Skip to content

Simple UDP Relay/Forwarder that redirects UDP traffic to another IPv4/v6 destination

License

Notifications You must be signed in to change notification settings

bhargavbhat/udpfwd

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

23 Commits
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

udpfwd

Build Status Codacy Badge

Simple UDP Relay/Passthru/Forwarder that transparently forwards UDP traffic to another destination. Support IPv4 as well as IPv6 (AF independent implementation).

Clone & Build

git clone https://github.com/bhargavbhat/udpfwd.git
cd udpfwd/src
make

Run

udpfwd REQUIRES three command-line arguments (in following order) to run:

  • localip : Address (interface) of local machine to bind on, eg: 127.0.0.1 or ::1
  • localport : Port to listen on the local machine.
  • remoteip : IPv4 address of the remote server (can be 127.0.0.1 or ::1 as well)
  • remoteport: Port number of the remote server

Hence complete invocation to run udpfwd is ./udpfwd 127.0.0.1 5080 127.0.0.1 6070. This will cause the program to listen for traffic on 127.0.0.1:5080 and forward all messages received to 127.0.0.1:6070

Console Logs Explained

  • LISN ADDR: 0.0.0.0 PORT: 5080

    • Printed just as the program starts-up
    • Indicates the IPv4 Addr and Port the program is listening on
  • STORING ADDR: 127.0.0.1 PORT: 49427

    • Printed when the program receives the first message from the client
    • Indicates the IPv4 Addr and Port which will be receive all replies from the remote server
  • C->R ADDR: 127.0.0.1 PORT: 6070

    • Printed when a message from Client (C) is sent to the Remote server (R)
    • IP and Port of remote server is printed as well (ADDR: 127.0.0.1 PORT: 6070)
  • R->S ADDR: 127.0.0.1 PORT: 49427

    • Printed when message from Remote server (R) is sent to the Stored client (S)
    • IP and Port of stored client is printed as well (ADDR: 127.0.0.1 PORT: 49427)
  • K->R ADDR: 127.0.0.1 PORT: 6070

    • Printed when a KeepAlive message (K) is sent to the Remote server (R)
    • IP and Port of remote server is printed as well (ADDR: 127.0.0.1 PORT: 6070)
    • Works only when KeepAlive messages are enabled
  • Misc Logs/Messages:

    • If VERBOSE is defined, contents of UDP payload are logged (in both direction), eg: MESG 0x31 0x32 0x33 0x0a
    • In case of runtime errors, the program will print a short message (eg: bind -> Unable to bind to given port) and quit
    • In case sufficient arguments are not provided, a brief help message is printed and the program terminates

Test Scripts

The 3 scripts in test folder can be used to perform testing:

  • test_server.sh uses socat to create a simple UDP server which echoes back whatever is sent to it
  • test_client.sh uses socat to create a simple UDP client into which user can type in data to be sent to the server
  • test_fwd.sh is used by the test target of the Makefile to start udpfwd such that it forwards data from the Test Client to the Test Server

netcat can also be used to start an interactive server (user can type in responses) rather than a simple echo server. This netcat test server can be via the script test_nc_server.sh present in the test folder.

Test scripts accept a single command-line paramter, which when set to 6 causes the client/server to start with UDP6

Assumptions, Limitations & Notes

  • Key Assumption is that client initiates communication and therefore the client socket params can be saved when the first message is received. The saved socket params will be used as the destination for server replies (i.e. messages sent by server to udpfwd).
  • Max. message size is fixed to 128 (can be changed in source code)
  • UDP payload can be logged to console by defining VERBOSE and recompiling
  • UDP KeepAlive messages (empty UDP packet with len=0) sent to server are supported. The Timeout value between packets can be adjusted in source code. A Timeout of 0 disables this feature. Contents of the KeepAlive message can be customized in code as well

External Dependencies

  • Requires netcat and socat for test scripts

About

Simple UDP Relay/Forwarder that redirects UDP traffic to another IPv4/v6 destination

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published