drm_file_free.part.0+0x5b1/0xba0
[  +0.000006]  drm_file_free+0x13/0x30
[  +0.000006]  drm_client_release+0x1c4/0x2b0
[  +0.000006]  drm_fbdev_ttm_fb_destroy+0xd2/0x120 [drm_ttm_helper]
[  +0.000007]  put_fb_info+0x97/0xe0
[  +0.000007]  unregister_framebuffer+0x197/0x380
[  +0.000005]  drm_fb_helper_unregister_info+0x94/0x100
[  +0.000005]  drm_fbdev_client_unregister+0x3c/0x80
[  +0.000007]  drm_client_dev_unregister+0x144/0x330
[  +0.000006]  drm_dev_unregister+0x49/0x1b0
[  +0.000006]  drm_dev_unplug+0x4c/0xd0
[  +0.000006]  amdgpu_pci_remove+0x58/0x130 [amdgpu]
[  +0.000484]  pci_device_remove+0xae/0x1e0
[  +0.000008]  device_remove+0xc7/0x180
[  +0.000007]  device_release_driver_internal+0x3d4/0x5a0
[  +0.000006]  device_release_driver+0x12/0x20
[  +0.000007]  pci_stop_bus_device+0x104/0x150
[  +0.000006]  pci_stop_and_remove_bus_device_locked+0x1b/0x40
[  +0.000006]  remove_store+0xd7/0xf0
[  +0.000006]  dev_attr_store+0x3f/0x80
[  +0.000005]  sysfs_kf_write+0x125/0x1d0
[  +0.000006]  kernfs_fop_write_iter+0x2ea/0x490
[  +0.000006]  vfs_write+0x90d/0xe70
[  +0.000006]  ksys_write+0x119/0x220
[  +0.000006]  __x64_sys_write+0x72/0xc0
[  +0.000006]  x64_sys_call+0x18ab/0x26f0
[  +0.000005]  do_syscall_64+0x7c/0x170
[  +0.000006]  entry_SYSCALL_64_after_hwframe+0x76/0x7e

[  +0.000012] The buggy address belongs to the object at ffff88812eec8000
               which belongs to the cache kmalloc-rnd-07-4k of size 4096
[  +0.000016] The buggy address is located 3160 bytes inside of
               freed 4096-byte region [ffff88812eec8000, ffff88812eec9000)

[  +0.000023] The buggy address belongs to the physical page:
[  +0.000009] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12eec8
[  +0.000007] head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[  +0.000005] flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff)
[  +0.000007] page_type: f5(slab)
[  +0.000008] raw: 0017ffffc0000040 ffff888100054500 dead000000000122 0000000000000000
[  +0.000005] raw: 0000000000000000 0000000080040004 00000000f5000000 0000000000000000
[  +0.000006] head: 0017ffffc0000040 ffff888100054500 dead000000000122 0000000000000000
[  +0.000005] head: 0000000000000000 0000000080040004 00000000f5000000 0000000000000000
[  +0.000006] head: 0017ffffc0000003 ffffea0004bbb201 ffffffffffffffff 0000000000000000
[  +0.000005] head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000
[  +0.000005] page dumped because: kasan: bad access detected

[  +0.000010] Memory state around the buggy address:
[  +0.000009]  ffff88812eec8b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000012]  ffff88812eec8b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000011] >ffff88812eec8c00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000011]                                                     ^
[  +0.000010]  ffff88812eec8c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000011]  ffff88812eec8d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  +0.000011] ==================================================================

The use-after-free occurs because a delayed work item (`suspend_work`) may still
be pending or running when resources it accesses are freed during device removal
or file close. The previous code used `flush_work(&fpriv->evf_mgr.suspend_work.work)`,
which does not wait for delayed work that has not yet started. As a result, the
delayed work could run after its memory was freed, causing a use-after-free.
By switching to `flush_delayed_work(&fpriv->evf_mgr.suspend_work)`, we ensure that
the kernel waits for both queued and delayed work to finish before
freeing memory, closing this race.

Fixes: adba092 ("drm/amdgpu: Fix Illegal opcode in command stream Error")
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Aug 20, 2025
[ Upstream commit 17ce3e5 ]

syzbot reported that the netfilter bpf prog can be called without
migration disabled in xmit path.

Then the assertion in __bpf_prog_run() fails, triggering the splat
below. [0]

Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf().

[0]:
BUG: assuming non migratable context at ./include/linux/filter.h:703
in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session
3 locks held by sshd-session/5829:
 #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline]
 #0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395
 #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
 #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
 #1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470
 #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
 #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
 #2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241
CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
 __cant_migrate kernel/sched/core.c:8860 [inline]
 __cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834
 __bpf_prog_run include/linux/filter.h:703 [inline]
 bpf_prog_run include/linux/filter.h:725 [inline]
 nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20
 nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
 nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623
 nf_hook+0x370/0x680 include/linux/netfilter.h:272
 NF_HOOK_COND include/linux/netfilter.h:305 [inline]
 ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433
 dst_output include/net/dst.h:459 [inline]
 ip_local_out net/ipv4/ip_output.c:129 [inline]
 __ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527
 __tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479
 tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline]
 tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838
 __tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021
 tcp_push+0x225/0x700 net/ipv4/tcp.c:759
 tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359
 tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396
 inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851
 sock_sendmsg_nosec net/socket.c:712 [inline]
 __sock_sendmsg net/socket.c:727 [inline]
 sock_write_iter+0x4aa/0x5b0 net/socket.c:1131
 new_sync_write fs/read_write.c:593 [inline]
 vfs_write+0x6c7/0x1150 fs/read_write.c:686
 ksys_write+0x1f8/0x250 fs/read_write.c:738
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe7d365d407
Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP:

Fixes: fd9c663 ("bpf: minimal support for programs hooked into netfilter framework")
Reported-by: syzbot+40f772d37250b6d10efc@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6879466d.a00a0220.3af5df.0022.GAE@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Tested-by: syzbot+40f772d37250b6d10efc@syzkaller.appspotmail.com
Acked-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250722224041.112292-1-kuniyu@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Aug 20, 2025
[ Upstream commit 4668619 ]

When the root of a nested PCIe bridge configuration is unplugged, the
pnv_php driver leaked the allocated IRQ resources for the child bridges'
hotplug event notifications, resulting in a panic.

Fix this by walking all child buses and deallocating all its IRQ resources
before calling pci_hp_remove_devices().

Also modify the lifetime of the workqueue at struct pnv_php_slot::wq so
that it is only destroyed in pnv_php_free_slot(), instead of
pnv_php_disable_irq(). This is required since pnv_php_disable_irq() will
now be called by workers triggered by hot unplug interrupts, so the
workqueue needs to stay allocated.

The abridged kernel panic that occurs without this patch is as follows:

  WARNING: CPU: 0 PID: 687 at kernel/irq/msi.c:292 msi_device_data_release+0x6c/0x9c
  CPU: 0 UID: 0 PID: 687 Comm: bash Not tainted 6.14.0-rc5+ #2
  Call Trace:
   msi_device_data_release+0x34/0x9c (unreliable)
   release_nodes+0x64/0x13c
   devres_release_all+0xc0/0x140
   device_del+0x2d4/0x46c
   pci_destroy_dev+0x5c/0x194
   pci_hp_remove_devices+0x90/0x128
   pci_hp_remove_devices+0x44/0x128
   pnv_php_disable_slot+0x54/0xd4
   power_write_file+0xf8/0x18c
   pci_slot_attr_store+0x40/0x5c
   sysfs_kf_write+0x64/0x78
   kernfs_fop_write_iter+0x1b0/0x290
   vfs_write+0x3bc/0x50c
   ksys_write+0x84/0x140
   system_call_exception+0x124/0x230
   system_call_vectored_common+0x15c/0x2ec

Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
[bhelgaas: tidy comments]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/2013845045.1359852.1752615367790.JavaMail.zimbra@raptorengineeringinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Aug 20, 2025
commit 17ec2f9 upstream.

Let the guest set DEBUGCTL.RTM_DEBUG if RTM is supported according to the
guest CPUID model, as debug support is supposed to be available if RTM is
supported, and there are no known downsides to letting the guest debug RTM
aborts.

Note, there are no known bug reports related to RTM_DEBUG, the primary
motivation is to reduce the probability of breaking existing guests when a
future change adds a missing consistency check on vmcs12.GUEST_DEBUGCTL
(KVM currently lets L2 run with whatever hardware supports; whoops).

Note #2, KVM already emulates DR6.RTM, and doesn't restrict access to
DR7.RTM.

Fixes: 83c5291 ("KVM: x86: expose Intel cpu new features (HLE, RTM) to guest")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250610232010.162191-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Aug 24, 2025
commit 7d34ec3 upstream.

With KASAN enabled, it is possible to get a slab out of bounds
during mount to ksmbd due to missing check in parse_server_interfaces()
(see below):

 BUG: KASAN: slab-out-of-bounds in
 parse_server_interfaces+0x14ee/0x1880 [cifs]
 Read of size 4 at addr ffff8881433dba98 by task mount/9827

 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G
 OE       6.16.0-rc2-kasan #2 PREEMPT(voluntary)
 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
 Hardware name: Dell Inc. Precision Tower 3620/0MWYPT,
 BIOS 2.13.1 06/14/2019
 Call Trace:
  <TASK>
 dump_stack_lvl+0x9f/0xf0
 print_report+0xd1/0x670
 __virt_addr_valid+0x22c/0x430
 ? parse_server_interfaces+0x14ee/0x1880 [cifs]
 ? kasan_complete_mode_report_info+0x2a/0x1f0
 ? parse_server_interfaces+0x14ee/0x1880 [cifs]
   kasan_report+0xd6/0x110
   parse_server_interfaces+0x14ee/0x1880 [cifs]
   __asan_report_load_n_noabort+0x13/0x20
   parse_server_interfaces+0x14ee/0x1880 [cifs]
 ? __pfx_parse_server_interfaces+0x10/0x10 [cifs]
 ? trace_hardirqs_on+0x51/0x60
 SMB3_request_interfaces+0x1ad/0x3f0 [cifs]
 ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs]
 ? SMB2_tcon+0x23c/0x15d0 [cifs]
 smb3_qfs_tcon+0x173/0x2b0 [cifs]
 ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
 ? cifs_get_tcon+0x105d/0x2120 [cifs]
 ? do_raw_spin_unlock+0x5d/0x200
 ? cifs_get_tcon+0x105d/0x2120 [cifs]
 ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
 cifs_mount_get_tcon+0x369/0xb90 [cifs]
 ? dfs_cache_find+0xe7/0x150 [cifs]
 dfs_mount_share+0x985/0x2970 [cifs]
 ? check_path.constprop.0+0x28/0x50
 ? save_trace+0x54/0x370
 ? __pfx_dfs_mount_share+0x10/0x10 [cifs]
 ? __lock_acquire+0xb82/0x2ba0
 ? __kasan_check_write+0x18/0x20
 cifs_mount+0xbc/0x9e0 [cifs]
 ? __pfx_cifs_mount+0x10/0x10 [cifs]
 ? do_raw_spin_unlock+0x5d/0x200
 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs]
 cifs_smb3_do_mount+0x263/0x1990 [cifs]

Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Aug 25, 2025
With KASAN enabled, it is possible to get a slab out of bounds
during mount to ksmbd due to missing check in parse_server_interfaces()
(see below):

 BUG: KASAN: slab-out-of-bounds in
 parse_server_interfaces+0x14ee/0x1880 [cifs]
 Read of size 4 at addr ffff8881433dba98 by task mount/9827

 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G
 OE       6.16.0-rc2-kasan #2 PREEMPT(voluntary)
 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
 Hardware name: Dell Inc. Precision Tower 3620/0MWYPT,
 BIOS 2.13.1 06/14/2019
 Call Trace:
  <TASK>
 dump_stack_lvl+0x9f/0xf0
 print_report+0xd1/0x670
 __virt_addr_valid+0x22c/0x430
 ? parse_server_interfaces+0x14ee/0x1880 [cifs]
 ? kasan_complete_mode_report_info+0x2a/0x1f0
 ? parse_server_interfaces+0x14ee/0x1880 [cifs]
   kasan_report+0xd6/0x110
   parse_server_interfaces+0x14ee/0x1880 [cifs]
   __asan_report_load_n_noabort+0x13/0x20
   parse_server_interfaces+0x14ee/0x1880 [cifs]
 ? __pfx_parse_server_interfaces+0x10/0x10 [cifs]
 ? trace_hardirqs_on+0x51/0x60
 SMB3_request_interfaces+0x1ad/0x3f0 [cifs]
 ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs]
 ? SMB2_tcon+0x23c/0x15d0 [cifs]
 smb3_qfs_tcon+0x173/0x2b0 [cifs]
 ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
 ? cifs_get_tcon+0x105d/0x2120 [cifs]
 ? do_raw_spin_unlock+0x5d/0x200
 ? cifs_get_tcon+0x105d/0x2120 [cifs]
 ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
 cifs_mount_get_tcon+0x369/0xb90 [cifs]
 ? dfs_cache_find+0xe7/0x150 [cifs]
 dfs_mount_share+0x985/0x2970 [cifs]
 ? check_path.constprop.0+0x28/0x50
 ? save_trace+0x54/0x370
 ? __pfx_dfs_mount_share+0x10/0x10 [cifs]
 ? __lock_acquire+0xb82/0x2ba0
 ? __kasan_check_write+0x18/0x20
 cifs_mount+0xbc/0x9e0 [cifs]
 ? __pfx_cifs_mount+0x10/0x10 [cifs]
 ? do_raw_spin_unlock+0x5d/0x200
 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs]
 cifs_smb3_do_mount+0x263/0x1990 [cifs]

Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
chewitt pushed a commit that referenced this pull request Aug 25, 2025
The commit under the Fixes tag added a netdev_assert_locked() in
bnxt_free_ntp_fltrs().  The lock should be held during normal run-time
but the assert will be triggered (see below) during bnxt_remove_one()
which should not need the lock.  The netdev is already unregistered by
then.  Fix it by calling netdev_assert_locked_or_invisible() which will
not assert if the netdev is unregistered.

WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re]
CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S      W           6.16.0 #2 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa92082387da0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf
RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3
R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001
R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100
FS:  00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0
Call Trace:
 <TASK>
 bnxt_remove_one+0x57/0x180 [bnxt_en]
 pci_device_remove+0x39/0xc0
 device_release_driver_internal+0xa5/0x130
 driver_detach+0x42/0x90
 bus_remove_driver+0x61/0xc0
 pci_unregister_driver+0x38/0x90
 bnxt_exit+0xc/0x7d0 [bnxt_en]

Fixes: 004b500 ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chewitt pushed a commit that referenced this pull request Aug 25, 2025
Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced an IRQ lock inversion
issue. Fix this lock inversion by changing the spin_lock_irq() calls into
spin_lock_irqsave() calls in code that can be called either from
interrupt context or from thread context. This patch fixes the following
lockdep complaint:

WARNING: possible irq lock inversion dependency detected
6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G        W  OE
--------------------------------------------------------
kworker/u28:0/12 just changed the state of lock:
ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110
but this lock took another, HARDIRQ-unsafe lock in the past:
 (shost->host_lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(shost->host_lock);
                               local_irq_disable();
                               lock(&hba->clk_gating.lock);
                               lock(shost->host_lock);
  <Interrupt>
    lock(&hba->clk_gating.lock);

 *** DEADLOCK ***

4 locks held by kworker/u28:0/12:
 #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
 #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
 #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120
 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104

the shortest dependencies between 2nd lock and 1st lock:
 -> (shost->host_lock){+.+.}-{2:2} {
    HARDIRQ-ON-W at:
                      lock_acquire+0x134/0x2b4
                      _raw_spin_lock+0x48/0x64
                      ufshcd_sl_intr+0x4c/0xa08
                      ufshcd_threaded_intr+0x70/0x12c
                      irq_thread_fn+0x48/0xa8
                      irq_thread+0x130/0x1ec
                      kthread+0x110/0x134
                      ret_from_fork+0x10/0x20
    SOFTIRQ-ON-W at:
                      lock_acquire+0x134/0x2b4
                      _raw_spin_lock+0x48/0x64
                      ufshcd_sl_intr+0x4c/0xa08
                      ufshcd_threaded_intr+0x70/0x12c
                      irq_thread_fn+0x48/0xa8
                      irq_thread+0x130/0x1ec
                      kthread+0x110/0x134
                      ret_from_fork+0x10/0x20
    INITIAL USE at:
                     lock_acquire+0x134/0x2b4
                     _raw_spin_lock+0x48/0x64
                     ufshcd_sl_intr+0x4c/0xa08
                     ufshcd_threaded_intr+0x70/0x12c
                     irq_thread_fn+0x48/0xa8
                     irq_thread+0x130/0x1ec
                     kthread+0x110/0x134
                     ret_from_fork+0x10/0x20
  }
  ... key      at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10
  ... acquired at:
   _raw_spin_lock_irqsave+0x5c/0x80
   __ufshcd_release+0x78/0x118
   ufshcd_send_uic_cmd+0xe4/0x118
   ufshcd_dme_set_attr+0x88/0x1c8
   ufs_google_phy_initialization+0x68/0x418 [ufs]
   ufs_google_link_startup_notify+0x78/0x27c [ufs]
   ufshcd_link_startup+0x84/0x720
   ufshcd_init+0xf3c/0x1330
   ufshcd_pltfrm_init+0x728/0x7d8
   ufs_google_probe+0x30/0x84 [ufs]
   platform_probe+0xa0/0xe0
   really_probe+0x114/0x454
   __driver_probe_device+0xa4/0x160
   driver_probe_device+0x44/0x23c
   __driver_attach_async_helper+0x60/0xd4
   async_run_entry_fn+0x4c/0x17c
   process_one_work+0x26c/0x65c
   worker_thread+0x33c/0x498
   kthread+0x110/0x134
   ret_from_fork+0x10/0x20

-> (&hba->clk_gating.lock){-...}-{2:2} {
   IN-HARDIRQ-W at:
                    lock_acquire+0x134/0x2b4
                    _raw_spin_lock_irqsave+0x5c/0x80
                    ufshcd_release_scsi_cmd+0x60/0x110
                    ufshcd_compl_one_cqe+0x2c0/0x3f4
                    ufshcd_mcq_poll_cqe_lock+0xb0/0x104
                    ufs_google_mcq_intr+0x80/0xa0 [ufs]
                    __handle_irq_event_percpu+0x104/0x32c
                    handle_irq_event+0x40/0x9c
                    handle_fasteoi_irq+0x170/0x2e8
                    generic_handle_domain_irq+0x58/0x80
                    gic_handle_irq+0x48/0x104
                    call_on_irq_stack+0x3c/0x50
                    do_interrupt_handler+0x7c/0xd8
                    el1_interrupt+0x34/0x58
                    el1h_64_irq_handler+0x18/0x24
                    el1h_64_irq+0x68/0x6c
                    _raw_spin_unlock_irqrestore+0x3c/0x6c
                    debug_object_assert_init+0x16c/0x21c
                    __mod_timer+0x4c/0x48c
                    schedule_timeout+0xd4/0x16c
                    io_schedule_timeout+0x48/0x70
                    do_wait_for_common+0x100/0x194
                    wait_for_completion_io_timeout+0x48/0x6c
                    blk_execute_rq+0x124/0x17c
                    scsi_execute_cmd+0x18c/0x3f8
                    scsi_probe_and_add_lun+0x204/0xd74
                    __scsi_add_device+0xbc/0x120
                    ufshcd_async_scan+0x80/0x3c0
                    async_run_entry_fn+0x4c/0x17c
                    process_one_work+0x26c/0x65c
                    worker_thread+0x33c/0x498
                    kthread+0x110/0x134
                    ret_from_fork+0x10/0x20
   INITIAL USE at:
                   lock_acquire+0x134/0x2b4
                   _raw_spin_lock_irqsave+0x5c/0x80
                   ufshcd_hold+0x34/0x14c
                   ufshcd_send_uic_cmd+0x28/0x118
                   ufshcd_dme_set_attr+0x88/0x1c8
                   ufs_google_phy_initialization+0x68/0x418 [ufs]
                   ufs_google_link_startup_notify+0x78/0x27c [ufs]
                   ufshcd_link_startup+0x84/0x720
                   ufshcd_init+0xf3c/0x1330
                   ufshcd_pltfrm_init+0x728/0x7d8
                   ufs_google_probe+0x30/0x84 [ufs]
                   platform_probe+0xa0/0xe0
                   really_probe+0x114/0x454
                   __driver_probe_device+0xa4/0x160
                   driver_probe_device+0x44/0x23c
                   __driver_attach_async_helper+0x60/0xd4
                   async_run_entry_fn+0x4c/0x17c
                   process_one_work+0x26c/0x65c
                   worker_thread+0x33c/0x498
                   kthread+0x110/0x134
                   ret_from_fork+0x10/0x20
 }
 ... key      at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10
 ... acquired at:
   mark_lock+0x1c4/0x224
   __lock_acquire+0x438/0x2e1c
   lock_acquire+0x134/0x2b4
   _raw_spin_lock_irqsave+0x5c/0x80
   ufshcd_release_scsi_cmd+0x60/0x110
   ufshcd_compl_one_cqe+0x2c0/0x3f4
   ufshcd_mcq_poll_cqe_lock+0xb0/0x104
   ufs_google_mcq_intr+0x80/0xa0 [ufs]
   __handle_irq_event_percpu+0x104/0x32c
   handle_irq_event+0x40/0x9c
   handle_fasteoi_irq+0x170/0x2e8
   generic_handle_domain_irq+0x58/0x80
   gic_handle_irq+0x48/0x104
   call_on_irq_stack+0x3c/0x50
   do_interrupt_handler+0x7c/0xd8
   el1_interrupt+0x34/0x58
   el1h_64_irq_handler+0x18/0x24
   el1h_64_irq+0x68/0x6c
   _raw_spin_unlock_irqrestore+0x3c/0x6c
   debug_object_assert_init+0x16c/0x21c
   __mod_timer+0x4c/0x48c
   schedule_timeout+0xd4/0x16c
   io_schedule_timeout+0x48/0x70
   do_wait_for_common+0x100/0x194
   wait_for_completion_io_timeout+0x48/0x6c
   blk_execute_rq+0x124/0x17c
   scsi_execute_cmd+0x18c/0x3f8
   scsi_probe_and_add_lun+0x204/0xd74
   __scsi_add_device+0xbc/0x120
   ufshcd_async_scan+0x80/0x3c0
   async_run_entry_fn+0x4c/0x17c
   process_one_work+0x26c/0x65c
   worker_thread+0x33c/0x498
   kthread+0x110/0x134
   ret_from_fork+0x10/0x20

stack backtrace:
CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G        W  OE      6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: async async_run_entry_fn
Call trace:
 dump_backtrace+0xfc/0x17c
 show_stack+0x18/0x28
 dump_stack_lvl+0x40/0xa0
 dump_stack+0x18/0x24
 print_irq_inversion_bug+0x2fc/0x304
 mark_lock_irq+0x388/0x4fc
 mark_lock+0x1c4/0x224
 __lock_acquire+0x438/0x2e1c
 lock_acquire+0x134/0x2b4
 _raw_spin_lock_irqsave+0x5c/0x80
 ufshcd_release_scsi_cmd+0x60/0x110
 ufshcd_compl_one_cqe+0x2c0/0x3f4
 ufshcd_mcq_poll_cqe_lock+0xb0/0x104
 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a]
 __handle_irq_event_percpu+0x104/0x32c
 handle_irq_event+0x40/0x9c
 handle_fasteoi_irq+0x170/0x2e8
 generic_handle_domain_irq+0x58/0x80
 gic_handle_irq+0x48/0x104
 call_on_irq_stack+0x3c/0x50
 do_interrupt_handler+0x7c/0xd8
 el1_interrupt+0x34/0x58
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x68/0x6c
 _raw_spin_unlock_irqrestore+0x3c/0x6c
 debug_object_assert_init+0x16c/0x21c
 __mod_timer+0x4c/0x48c
 schedule_timeout+0xd4/0x16c
 io_schedule_timeout+0x48/0x70
 do_wait_for_common+0x100/0x194
 wait_for_completion_io_timeout+0x48/0x6c
 blk_execute_rq+0x124/0x17c
 scsi_execute_cmd+0x18c/0x3f8
 scsi_probe_and_add_lun+0x204/0xd74
 __scsi_add_device+0xbc/0x120
 ufshcd_async_scan+0x80/0x3c0
 async_run_entry_fn+0x4c/0x17c
 process_one_work+0x26c/0x65c
 worker_thread+0x33c/0x498
 kthread+0x110/0x134
 ret_from_fork+0x10/0x20

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
chewitt pushed a commit that referenced this pull request Aug 25, 2025
…dlock

When a user creates a dualpi2 qdisc it automatically sets a timer. This
timer will run constantly and update the qdisc's probability field.
The issue is that the timer acquires the qdisc root lock and runs in
hardirq. The qdisc root lock is also acquired in dev.c whenever a packet
arrives for this qdisc. Since the dualpi2 timer callback runs in hardirq,
it may interrupt the packet processing running in softirq. If that happens
and it runs on the same CPU, it will acquire the same lock and cause a
deadlock. The following splat shows up when running a kernel compiled with
lock debugging:

[  +0.000224] WARNING: inconsistent lock state
[  +0.000224] 6.16.0+ #10 Not tainted
[  +0.000169] --------------------------------
[  +0.000029] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[  +0.000000] ping/156 [HC0[0]:SC0[2]:HE1:SE0] takes:
[  +0.000000] ffff897841242110 (&sch->root_lock_key){?.-.}-{3:3}, at: __dev_queue_xmit+0x86d/0x1140
[  +0.000000] {IN-HARDIRQ-W} state was registered at:
[  +0.000000]   lock_acquire.part.0+0xb6/0x220
[  +0.000000]   _raw_spin_lock+0x31/0x80
[  +0.000000]   dualpi2_timer+0x6f/0x270
[  +0.000000]   __hrtimer_run_queues+0x1c5/0x360
[  +0.000000]   hrtimer_interrupt+0x115/0x260
[  +0.000000]   __sysvec_apic_timer_interrupt+0x6d/0x1a0
[  +0.000000]   sysvec_apic_timer_interrupt+0x6e/0x80
[  +0.000000]   asm_sysvec_apic_timer_interrupt+0x1a/0x20
[  +0.000000]   pv_native_safe_halt+0xf/0x20
[  +0.000000]   default_idle+0x9/0x10
[  +0.000000]   default_idle_call+0x7e/0x1e0
[  +0.000000]   do_idle+0x1e8/0x250
[  +0.000000]   cpu_startup_entry+0x29/0x30
[  +0.000000]   rest_init+0x151/0x160
[  +0.000000]   start_kernel+0x6f3/0x700
[  +0.000000]   x86_64_start_reservations+0x24/0x30
[  +0.000000]   x86_64_start_kernel+0xc8/0xd0
[  +0.000000]   common_startup_64+0x13e/0x148
[  +0.000000] irq event stamp: 6884
[  +0.000000] hardirqs last  enabled at (6883): [<ffffffffa75700b3>] neigh_resolve_output+0x223/0x270
[  +0.000000] hardirqs last disabled at (6882): [<ffffffffa7570078>] neigh_resolve_output+0x1e8/0x270
[  +0.000000] softirqs last  enabled at (6880): [<ffffffffa757006b>] neigh_resolve_output+0x1db/0x270
[  +0.000000] softirqs last disabled at (6884): [<ffffffffa755b533>] __dev_queue_xmit+0x73/0x1140
[  +0.000000]
              other info that might help us debug this:
[  +0.000000]  Possible unsafe locking scenario:

[  +0.000000]        CPU0
[  +0.000000]        ----
[  +0.000000]   lock(&sch->root_lock_key);
[  +0.000000]   <Interrupt>
[  +0.000000]     lock(&sch->root_lock_key);
[  +0.000000]
               *** DEADLOCK ***

[  +0.000000] 4 locks held by ping/156:
[  +0.000000]  #0: ffff897842332e08 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x41e/0xf40
[  +0.000000]  #1: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_output+0x2c/0x190
[  +0.000000]  #2: ffffffffa816f880 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0xad/0x950
[  +0.000000]  #3: ffffffffa816f840 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x73/0x1140

I am able to reproduce it consistently when running the following:

tc qdisc add dev lo handle 1: root dualpi2
ping -f 127.0.0.1

To fix it, make the timer run in softirq.

Fixes: 320d031 ("sched: Struct definition and parsing of dualpi2 qdisc")
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250815135317.664993-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 1, 2025
In gicv5_irs_of_init_affinity() a WARN_ON() is triggered if:

 1) a phandle in the "cpus" property does not correspond to a valid OF
    node
 2  a CPU logical id does not exist for a given OF cpu_node

#1 is a firmware bug and should be reported as such but does not warrant a
   WARN_ON() backtrace.

#2 is not necessarily an error condition (eg a kernel can be booted with
   nr_cpus=X limiting the number of cores artificially) and therefore there
   is no reason to clutter the kernel log with WARN_ON() output when the
   condition is hit.

Rework the IRS affinity parsing code to remove undue WARN_ON()s thus
making it less noisy.

Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250814094138.1611017-1-lpieralisi@kernel.org
chewitt pushed a commit that referenced this pull request Sep 1, 2025
With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads
to the following splat:

[  250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0
[  250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0
[  250.218775] Modules linked in: hfcpci(-) mISDN_core
[  250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary)
[  250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[  250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0
[  250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d
[  250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286
[  250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95
[  250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0
[  250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39
[  250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001
[  250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8
[  250.232454] FS:  00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000
[  250.233851] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0
[  250.236117] Call Trace:
[  250.236599]  <TASK>
[  250.236967]  ? trace_irq_enable.constprop.0+0xd4/0x130
[  250.237920]  debug_object_assert_init+0x1f6/0x310
[  250.238762]  ? __pfx_debug_object_assert_init+0x10/0x10
[  250.239658]  ? __lock_acquire+0xdea/0x1c70
[  250.240369]  __try_to_del_timer_sync+0x69/0x140
[  250.241172]  ? __pfx___try_to_del_timer_sync+0x10/0x10
[  250.242058]  ? __timer_delete_sync+0xc6/0x120
[  250.242842]  ? lock_acquire+0x30/0x80
[  250.243474]  ? __timer_delete_sync+0xc6/0x120
[  250.244262]  __timer_delete_sync+0x98/0x120
[  250.245015]  HFC_cleanup+0x10/0x20 [hfcpci]
[  250.245704]  __do_sys_delete_module+0x348/0x510
[  250.246461]  ? __pfx___do_sys_delete_module+0x10/0x10
[  250.247338]  do_syscall_64+0xc1/0x360
[  250.247924]  entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fix this by initializing hfc_tl timer with DEFINE_TIMER macro.
Also, use mod_timer instead of manual timeout update.

Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci")
Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq")
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 1, 2025
These iterations require the read lock, otherwise RCU
lockdep will splat:

=============================
WARNING: suspicious RCU usage
6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G           O
-----------------------------
drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/547:
 #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a
 #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b
 #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b
 #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b
 #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98

stack backtrace:
CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G           O        6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY
Tainted: [O]=OOT_MODULE
Stack:
 223721b3a80 6089eac6 00000001 00000001
 ffffff00 6089eac6 00000535 6086e528
 721b3ac0 6003c294 00000000 60031fc0
Call Trace:
 [<600407ed>] show_stack+0x10e/0x127
 [<6003c294>] dump_stack_lvl+0x77/0xc6
 [<6003c2fd>] dump_stack+0x1a/0x20
 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e
 [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e
 [<603d980f>] device_suspend+0x528/0x541
 [<603da24b>] dpm_suspend+0x1a2/0x267
 [<603da837>] dpm_suspend_start+0x5d/0x72
 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736
 [...]

Add the fourth argument to the iteration to annotate
this and avoid the splat.

Fixes: 0679963 ("PM: sleep: Make async suspend handle suppliers like parents")
Fixes: ed18738 ("PM: sleep: Make async resume handle consumers like children")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
chewitt pushed a commit that referenced this pull request Sep 1, 2025
If preparing a write bio fails then blk_zone_wplug_bio_work() calls
bio_endio() with zwplug->lock held. If a device mapper driver is stacked
on top of the zoned block device then this results in nested locking of
zwplug->lock. The resulting lockdep complaint is a false positive
because this is nested locking and not recursive locking. Suppress this
false positive by calling blk_zone_wplug_bio_io_error() without holding
zwplug->lock. This is safe because no code in
blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This
patch suppresses the following lockdep complaint:

WARNING: possible recursive locking detected
--------------------------------------------
kworker/3:0H/46 is trying to acquire lock:
ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0

but task is already holding lock:
ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&zwplug->lock);
  lock(&zwplug->lock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by kworker/3:0H/46:
 #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
 #1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
 #2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c

stack backtrace:
CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G        W  OE      6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: sdd_zwplugs blk_zone_wplug_bio_work
Call trace:
 dump_backtrace+0xfc/0x17c
 show_stack+0x18/0x28
 dump_stack_lvl+0x40/0xa0
 dump_stack+0x18/0x24
 print_deadlock_bug+0x38c/0x398
 __lock_acquire+0x13e8/0x2e1c
 lock_acquire+0x134/0x2b4
 _raw_spin_lock_irqsave+0x5c/0x80
 blk_zone_write_plug_bio_endio+0x64/0x1f0
 bio_endio+0x9c/0x240
 __dm_io_complete+0x214/0x260
 clone_endio+0xe8/0x214
 bio_endio+0x218/0x240
 blk_zone_wplug_bio_work+0x204/0x48c
 process_one_work+0x26c/0x65c
 worker_thread+0x33c/0x498
 kthread+0x110/0x134
 ret_from_fork+0x10/0x20

Cc: stable@vger.kernel.org
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: dd291d7 ("block: Introduce zone write plugging")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250825182720.1697203-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
chewitt pushed a commit that referenced this pull request Sep 1, 2025
…ux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 changes for 6.17, take #2

 - Correctly handle 'invariant' system registers for protected VMs

 - Improved handling of VNCR data aborts, including external aborts

 - Fixes for handling of FEAT_RAS for NV guests, providing a sane
   fault context during SEA injection and preventing the use of
   RASv1p1 fault injection hardware

 - Ensure that page table destruction when a VM is destroyed gives an
   opportunity to reschedule

 - Large fix to KVM's infrastructure for managing guest context loaded
   on the CPU, addressing issues where the output of AT emulation
   doesn't get reflected to the guest

 - Fix AT S12 emulation to actually perform stage-2 translation when
   necessary

 - Avoid attempting vLPI irqbypass when GICv4 has been explicitly
   disabled for a VM

 - Minor KVM + selftest fixes
chewitt pushed a commit that referenced this pull request Sep 3, 2025
[ Upstream commit 4611d88 ]

The commit under the Fixes tag added a netdev_assert_locked() in
bnxt_free_ntp_fltrs().  The lock should be held during normal run-time
but the assert will be triggered (see below) during bnxt_remove_one()
which should not need the lock.  The netdev is already unregistered by
then.  Fix it by calling netdev_assert_locked_or_invisible() which will
not assert if the netdev is unregistered.

WARNING: CPU: 5 PID: 2241 at ./include/net/netdev_lock.h:17 bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Modules linked in: rpcrdma rdma_cm iw_cm ib_cm configfs ib_core bnxt_en(-) bridge stp llc x86_pkg_temp_thermal xfs tg3 [last unloaded: bnxt_re]
CPU: 5 UID: 0 PID: 2241 Comm: rmmod Tainted: G S      W           6.16.0 #2 PREEMPT(voluntary)
Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN
Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017
RIP: 0010:bnxt_free_ntp_fltrs+0xf8/0x100 [bnxt_en]
Code: 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 48 8b 47 60 be ff ff ff ff 48 8d b8 28 0c 00 00 e8 d0 cf 41 c3 85 c0 0f 85 2e ff ff ff <0f> 0b e9 27 ff ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffa92082387da0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff9e5b593d8000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: ffffffff83dc9a70 RDI: ffffffff83e1a1cf
RBP: ffff9e5b593d8c80 R08: 0000000000000000 R09: ffffffff8373a2b3
R10: 000000008100009f R11: 0000000000000001 R12: 0000000000000001
R13: ffffffffc01c4478 R14: dead000000000122 R15: dead000000000100
FS:  00007f3a8a52c740(0000) GS:ffff9e631ad1c000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055bb289419c8 CR3: 000000011274e001 CR4: 00000000003706f0
Call Trace:
 <TASK>
 bnxt_remove_one+0x57/0x180 [bnxt_en]
 pci_device_remove+0x39/0xc0
 device_release_driver_internal+0xa5/0x130
 driver_detach+0x42/0x90
 bus_remove_driver+0x61/0xc0
 pci_unregister_driver+0x38/0x90
 bnxt_exit+0xc/0x7d0 [bnxt_en]

Fixes: 004b500 ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250816183850.4125033-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 3, 2025
[ Upstream commit eabcac8 ]

Commit 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service
routine to a threaded IRQ handler") introduced an IRQ lock inversion
issue. Fix this lock inversion by changing the spin_lock_irq() calls into
spin_lock_irqsave() calls in code that can be called either from
interrupt context or from thread context. This patch fixes the following
lockdep complaint:

WARNING: possible irq lock inversion dependency detected
6.12.30-android16-5-maybe-dirty-4k #1 Tainted: G        W  OE
--------------------------------------------------------
kworker/u28:0/12 just changed the state of lock:
ffffff881e29dd60 (&hba->clk_gating.lock){-...}-{2:2}, at: ufshcd_release_scsi_cmd+0x60/0x110
but this lock took another, HARDIRQ-unsafe lock in the past:
 (shost->host_lock){+.+.}-{2:2}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(shost->host_lock);
                               local_irq_disable();
                               lock(&hba->clk_gating.lock);
                               lock(shost->host_lock);
  <Interrupt>
    lock(&hba->clk_gating.lock);

 *** DEADLOCK ***

4 locks held by kworker/u28:0/12:
 #0: ffffff8800ac6158 ((wq_completion)async){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
 #1: ffffffc085c93d70 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
 #2: ffffff881e29c0e0 (&shost->scan_mutex){+.+.}-{3:3}, at: __scsi_add_device+0x74/0x120
 #3: ffffff881960ea00 (&hwq->cq_lock){-...}-{2:2}, at: ufshcd_mcq_poll_cqe_lock+0x28/0x104

the shortest dependencies between 2nd lock and 1st lock:
 -> (shost->host_lock){+.+.}-{2:2} {
    HARDIRQ-ON-W at:
                      lock_acquire+0x134/0x2b4
                      _raw_spin_lock+0x48/0x64
                      ufshcd_sl_intr+0x4c/0xa08
                      ufshcd_threaded_intr+0x70/0x12c
                      irq_thread_fn+0x48/0xa8
                      irq_thread+0x130/0x1ec
                      kthread+0x110/0x134
                      ret_from_fork+0x10/0x20
    SOFTIRQ-ON-W at:
                      lock_acquire+0x134/0x2b4
                      _raw_spin_lock+0x48/0x64
                      ufshcd_sl_intr+0x4c/0xa08
                      ufshcd_threaded_intr+0x70/0x12c
                      irq_thread_fn+0x48/0xa8
                      irq_thread+0x130/0x1ec
                      kthread+0x110/0x134
                      ret_from_fork+0x10/0x20
    INITIAL USE at:
                     lock_acquire+0x134/0x2b4
                     _raw_spin_lock+0x48/0x64
                     ufshcd_sl_intr+0x4c/0xa08
                     ufshcd_threaded_intr+0x70/0x12c
                     irq_thread_fn+0x48/0xa8
                     irq_thread+0x130/0x1ec
                     kthread+0x110/0x134
                     ret_from_fork+0x10/0x20
  }
  ... key      at: [<ffffffc085ba1a98>] scsi_host_alloc.__key+0x0/0x10
  ... acquired at:
   _raw_spin_lock_irqsave+0x5c/0x80
   __ufshcd_release+0x78/0x118
   ufshcd_send_uic_cmd+0xe4/0x118
   ufshcd_dme_set_attr+0x88/0x1c8
   ufs_google_phy_initialization+0x68/0x418 [ufs]
   ufs_google_link_startup_notify+0x78/0x27c [ufs]
   ufshcd_link_startup+0x84/0x720
   ufshcd_init+0xf3c/0x1330
   ufshcd_pltfrm_init+0x728/0x7d8
   ufs_google_probe+0x30/0x84 [ufs]
   platform_probe+0xa0/0xe0
   really_probe+0x114/0x454
   __driver_probe_device+0xa4/0x160
   driver_probe_device+0x44/0x23c
   __driver_attach_async_helper+0x60/0xd4
   async_run_entry_fn+0x4c/0x17c
   process_one_work+0x26c/0x65c
   worker_thread+0x33c/0x498
   kthread+0x110/0x134
   ret_from_fork+0x10/0x20

-> (&hba->clk_gating.lock){-...}-{2:2} {
   IN-HARDIRQ-W at:
                    lock_acquire+0x134/0x2b4
                    _raw_spin_lock_irqsave+0x5c/0x80
                    ufshcd_release_scsi_cmd+0x60/0x110
                    ufshcd_compl_one_cqe+0x2c0/0x3f4
                    ufshcd_mcq_poll_cqe_lock+0xb0/0x104
                    ufs_google_mcq_intr+0x80/0xa0 [ufs]
                    __handle_irq_event_percpu+0x104/0x32c
                    handle_irq_event+0x40/0x9c
                    handle_fasteoi_irq+0x170/0x2e8
                    generic_handle_domain_irq+0x58/0x80
                    gic_handle_irq+0x48/0x104
                    call_on_irq_stack+0x3c/0x50
                    do_interrupt_handler+0x7c/0xd8
                    el1_interrupt+0x34/0x58
                    el1h_64_irq_handler+0x18/0x24
                    el1h_64_irq+0x68/0x6c
                    _raw_spin_unlock_irqrestore+0x3c/0x6c
                    debug_object_assert_init+0x16c/0x21c
                    __mod_timer+0x4c/0x48c
                    schedule_timeout+0xd4/0x16c
                    io_schedule_timeout+0x48/0x70
                    do_wait_for_common+0x100/0x194
                    wait_for_completion_io_timeout+0x48/0x6c
                    blk_execute_rq+0x124/0x17c
                    scsi_execute_cmd+0x18c/0x3f8
                    scsi_probe_and_add_lun+0x204/0xd74
                    __scsi_add_device+0xbc/0x120
                    ufshcd_async_scan+0x80/0x3c0
                    async_run_entry_fn+0x4c/0x17c
                    process_one_work+0x26c/0x65c
                    worker_thread+0x33c/0x498
                    kthread+0x110/0x134
                    ret_from_fork+0x10/0x20
   INITIAL USE at:
                   lock_acquire+0x134/0x2b4
                   _raw_spin_lock_irqsave+0x5c/0x80
                   ufshcd_hold+0x34/0x14c
                   ufshcd_send_uic_cmd+0x28/0x118
                   ufshcd_dme_set_attr+0x88/0x1c8
                   ufs_google_phy_initialization+0x68/0x418 [ufs]
                   ufs_google_link_startup_notify+0x78/0x27c [ufs]
                   ufshcd_link_startup+0x84/0x720
                   ufshcd_init+0xf3c/0x1330
                   ufshcd_pltfrm_init+0x728/0x7d8
                   ufs_google_probe+0x30/0x84 [ufs]
                   platform_probe+0xa0/0xe0
                   really_probe+0x114/0x454
                   __driver_probe_device+0xa4/0x160
                   driver_probe_device+0x44/0x23c
                   __driver_attach_async_helper+0x60/0xd4
                   async_run_entry_fn+0x4c/0x17c
                   process_one_work+0x26c/0x65c
                   worker_thread+0x33c/0x498
                   kthread+0x110/0x134
                   ret_from_fork+0x10/0x20
 }
 ... key      at: [<ffffffc085ba6fe8>] ufshcd_init.__key+0x0/0x10
 ... acquired at:
   mark_lock+0x1c4/0x224
   __lock_acquire+0x438/0x2e1c
   lock_acquire+0x134/0x2b4
   _raw_spin_lock_irqsave+0x5c/0x80
   ufshcd_release_scsi_cmd+0x60/0x110
   ufshcd_compl_one_cqe+0x2c0/0x3f4
   ufshcd_mcq_poll_cqe_lock+0xb0/0x104
   ufs_google_mcq_intr+0x80/0xa0 [ufs]
   __handle_irq_event_percpu+0x104/0x32c
   handle_irq_event+0x40/0x9c
   handle_fasteoi_irq+0x170/0x2e8
   generic_handle_domain_irq+0x58/0x80
   gic_handle_irq+0x48/0x104
   call_on_irq_stack+0x3c/0x50
   do_interrupt_handler+0x7c/0xd8
   el1_interrupt+0x34/0x58
   el1h_64_irq_handler+0x18/0x24
   el1h_64_irq+0x68/0x6c
   _raw_spin_unlock_irqrestore+0x3c/0x6c
   debug_object_assert_init+0x16c/0x21c
   __mod_timer+0x4c/0x48c
   schedule_timeout+0xd4/0x16c
   io_schedule_timeout+0x48/0x70
   do_wait_for_common+0x100/0x194
   wait_for_completion_io_timeout+0x48/0x6c
   blk_execute_rq+0x124/0x17c
   scsi_execute_cmd+0x18c/0x3f8
   scsi_probe_and_add_lun+0x204/0xd74
   __scsi_add_device+0xbc/0x120
   ufshcd_async_scan+0x80/0x3c0
   async_run_entry_fn+0x4c/0x17c
   process_one_work+0x26c/0x65c
   worker_thread+0x33c/0x498
   kthread+0x110/0x134
   ret_from_fork+0x10/0x20

stack backtrace:
CPU: 6 UID: 0 PID: 12 Comm: kworker/u28:0 Tainted: G        W  OE      6.12.30-android16-5-maybe-dirty-4k #1 ccd4020fe444bdf629efc3b86df6be920b8df7d0
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: async async_run_entry_fn
Call trace:
 dump_backtrace+0xfc/0x17c
 show_stack+0x18/0x28
 dump_stack_lvl+0x40/0xa0
 dump_stack+0x18/0x24
 print_irq_inversion_bug+0x2fc/0x304
 mark_lock_irq+0x388/0x4fc
 mark_lock+0x1c4/0x224
 __lock_acquire+0x438/0x2e1c
 lock_acquire+0x134/0x2b4
 _raw_spin_lock_irqsave+0x5c/0x80
 ufshcd_release_scsi_cmd+0x60/0x110
 ufshcd_compl_one_cqe+0x2c0/0x3f4
 ufshcd_mcq_poll_cqe_lock+0xb0/0x104
 ufs_google_mcq_intr+0x80/0xa0 [ufs dd6f385554e109da094ab91d5f7be18625a2222a]
 __handle_irq_event_percpu+0x104/0x32c
 handle_irq_event+0x40/0x9c
 handle_fasteoi_irq+0x170/0x2e8
 generic_handle_domain_irq+0x58/0x80
 gic_handle_irq+0x48/0x104
 call_on_irq_stack+0x3c/0x50
 do_interrupt_handler+0x7c/0xd8
 el1_interrupt+0x34/0x58
 el1h_64_irq_handler+0x18/0x24
 el1h_64_irq+0x68/0x6c
 _raw_spin_unlock_irqrestore+0x3c/0x6c
 debug_object_assert_init+0x16c/0x21c
 __mod_timer+0x4c/0x48c
 schedule_timeout+0xd4/0x16c
 io_schedule_timeout+0x48/0x70
 do_wait_for_common+0x100/0x194
 wait_for_completion_io_timeout+0x48/0x6c
 blk_execute_rq+0x124/0x17c
 scsi_execute_cmd+0x18c/0x3f8
 scsi_probe_and_add_lun+0x204/0xd74
 __scsi_add_device+0xbc/0x120
 ufshcd_async_scan+0x80/0x3c0
 async_run_entry_fn+0x4c/0x17c
 process_one_work+0x26c/0x65c
 worker_thread+0x33c/0x498
 kthread+0x110/0x134
 ret_from_fork+0x10/0x20

Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Fixes: 3c7ac40 ("scsi: ufs: core: Delegate the interrupt service routine to a threaded IRQ handler")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20250815155842.472867-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 9, 2025
[ Upstream commit 9776651 ]

With CONFIG_DEBUG_OBJECTS_TIMERS unloading hfcpci module leads
to the following splat:

[  250.215892] ODEBUG: assert_init not available (active state 0) object: ffffffffc01a3dc0 object type: timer_list hint: 0x0
[  250.217520] WARNING: CPU: 0 PID: 233 at lib/debugobjects.c:612 debug_print_object+0x1b6/0x2c0
[  250.218775] Modules linked in: hfcpci(-) mISDN_core
[  250.219537] CPU: 0 UID: 0 PID: 233 Comm: rmmod Not tainted 6.17.0-rc2-g6f713187ac98 #2 PREEMPT(voluntary)
[  250.220940] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[  250.222377] RIP: 0010:debug_print_object+0x1b6/0x2c0
[  250.223131] Code: fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 4f 41 56 48 8b 14 dd a0 4e 01 9f 48 89 ee 48 c7 c7 20 46 01 9f e8 cb 84d
[  250.225805] RSP: 0018:ffff888015ea7c08 EFLAGS: 00010286
[  250.226608] RAX: 0000000000000000 RBX: 0000000000000005 RCX: ffffffff9be93a95
[  250.227708] RDX: 1ffff1100d945138 RSI: 0000000000000008 RDI: ffff88806ca289c0
[  250.228993] RBP: ffffffff9f014a00 R08: 0000000000000001 R09: ffffed1002bd4f39
[  250.230043] R10: ffff888015ea79cf R11: 0000000000000001 R12: 0000000000000001
[  250.231185] R13: ffffffff9eea0520 R14: 0000000000000000 R15: ffff888015ea7cc8
[  250.232454] FS:  00007f3208f01540(0000) GS:ffff8880caf5a000(0000) knlGS:0000000000000000
[  250.233851] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  250.234856] CR2: 00007f32090a7421 CR3: 0000000004d63000 CR4: 00000000000006f0
[  250.236117] Call Trace:
[  250.236599]  <TASK>
[  250.236967]  ? trace_irq_enable.constprop.0+0xd4/0x130
[  250.237920]  debug_object_assert_init+0x1f6/0x310
[  250.238762]  ? __pfx_debug_object_assert_init+0x10/0x10
[  250.239658]  ? __lock_acquire+0xdea/0x1c70
[  250.240369]  __try_to_del_timer_sync+0x69/0x140
[  250.241172]  ? __pfx___try_to_del_timer_sync+0x10/0x10
[  250.242058]  ? __timer_delete_sync+0xc6/0x120
[  250.242842]  ? lock_acquire+0x30/0x80
[  250.243474]  ? __timer_delete_sync+0xc6/0x120
[  250.244262]  __timer_delete_sync+0x98/0x120
[  250.245015]  HFC_cleanup+0x10/0x20 [hfcpci]
[  250.245704]  __do_sys_delete_module+0x348/0x510
[  250.246461]  ? __pfx___do_sys_delete_module+0x10/0x10
[  250.247338]  do_syscall_64+0xc1/0x360
[  250.247924]  entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fix this by initializing hfc_tl timer with DEFINE_TIMER macro.
Also, use mod_timer instead of manual timeout update.

Fixes: 87c5fa1 ("mISDN: Add different different timer settings for hfc-pci")
Fixes: 175302f ("mISDN: hfcpci: Fix use-after-free bug in hfcpci_softirq")
Signed-off-by: Vladimir Riabchun <ferr.lambarginio@gmail.com>
Link: https://patch.msgid.link/aKiy2D_LiWpQ5kXq@vova-pc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 9, 2025
commit 198f36f upstream.

If preparing a write bio fails then blk_zone_wplug_bio_work() calls
bio_endio() with zwplug->lock held. If a device mapper driver is stacked
on top of the zoned block device then this results in nested locking of
zwplug->lock. The resulting lockdep complaint is a false positive
because this is nested locking and not recursive locking. Suppress this
false positive by calling blk_zone_wplug_bio_io_error() without holding
zwplug->lock. This is safe because no code in
blk_zone_wplug_bio_io_error() depends on zwplug->lock being held. This
patch suppresses the following lockdep complaint:

WARNING: possible recursive locking detected
--------------------------------------------
kworker/3:0H/46 is trying to acquire lock:
ffffff882968b830 (&zwplug->lock){-...}-{2:2}, at: blk_zone_write_plug_bio_endio+0x64/0x1f0

but task is already holding lock:
ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&zwplug->lock);
  lock(&zwplug->lock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by kworker/3:0H/46:
 #0: ffffff8809486758 ((wq_completion)sdd_zwplugs){+.+.}-{0:0}, at: process_one_work+0x1bc/0x65c
 #1: ffffffc085de3d70 ((work_completion)(&zwplug->bio_work)){+.+.}-{0:0}, at: process_one_work+0x1e4/0x65c
 #2: ffffff88315bc230 (&zwplug->lock){-...}-{2:2}, at: blk_zone_wplug_bio_work+0x8c/0x48c

stack backtrace:
CPU: 3 UID: 0 PID: 46 Comm: kworker/3:0H Tainted: G        W  OE      6.12.38-android16-5-maybe-dirty-4k #1 8b362b6f76e3645a58cd27d86982bce10d150025
Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Spacecraft board based on MALIBU (DT)
Workqueue: sdd_zwplugs blk_zone_wplug_bio_work
Call trace:
 dump_backtrace+0xfc/0x17c
 show_stack+0x18/0x28
 dump_stack_lvl+0x40/0xa0
 dump_stack+0x18/0x24
 print_deadlock_bug+0x38c/0x398
 __lock_acquire+0x13e8/0x2e1c
 lock_acquire+0x134/0x2b4
 _raw_spin_lock_irqsave+0x5c/0x80
 blk_zone_write_plug_bio_endio+0x64/0x1f0
 bio_endio+0x9c/0x240
 __dm_io_complete+0x214/0x260
 clone_endio+0xe8/0x214
 bio_endio+0x218/0x240
 blk_zone_wplug_bio_work+0x204/0x48c
 process_one_work+0x26c/0x65c
 worker_thread+0x33c/0x498
 kthread+0x110/0x134
 ret_from_fork+0x10/0x20

Cc: stable@vger.kernel.org
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: dd291d7 ("block: Introduce zone write plugging")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250825182720.1697203-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
chewitt pushed a commit that referenced this pull request Sep 11, 2025
When the "proxy" option is enabled on a VXLAN device, the device will
suppress ARP requests and IPv6 Neighbor Solicitation messages if it is
able to reply on behalf of the remote host. That is, if a matching and
valid neighbor entry is configured on the VXLAN device whose MAC address
is not behind the "any" remote (0.0.0.0 / ::).

The code currently assumes that the FDB entry for the neighbor's MAC
address points to a valid remote destination, but this is incorrect if
the entry is associated with an FDB nexthop group. This can result in a
NPD [1][3] which can be reproduced using [2][4].

Fix by checking that the remote destination exists before dereferencing
it.

[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_xmit+0xb58/0x15f0
[...]
Call Trace:
 <TASK>
 dev_hard_start_xmit+0x5d/0x1c0
 __dev_queue_xmit+0x246/0xfd0
 packet_sendmsg+0x113a/0x1850
 __sock_sendmsg+0x38/0x70
 __sys_sendto+0x126/0x180
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0xa4/0x260
 entry_SYSCALL_64_after_hwframe+0x4b/0x53

[2]
 #!/bin/bash

 ip address add 192.0.2.1/32 dev lo

 ip nexthop add id 1 via 192.0.2.2 fdb
 ip nexthop add id 10 group 1 fdb

 ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy

 ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0

 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10

 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3

[3]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014
RIP: 0010:vxlan_xmit+0x803/0x1600
[...]
Call Trace:
 <TASK>
 dev_hard_start_xmit+0x5d/0x1c0
 __dev_queue_xmit+0x246/0xfd0
 ip6_finish_output2+0x210/0x6c0
 ip6_finish_output+0x1af/0x2b0
 ip6_mr_output+0x92/0x3e0
 ip6_send_skb+0x30/0x90
 rawv6_sendmsg+0xe6e/0x12e0
 __sock_sendmsg+0x38/0x70
 __sys_sendto+0x126/0x180
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0xa4/0x260
 entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f383422ec77

[4]
 #!/bin/bash

 ip address add 2001:db8:1::1/128 dev lo

 ip nexthop add id 1 via 2001:db8:1::1 fdb
 ip nexthop add id 10 group 1 fdb

 ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy

 ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0

 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10

 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0

Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 11, 2025
Ido Schimmel says:

====================
vxlan: Fix NPDs when using nexthop objects

With FDB nexthop groups, VXLAN FDB entries do not necessarily point to
a remote destination but rather to an FDB nexthop group. This means that
first_remote_{rcu,rtnl}() can return NULL and a few places in the driver
were not ready for that, resulting in NULL pointer dereferences.
Patches #1-#2 fix these NPDs.

Note that vxlan_fdb_find_uc() still dereferences the remote returned by
first_remote_rcu() without checking that it is not NULL, but this
function is only invoked by a single driver which vetoes the creation of
FDB nexthop groups. I will patch this in net-next to make the code less
fragile.

Patch #3 adds a selftests which exercises these code paths and tests
basic Tx functionality with FDB nexthop groups. I verified that the test
crashes the kernel without the first two patches.
====================

Link: https://patch.msgid.link/20250901065035.159644-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 11, 2025
When transmitting a PTP frame which is timestamp using 2 step, the
following warning appears if CONFIG_PROVE_LOCKING is enabled:
=============================
[ BUG: Invalid wait context ]
6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted
-----------------------------
ptp4l/119 is trying to lock:
c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac
other info that might help us debug this:
context-{4:4}
4 locks held by ptp4l/119:
 #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440
 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440
 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350
 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350
stack backtrace:
CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE
Hardware name: Generic DT based system
Call trace:
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x7c/0xac
 dump_stack_lvl from __lock_acquire+0x8e8/0x29dc
 __lock_acquire from lock_acquire+0x108/0x38c
 lock_acquire from __mutex_lock+0xb0/0xe78
 __mutex_lock from mutex_lock_nested+0x1c/0x24
 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac
 vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8
 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350
 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0
 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350
 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440
 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568
 packet_sendmsg from __sys_sendto+0x110/0x19c
 __sys_sendto from sys_send+0x18/0x20
 sys_send from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b05fa8 to 0xf0b05ff0)
5fa0:                   00000001 0000000 0000000 0004b47a 0000003a 00000000
5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000
5fe0: 00000001 bee9d420 00025a10 b6e75c7c

So, instead of using the ts_lock for tx_queue, use the spinlock that
skb_buff_head has.

Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 12, 2025
[ Upstream commit 1f5d2fd ]

When the "proxy" option is enabled on a VXLAN device, the device will
suppress ARP requests and IPv6 Neighbor Solicitation messages if it is
able to reply on behalf of the remote host. That is, if a matching and
valid neighbor entry is configured on the VXLAN device whose MAC address
is not behind the "any" remote (0.0.0.0 / ::).

The code currently assumes that the FDB entry for the neighbor's MAC
address points to a valid remote destination, but this is incorrect if
the entry is associated with an FDB nexthop group. This can result in a
NPD [1][3] which can be reproduced using [2][4].

Fix by checking that the remote destination exists before dereferencing
it.

[1]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 4 UID: 0 PID: 365 Comm: arping Not tainted 6.17.0-rc2-virtme-g2a89cb21162c #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-4.fc41 04/01/2014
RIP: 0010:vxlan_xmit+0xb58/0x15f0
[...]
Call Trace:
 <TASK>
 dev_hard_start_xmit+0x5d/0x1c0
 __dev_queue_xmit+0x246/0xfd0
 packet_sendmsg+0x113a/0x1850
 __sock_sendmsg+0x38/0x70
 __sys_sendto+0x126/0x180
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0xa4/0x260
 entry_SYSCALL_64_after_hwframe+0x4b/0x53

[2]
 #!/bin/bash

 ip address add 192.0.2.1/32 dev lo

 ip nexthop add id 1 via 192.0.2.2 fdb
 ip nexthop add id 10 group 1 fdb

 ip link add name vx0 up type vxlan id 10010 local 192.0.2.1 dstport 4789 proxy

 ip neigh add 192.0.2.3 lladdr 00:11:22:33:44:55 nud perm dev vx0

 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10

 arping -b -c 1 -s 192.0.2.1 -I vx0 192.0.2.3

[3]
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
CPU: 13 UID: 0 PID: 372 Comm: ndisc6 Not tainted 6.17.0-rc2-virtmne-g6ee90cb26014 #3 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1v996), BIOS 1.17.0-4.fc41 04/01/2x014
RIP: 0010:vxlan_xmit+0x803/0x1600
[...]
Call Trace:
 <TASK>
 dev_hard_start_xmit+0x5d/0x1c0
 __dev_queue_xmit+0x246/0xfd0
 ip6_finish_output2+0x210/0x6c0
 ip6_finish_output+0x1af/0x2b0
 ip6_mr_output+0x92/0x3e0
 ip6_send_skb+0x30/0x90
 rawv6_sendmsg+0xe6e/0x12e0
 __sock_sendmsg+0x38/0x70
 __sys_sendto+0x126/0x180
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0xa4/0x260
 entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f383422ec77

[4]
 #!/bin/bash

 ip address add 2001:db8:1::1/128 dev lo

 ip nexthop add id 1 via 2001:db8:1::1 fdb
 ip nexthop add id 10 group 1 fdb

 ip link add name vx0 up type vxlan id 10010 local 2001:db8:1::1 dstport 4789 proxy

 ip neigh add 2001:db8:1::3 lladdr 00:11:22:33:44:55 nud perm dev vx0

 bridge fdb add 00:11:22:33:44:55 dev vx0 self static nhid 10

 ndisc6 -r 1 -s 2001:db8:1::1 -w 1 2001:db8:1::3 vx0

Fixes: 1274e1c ("vxlan: ecmp support for mac fdb entries")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250901065035.159644-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 12, 2025
[ Upstream commit 9b2bfdb ]

When transmitting a PTP frame which is timestamp using 2 step, the
following warning appears if CONFIG_PROVE_LOCKING is enabled:
=============================
[ BUG: Invalid wait context ]
6.17.0-rc1-00326-ge6160462704e torvalds#427 Not tainted
-----------------------------
ptp4l/119 is trying to lock:
c2a44ed4 (&vsc8531->ts_lock){+.+.}-{3:3}, at: vsc85xx_txtstamp+0x50/0xac
other info that might help us debug this:
context-{4:4}
4 locks held by ptp4l/119:
 #0: c145f068 (rcu_read_lock_bh){....}-{1:2}, at: __dev_queue_xmit+0x58/0x1440
 #1: c29df974 (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+...}-{2:2}, at: __dev_queue_xmit+0x5c4/0x1440
 #2: c2aaaad0 (_xmit_ETHER#2){+.-.}-{2:2}, at: sch_direct_xmit+0x108/0x350
 #3: c2aac170 (&lan966x->tx_lock){+.-.}-{2:2}, at: lan966x_port_xmit+0xd0/0x350
stack backtrace:
CPU: 0 UID: 0 PID: 119 Comm: ptp4l Not tainted 6.17.0-rc1-00326-ge6160462704e torvalds#427 NONE
Hardware name: Generic DT based system
Call trace:
 unwind_backtrace from show_stack+0x10/0x14
 show_stack from dump_stack_lvl+0x7c/0xac
 dump_stack_lvl from __lock_acquire+0x8e8/0x29dc
 __lock_acquire from lock_acquire+0x108/0x38c
 lock_acquire from __mutex_lock+0xb0/0xe78
 __mutex_lock from mutex_lock_nested+0x1c/0x24
 mutex_lock_nested from vsc85xx_txtstamp+0x50/0xac
 vsc85xx_txtstamp from lan966x_fdma_xmit+0xd8/0x3a8
 lan966x_fdma_xmit from lan966x_port_xmit+0x1bc/0x350
 lan966x_port_xmit from dev_hard_start_xmit+0xc8/0x2c0
 dev_hard_start_xmit from sch_direct_xmit+0x8c/0x350
 sch_direct_xmit from __dev_queue_xmit+0x680/0x1440
 __dev_queue_xmit from packet_sendmsg+0xfa4/0x1568
 packet_sendmsg from __sys_sendto+0x110/0x19c
 __sys_sendto from sys_send+0x18/0x20
 sys_send from ret_fast_syscall+0x0/0x1c
Exception stack(0xf0b05fa8 to 0xf0b05ff0)
5fa0:                   00000001 0000000 0000000 0004b47a 0000003a 00000000
5fc0: 00000001 0000000 00000000 00000121 0004af58 00044874 00000000 00000000
5fe0: 00000001 bee9d420 00025a10 b6e75c7c

So, instead of using the ts_lock for tx_queue, use the spinlock that
skb_buff_head has.

Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Fixes: 7d272e6 ("net: phy: mscc: timestamping and PHC support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20250902121259.3257536-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 16, 2025
The commit ced17ee ("Revert "virtio: reject shm region if length is zero"")
exposes the following DAX page fault bug (this fix the failure that getting shm
region alway returns false because of zero length):

The commit 21aa65b ("mm: remove callers of pfn_t functionality") handles
the DAX physical page address incorrectly: the removed macro 'phys_to_pfn_t()'
should be replaced with 'PHYS_PFN()'.

[    1.390321] BUG: unable to handle page fault for address: ffffd3fb40000008
[    1.390875] #PF: supervisor read access in kernel mode
[    1.391257] #PF: error_code(0x0000) - not-present page
[    1.391509] PGD 0 P4D 0
[    1.391626] Oops: Oops: 0000 [#1] SMP NOPTI
[    1.391806] CPU: 6 UID: 1000 PID: 162 Comm: weston Not tainted 6.17.0-rc3-WSL2-STABLE #2 PREEMPT(none)
[    1.392361] RIP: 0010:dax_to_folio+0x14/0x60
[    1.392653] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff
[    1.393727] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086
[    1.394003] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000
[    1.394524] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000
[    1.394967] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000
[    1.395400] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000
[    1.395806] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000
[    1.396268] FS:  000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000
[    1.396715] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.397100] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0
[    1.397518] Call Trace:
[    1.397663]  <TASK>
[    1.397900]  dax_insert_entry+0x13b/0x390
[    1.398179]  dax_fault_iter+0x2a5/0x6c0
[    1.398443]  dax_iomap_pte_fault+0x193/0x3c0
[    1.398750]  __fuse_dax_fault+0x8b/0x270
[    1.398997]  ? vm_mmap_pgoff+0x161/0x210
[    1.399175]  __do_fault+0x30/0x180
[    1.399360]  do_fault+0xc4/0x550
[    1.399547]  __handle_mm_fault+0x8e3/0xf50
[    1.399731]  ? do_syscall_64+0x72/0x1e0
[    1.399958]  handle_mm_fault+0x192/0x2f0
[    1.400204]  do_user_addr_fault+0x20e/0x700
[    1.400418]  exc_page_fault+0x66/0x150
[    1.400602]  asm_exc_page_fault+0x26/0x30
[    1.400831] RIP: 0033:0x72596d1bf703
[    1.401076] Code: 31 f6 45 31 e4 48 8d 15 b3 73 00 00 e8 06 03 00 00 8b 83 68 01 00 00 e9 8e fa ff ff 0f 1f 00 48 8b 44 24 08 4c 89 ee 48 89 df <c7> 00 21 43 34 12 e8 72 09 00 00 e9 6a fa ff ff 0f 1f 44 00 00 e8
[    1.402172] RSP: 002b:00007ffc350f6dc0 EFLAGS: 00010202
[    1.402488] RAX: 0000725970e94000 RBX: 00005b7c642c2560 RCX: 0000725970d359a7
[    1.402898] RDX: 0000000000000003 RSI: 00007ffc350f6dc0 RDI: 00005b7c642c2560
[    1.403284] RBP: 00007ffc350f6e90 R08: 000000000000000d R09: 0000000000000000
[    1.403634] R10: 00007ffc350f6dd8 R11: 0000000000000246 R12: 0000000000000001
[    1.404078] R13: 00007ffc350f6dc0 R14: 0000725970e29ce0 R15: 0000000000000003
[    1.404450]  </TASK>
[    1.404570] Modules linked in:
[    1.404821] CR2: ffffd3fb40000008
[    1.405029] ---[ end trace 0000000000000000 ]---
[    1.405323] RIP: 0010:dax_to_folio+0x14/0x60
[    1.405556] Code: 52 c9 c3 00 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 48 c1 ef 05 48 c1 e7 06 48 03 3d 34 b5 31 01 <48> 8b 57 08 48 89 f8 f6 c2 01 75 2b 66 90 c3 cc cc cc cc f7 c7 ff
[    1.406639] RSP: 0000:ffffaf7d04407aa8 EFLAGS: 00010086
[    1.406910] RAX: 000000a000000000 RBX: ffffaf7d04407bb0 RCX: 0000000000000000
[    1.407379] RDX: ffffd17b40000008 RSI: 0000000000000083 RDI: ffffd3fb40000000
[    1.407800] RBP: 0000000000000011 R08: 000000a000000000 R09: 0000000000000000
[    1.408246] R10: 0000000000001000 R11: ffffaf7d04407c10 R12: 0000000000000000
[    1.408666] R13: ffffa020557be9c0 R14: 0000014000000001 R15: 0000725970e94000
[    1.409170] FS:  000072596d6d2ec0(0000) GS:ffffa0222dc59000(0000) knlGS:0000000000000000
[    1.409608] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    1.409977] CR2: ffffd3fb40000008 CR3: 000000011579c005 CR4: 0000000000372ef0
[    1.410437] Kernel panic - not syncing: Fatal exception
[    1.410857] Kernel Offset: 0xc000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)

Fixes: 21aa65b ("mm: remove callers of pfn_t functionality")
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Link: https://lore.kernel.org/20250904120339.972-1-haiyuewa@163.com
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 16, 2025
Problem description
===================

Lockdep reports a possible circular locking dependency (AB/BA) between
&pl->state_mutex and &phy->lock, as follows.

phylink_resolve() // acquires &pl->state_mutex
-> phylink_major_config()
   -> phy_config_inband() // acquires &pl->phydev->lock

whereas all the other call sites where &pl->state_mutex and
&pl->phydev->lock have the locking scheme reversed. Everywhere else,
&pl->phydev->lock is acquired at the top level, and &pl->state_mutex at
the lower level. A clear example is phylink_bringup_phy().

The outlier is the newly introduced phy_config_inband() and the existing
lock order is the correct one. To understand why it cannot be the other
way around, it is sufficient to consider phylink_phy_change(), phylink's
callback from the PHY device's phy->phy_link_change() virtual method,
invoked by the PHY state machine.

phy_link_up() and phy_link_down(), the (indirect) callers of
phylink_phy_change(), are called with &phydev->lock acquired.
Then phylink_phy_change() acquires its own &pl->state_mutex, to
serialize changes made to its pl->phy_state and pl->link_config.
So all other instances of &pl->state_mutex and &phydev->lock must be
consistent with this order.

Problem impact
==============

I think the kernel runs a serious deadlock risk if an existing
phylink_resolve() thread, which results in a phy_config_inband() call,
is concurrent with a phy_link_up() or phy_link_down() call, which will
deadlock on &pl->state_mutex in phylink_phy_change(). Practically
speaking, the impact may be limited by the slow speed of the medium
auto-negotiation protocol, which makes it unlikely for the current state
to still be unresolved when a new one is detected, but I think the
problem is there. Nonetheless, the problem was discovered using lockdep.

Proposed solution
=================

Practically speaking, the phy_config_inband() requirement of having
phydev->lock acquired must transfer to the caller (phylink is the only
caller). There, it must bubble up until immediately before
&pl->state_mutex is acquired, for the cases where that takes place.

Solution details, considerations, notes
=======================================

This is the phy_config_inband() call graph:

                          sfp_upstream_ops :: connect_phy()
                          |
                          v
                          phylink_sfp_connect_phy()
                          |
                          v
                          phylink_sfp_config_phy()
                          |
                          |   sfp_upstream_ops :: module_insert()
                          |   |
                          |   v
                          |   phylink_sfp_module_insert()
                          |   |
                          |   |   sfp_upstream_ops :: module_start()
                          |   |   |
                          |   |   v
                          |   |   phylink_sfp_module_start()
                          |   |   |
                          |   v   v
                          |   phylink_sfp_config_optical()
 phylink_start()          |   |
   |   phylink_resume()   v   v
   |   |  phylink_sfp_set_config()
   |   |  |
   v   v  v
 phylink_mac_initial_config()
   |   phylink_resolve()
   |   |  phylink_ethtool_ksettings_set()
   v   v  v
   phylink_major_config()
            |
            v
    phy_config_inband()

phylink_major_config() caller #1, phylink_mac_initial_config(), does not
acquire &pl->state_mutex nor do its callers. It must acquire
&pl->phydev->lock prior to calling phylink_major_config().

phylink_major_config() caller #2, phylink_resolve() acquires
&pl->state_mutex, thus also needs to acquire &pl->phydev->lock.

phylink_major_config() caller #3, phylink_ethtool_ksettings_set(), is
completely uninteresting, because it only calls phylink_major_config()
if pl->phydev is NULL (otherwise it calls phy_ethtool_ksettings_set()).
We need to change nothing there.

Other solutions
===============

The lock inversion between &pl->state_mutex and &pl->phydev->lock has
occurred at least once before, as seen in commit c718af2 ("net:
phylink: fix ethtool -A with attached PHYs"). The solution there was to
simply not call phy_set_asym_pause() under the &pl->state_mutex. That
cannot be extended to our case though, where the phy_config_inband()
call is much deeper inside the &pl->state_mutex section.

Fixes: 5fd0f1a ("net: phylink: add negotiation of in-band capabilities")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250904125238.193990-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chewitt pushed a commit that referenced this pull request Sep 16, 2025
5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing
"ranges"") simplified code by using the for_each_of_range() iterator, but
it broke PCI enumeration on Turris Omnia (and probably other mvebu
targets).

Issue #1:

To determine range.flags, of_pci_range_parser_one() uses bus->get_flags(),
which resolves to of_bus_pci_get_flags(), which already returns an
IORESOURCE bit field, and NOT the original flags from the "ranges"
resource.

Then mvebu_get_tgt_attr() attempts the very same conversion again.  Remove
the misinterpretation of range.flags in mvebu_get_tgt_attr(), to restore
the intended behavior.

Issue #2:

The driver needs target and attributes, which are encoded in the raw
address values of the "/soc/pcie/ranges" resource. According to
of_pci_range_parser_one(), the raw values are stored in range.bus_addr and
range.parent_bus_addr, respectively. range.cpu_addr is a translated version
of range.parent_bus_addr, and not relevant here.

Use the correct range structure member, to extract target and attributes.
This restores the intended behavior.

Fixes: 5da3d94 ("PCI: mvebu: Use for_each_of_range() iterator for parsing "ranges"")
Reported-by: Jan Palus <jpalus@fastmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220479
Signed-off-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Tony Dinh <mibodhi@gmail.com>
Tested-by: Jan Palus <jpalus@fastmail.com>
Link: https://patch.msgid.link/20250907102303.29735-1-klaus.kudielka@gmail.com
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

Successfully merging this pull request may close these issues.

2 participants