diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt deleted file mode 100644 index 265b223cd97801..00000000000000 --- a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt +++ /dev/null @@ -1,52 +0,0 @@ -RISC-V Hart-Level Interrupt Controller (HLIC) ---------------------------------------------- - -RISC-V cores include Control Status Registers (CSRs) which are local to each -CPU core (HART in RISC-V terminology) and can be read or written by software. -Some of these CSRs are used to control local interrupts connected to the core. -Every interrupt is ultimately routed through a hart's HLIC before it -interrupts that hart. - -The RISC-V supervisor ISA manual specifies three interrupt sources that are -attached to every HLIC: software interrupts, the timer interrupt, and external -interrupts. Software interrupts are used to send IPIs between cores. The -timer interrupt comes from an architecturally mandated real-time timer that is -controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External -interrupts connect all other device interrupts to the HLIC, which are routed -via the platform-level interrupt controller (PLIC). - -All RISC-V systems that conform to the supervisor ISA specification are -required to have a HLIC with these three interrupt sources present. Since the -interrupt map is defined by the ISA it's not listed in the HLIC's device tree -entry, though external interrupt controllers (like the PLIC, for example) will -need to define how their interrupts map to the relevant HLICs. This means -a PLIC interrupt property will typically list the HLICs for all present HARTs -in the system. - -Required properties: -- compatible : "riscv,cpu-intc" -- #interrupt-cells : should be <1>. The interrupt sources are defined by the - RISC-V supervisor ISA manual, with only the following three interrupts being - defined for supervisor mode: - - Source 1 is the supervisor software interrupt, which can be sent by an SBI - call and is reserved for use by software. - - Source 5 is the supervisor timer interrupt, which can be configured by - SBI calls and implements a one-shot timer. - - Source 9 is the supervisor external interrupt, which chains to all other - device interrupts. -- interrupt-controller : Identifies the node as an interrupt controller - -Furthermore, this interrupt-controller MUST be embedded inside the cpu -definition of the hart whose CSRs control these local interrupts. - -An example device tree entry for a HLIC is show below. - - cpu1: cpu@1 { - compatible = "riscv"; - ... - cpu1-intc: interrupt-controller { - #interrupt-cells = <1>; - compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc"; - interrupt-controller; - }; - }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml new file mode 100644 index 00000000000000..83256cc0bd5c6c --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/riscv,cpu-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RISC-V Hart-Level Interrupt Controller (HLIC) + +description: + RISC-V cores include Control Status Registers (CSRs) which are local to + each CPU core (HART in RISC-V terminology) and can be read or written by + software. Some of these CSRs are used to control local interrupts connected + to the core. Every interrupt is ultimately routed through a hart's HLIC + before it interrupts that hart. + + The RISC-V supervisor ISA manual specifies three interrupt sources that are + attached to every HLIC namely software interrupts, the timer interrupt, and + external interrupts. Software interrupts are used to send IPIs between + cores. The timer interrupt comes from an architecturally mandated real- + time timer that is controlled via Supervisor Binary Interface (SBI) calls + and CSR reads. External interrupts connect all other device interrupts to + the HLIC, which are routed via the platform-level interrupt controller + (PLIC). + + All RISC-V systems that conform to the supervisor ISA specification are + required to have a HLIC with these three interrupt sources present. Since + the interrupt map is defined by the ISA it's not listed in the HLIC's device + tree entry, though external interrupt controllers (like the PLIC, for + example) will need to define how their interrupts map to the relevant HLICs. + This means a PLIC interrupt property will typically list the HLICs for all + present HARTs in the system. + +maintainers: + - Palmer Dabbelt + - Paul Walmsley + +properties: + compatible: + oneOf: + - items: + - const: andestech,cpu-intc + - const: riscv,cpu-intc + - const: riscv,cpu-intc + + interrupt-controller: true + + '#interrupt-cells': + const: 1 + description: | + The interrupt sources are defined by the RISC-V supervisor ISA manual, + with only the following three interrupts being defined for + supervisor mode: + - Source 1 is the supervisor software interrupt, which can be sent by + an SBI call and is reserved for use by software. + - Source 5 is the supervisor timer interrupt, which can be configured + by SBI calls and implements a one-shot timer. + - Source 9 is the supervisor external interrupt, which chains to all + other device interrupts. + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + +additionalProperties: false + +examples: + - | + interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index d87dd50f1a4b57..f1241e5e8753b6 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -102,26 +102,7 @@ properties: interrupt-controller: type: object - additionalProperties: false - description: Describes the CPU's local interrupt controller - - properties: - '#interrupt-cells': - const: 1 - - compatible: - oneOf: - - items: - - const: andestech,cpu-intc - - const: riscv,cpu-intc - - const: riscv,cpu-intc - - interrupt-controller: true - - required: - - '#interrupt-cells' - - compatible - - interrupt-controller + $ref: /schemas/interrupt-controller/riscv,cpu-intc.yaml# cpu-idle-states: $ref: /schemas/types.yaml#/definitions/phandle-array