disko-install enhances the normal nixos-install with disko's partitioning
feature. It can be started from the NixOS installer but it can also be used to
create bootable USB-Sticks from your normal workstation. Furthermore
disko-install has a mount mode that will only mount but not destroy existing
partitions. The mount mode can be used to mount and repair existing NixOS
installations. This document provides a comprehensive guide on how to use
disko-install, including examples for typical usage scenarios.
- a Linux system with Nix installed.
- a target disk or partition for the NixOS installation.
- a Nix flake that defines your desired NixOS configuration.
For a fresh installation, where disko-install will handle partitioning and setting up the disk, use the following syntax:
sudo nix run 'github:nix-community/disko#disko-install' -- --flake <flake-url>#<flake-attr> --disk <disk-name> <disk-device>Example:
First run nixos-generate-config --root /tmp/config --no-filesystems and edit
configuration.nix to your liking.
Than add the following flake.nix inside /tmp/config/etc/nixos. In this
example we assume a system that has been booted with EFI:
{
inputs.nixpkgs.url = "github:nixos/nixpkgs?ref=nixos-unstable";
inputs.disko.url = "github:nix-community/disko";
inputs.disko.inputs.nixpkgs.follows = "nixpkgs";
outputs = { self, disko, nixpkgs }: {
nixosConfigurations.mymachine = nixpkgs.legacyPackages.x86_64-linux.nixos [
./configuration.nix
disko.nixosModules.disko
{
disko.devices = {
disk = {
main = {
# When using disko-install, we will overwrite this value from the commandline
device = "/dev/disk/by-id/some-disk-id";
type = "disk";
content = {
type = "gpt";
partitions = {
MBR = {
type = "EF02"; # for grub MBR
size = "1M";
priority = 1; # Needs to be first partition
};
ESP = {
type = "EF00";
size = "500M";
content = {
type = "filesystem";
format = "vfat";
mountpoint = "/boot";
};
};
root = {
size = "100%";
content = {
type = "filesystem";
format = "ext4";
mountpoint = "/";
};
};
};
};
};
};
};
}
];
};
}Identify the device name that you want to install NixOS to:
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 1 14.9G 0 disk
└─sda1 8:1 1 14.9G 0 part
zd0 230:0 0 10G 0 disk
├─zd0p1 230:1 0 500M 0 part
└─zd0p2 230:2 0 9.5G 0 part /mnt
nvme0n1 259:0 0 1.8T 0 disk
├─nvme0n1p1 259:1 0 1G 0 part /boot
├─nvme0n1p2 259:2 0 16M 0 part
├─nvme0n1p3 259:3 0 250G 0 part
└─nvme0n1p4 259:4 0 1.6T 0 partIn our example, we want to install to a USB-stick (/dev/sda):
$ sudo nix run 'github:nix-community/disko#disko-install' -- --flake '/tmp/config/etc/nixos#mymachine' --disk main /dev/sdaAfterwards you can test your USB-stick by either selecting during the boot or attaching it to a qemu-vm:
$ sudo qemu-kvm -enable-kvm -hda /dev/sda
disko-install is designed for NixOS installations on portable storage or disks that may be transferred between computers. As such, it does not modify the host's NVRAM by default. To ensure your NixOS installation boots seamlessly on new hardware or to prioritize it in your current machine's boot order, use the --write-efi-boot-entries option:
$ sudo nix run 'github:nix-community/disko#disko-install' -- --write-efi-boot-entries --flake '/tmp/config/etc/nixos#mymachine' --disk main /dev/sdaThis command installs NixOS with disko-install and sets the newly installed system as the default boot option, without affecting the flexibility to boot from other devices if needed.
If you want to disko-install from a customer installer without internet, you need to make sure that next the toplevel of your NixOS closure that you plan to install, it also needs diskoScript and all the flake inputs for evaluation.
Add this to your flake.nix output:
{
nixosConfigurations.your-machine = inputs.nixpkgs.lib.nixosSystem {
system = "x86_64-linux";
# to pass this flake into your configuration (see the example below)
specialArgs = {inherit self;};
modules = [
{
# TODO: add your NixOS configuration here, don't forget your hardware-configuration.nix as well!
boot.loader.systemd-boot.enable = true;
imports = [ self.inputs.disko.nixosModules.disko ];
disko.devices = {
disk = {
vdb = {
device = "/dev/disk/by-id/some-disk-id";
type = "disk";
content = {
type = "gpt";
partitions = {
ESP = {
type = "EF00";
size = "500M";
content = {
type = "filesystem";
format = "vfat";
mountpoint = "/boot";
};
};
root = {
size = "100%";
content = {
type = "filesystem";
format = "ext4";
mountpoint = "/";
};
};
};
};
};
};
};
}
];
};
}# `self` here is referring to the flake `self`, you may need to pass it using `specialArgs` or define your NixOS installer configuration
# in the flake.nix itself to get direct access to the `self` flake variable.
{ pkgs, self, ... }:
let
dependencies = [
self.nixosConfigurations.your-machine.config.system.build.toplevel
self.nixosConfigurations.your-machine.config.system.build.diskoScript
self.nixosConfigurations.your-machine.config.system.build.diskoScript.drvPath
self.nixosConfigurations.your-machine.pkgs.stdenv.drvPath
(self.nixosConfigurations.your-machine.pkgs.closureInfo { rootPaths = [ ]; }).drvPath
] ++ builtins.map (i: i.outPath) (builtins.attrValues self.inputs);
closureInfo = pkgs.closureInfo { rootPaths = dependencies; };
in
# Now add `closureInfo` to your NixOS installer
{
environment.etc."install-closure".source = "${closureInfo}/store-paths";
environment.systemPackages = [
(pkgs.writeShellScriptBin "install-nixos-unattended" ''
set -eux
# Replace "/dev/disk/by-id/some-disk-id" with your actual disk ID
exec ${pkgs.disko}/bin/disko-install --flake "${self}#your-machine" --disk vdb "/dev/disk/by-id/some-disk-id"
'')
];
}Also see the NixOS test of disko-install that also runs without internet.