Skip to content

Latest commit

 

History

History

firmware

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
app2.0
app2.0
 
 
app3.0
app3.0
 
 
app3.1
app3.1
 
 
nicla
nicla
 
 
README.md
README.md
 
 

README.md

Firmware

Application Board 2.0

app2.0/DevelopmentDesktop_2.0_Firmware_V3.4.fwu2

  • The default firmware is preloaded in APP2.0.
  • This firmware was obsoleted and removed from app2.0 directory. The user is required to use coines_bridge_flash_firmware instead

app2.0/coines_bootloader/coines_usb_dfu_bl.pkg

  • This is required to run COINES_SDK examples directly on APP2.0 board's microcontroller.

app2.0/default_bootloader/Bootloader_APP2.0.bin

  • This bootloader is a factory programmed default bootloader for APP2.0 board.
  • It supports USB and Bluetooth modes.
  • The user can flash this binary if they have accidentaly overwritten/erased the flash memory.
  • To flash Bootloader_APP2.0.bin:
    1. Install the BOSSA software and locate bossac.
    2. Short J203 with a jumper and power on the board to enter SAM-BA mode.
    3. Use the following command to flash the binary: 
      $ bossac -e -w -v -b Bootloader_APP2.0.bin -U -p <com_port>

app2.0/coines_bridge

  • Enables the communication over serial
  • Run update_coines_bridge_fw.bat to update coines_bridge firmware in APP2.0 board's flash location

Application Board 3.0

app3.0/DevelopmentDesktop_2.0_Firmware_v1.9.bin

  • The default firmware is preloaded in APP3.0.
  • This firmware was obsoleted and removed from app3.0 directory. The user is required to use coines_bridge_flash_firmware instead.

app3.0/bootloader_update/usb_ble_dfu_bootloader.pkg

  • It has the bootloader update package for APP3.0.
  • It comes preloaded on the APP3.0 board's microcontroller.
  • Run the update_bootloader script to update the APP3.0 bootloader (requires a at least an old bootloader).
  • Power on the board with the T2 button pressed to go to bootloader mode (Blue LED lights up).

app3.0/mtp_fw_update/usb_mtp.pkg

  • The usb_mtp.pkg contains the MTP firmware update package for APP3.0.
  • It comes preloaded on the APP3.0 board's microcontroller.
  • It's required to read out files from APP3.0 external flash memory (The board shows up as a USB storage device).
  • Run the update_mtp_fw script to update the APP3.0 MTP firmware (requires the bootloader to be updated).
  • Power on the board with T1 button pressed to go to MTP mode (the Green LED lights up).
  • Format the storage device for first use.

app3.0/coines_bridge

  • Coines bridge firmware for App3.0 board.
  • It enables the communication over the COM port.
  • The user is required to use Development Desktop 2.0, COINES_SDK and coinespy.
  • Run update_coines_bridge_flash_fw.bat to update the coines_bridge firmware in the App3.0 board's flash location.
  • Run update_coines_bridge_ram_fw.bat to update the coines_bridge firmware in the App3.0 board's RAM location.

Application Board 3.1

app3.1/bootloader_update/usb_ble_dfu_bootloader.pkg

  • It has the bootloader update package for APP3.1.
  • It comes preloaded on the APP3.1 board's microcontroller.
  • Run the update_bootloader script to update the APP3.1 bootloader (requires a at least an old bootloader).
  • Power on the board with the S2 button pressed to go to bootloader mode (Blue LED lights up).

app3.1/mtp_fw_update/usb_mtp.pkg

  • The usb_mtp.pkg contains the MTP firmware update package for APP3.1.
  • It comes preloaded on the APP3.1 board's microcontroller.
  • It's required to read out files from APP3.1 external flash memory (The board shows up as a USB storage device).
  • Run the update_mtp_fw script to update the APP3.1 MTP firmware (requires the bootloader to be updated).
  • Power on the board with S3 button pressed to go to MTP mode (the Green LED lights up).
  • Format the storage device for first use.

app3.1/coines_bridge

  • The default firmware is preloaded in APP3.1.
  • It enables the communication over the COM port.
  • The user is required to use Development Desktop 2.0, COINES_SDK and coinespy.
  • Run update_coines_bridge_flash_fw.bat to update the coines_bridge firmware in the APP3.1 board's flash location.
  • Run update_coines_bridge_ram_fw.bat to update the coines_bridge firmware in the APP3.1 board's RAM location.

Nicla

nicla/bootloader_update/ble_dfu_bootloader.hex

  • It has the bootloader update package for Nicla.
  • Run the update_bootloader script to update the bootloader (requires a at least an old bootloader).
  • Press Button 1 three times to go to bootloader mode (Blue LED lights up).

nicla/coines_bridge

  • It enables the communication over the COM port.
  • The user is required to use Development Desktop 2.0, COINES_SDK and coinespy.
  • Run update_coines_bridge_flash_fw.bat to update the coines_bridge firmware in the Nicla board's flash location.