diff --git a/src/docs/devices/Cocoon-DY180363-RGBW-8W-Bulb/DY180363.png b/src/docs/devices/Cocoon-DY180363-RGBW-8W-Bulb/DY180363.png
new file mode 100644
index 000000000..e073a31e7
Binary files /dev/null and b/src/docs/devices/Cocoon-DY180363-RGBW-8W-Bulb/DY180363.png differ
diff --git a/src/docs/devices/Cocoon-DY180363-RGBW-8W-Bulb/index.md b/src/docs/devices/Cocoon-DY180363-RGBW-8W-Bulb/index.md
new file mode 100644
index 000000000..37050c9a1
--- /dev/null
+++ b/src/docs/devices/Cocoon-DY180363-RGBW-8W-Bulb/index.md
@@ -0,0 +1,288 @@
+---
+title: Cocoon DY180363 RGBW 8W Bulb
+date-published: 2024-10-09
+type: light
+standard: global
+board: esp8266
+difficulty: 2
+---
+
+## General Notes
+
+The Cocoon DY180363 was a RGB Smart Bulb sold at Aldi in Australia & the UK between 2020 and 2023.
+
+The bulb had a few variants (`-E` for AU/Taiwan, and `-B` for the rest of the world), but this configuration should work for both.
+
+[https://support.cocoonproducts.com.au/hc/en-au/sections/360000250915-Smart-LED-Light-Bulb-E27](https://support.cocoonproducts.com.au/hc/en-au/sections/360000250915-Smart-LED-Light-Bulb-E27)
+
+![Cocoon DY180363 RGBW 8W Bulb](DY180363.png "Cocoon DY180363 RGBW 8W Bulb")
+
+## GPIO Pinout
+
+| Pin     | Function                           |
+|---------|------------------------------------|
+| GPIO4   | PWM Light - red                    |
+| GPIO5   | PWM Light - white                  |
+| GPIO12  | PWM Light - green                  |
+| GPIO14  | PWM Light - blue                   |
+
+## Basic Configuration
+
+Notes on the configuration code:
+
+- Use the `mini`fied version to complete the initial flash, otherwise the compiled image will be too big for OTA.
+- Then, once flashed, you can use the full example after updating the `use_address` value under `wifi:` to point to the new bulb  
+
+### Minified Configuration
+
+Take the output of this ESPHome build (which should be less than 500kb) and use it with [tuya-convert](https://github.com/ct-Open-Source/tuya-convert) to get a good base-flash.
+
+```yaml
+esphome:
+  name: test-light
+  friendly_name: 'Test Light (minified)'
+  comment: 'Cocoon DY180363-E (ex-Tuya)'
+
+esp8266:
+  board: esp01_1m
+
+# Enable logging
+logger:
+
+# Connectivity configuration
+ota:
+  - platform: esphome
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  ap:
+
+web_server:
+  include_internal: True
+  version: 3
+
+# GPIO Output configuration
+output:
+  - platform: esp8266_pwm
+    id: output_red
+    pin: GPIO4
+  - platform: esp8266_pwm
+    id: output_green
+    pin: GPIO12
+  - platform: esp8266_pwm
+    id: output_blue
+    pin: GPIO14
+  - platform: esp8266_pwm
+    id: output_white
+    pin: GPIO5
+
+# Core light functionality
+light:
+  - platform: rgbw
+    name: None
+    icon: mdi:light
+    id: this_light
+    red: output_red
+    green: output_green
+    blue: output_blue
+    white: output_white
+    color_interlock: True
+    # Attempt to restore state and default to OFF if not possible to restore.
+    restore_mode: RESTORE_DEFAULT_OFF
+```
+
+### Full configuration
+
+Once your device is configured, you can use the full-configuration below to add required sensors/connectivity, etc.
+
+```yaml
+substitutions:
+  friendly_name: 'Test Light' # human-readable
+  device_name: 'test-light' # machine-readable; only use dashes
+  description: 'Cocoon DY180363-E (ex-Tuya)'
+
+esphome:
+  name: ${device_name}
+  friendly_name: ${friendly_name}
+  comment: ${description}
+
+esp8266:
+  board: esp01_1m
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+
+# Connectivity configuration
+# mqtt: # Uncomment if you're using MQTT
+#   broker: !secret mqtt_broker
+#   username: !secret mqtt_user
+#   password: !secret mqtt_pass
+#   birth_message:
+#   shutdown_message:
+#   will_message:
+network:
+  # enable_ipv6: True # Uncomment if you're using IPv6
+ota:
+  - platform: esphome
+update:
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+  ap:
+  ###################################
+  # Uncomment & update the below to move an existing bulb to a new OTA config:
+  # Once the config is updated, you should be able to remove this and use mDNS again
+  # use_address: "PREVIOUS.IP.FOR.OTA"
+  ###################################
+web_server:
+  include_internal: True
+  version: 3
+
+# Default sensors
+binary_sensor:
+  - platform: status
+    name: "${friendly_name} Status"
+    icon: mdi:check-network-outline
+sensor:
+  - platform: uptime
+    name: "${friendly_name} Uptime"
+  - platform: wifi_signal
+    id: wifi_signal_db
+    name: "${friendly_name} WiFi Signal"
+    icon: mdi:wifi
+    update_interval: 60s
+  # Reports the WiFi signal strength in % instead
+  - platform: copy
+    source_id: wifi_signal_db
+    name: "${friendly_name} WiFi Signal Percent"
+    icon: mdi:wifi
+    filters:
+      - lambda: return min(max(2 * (x + 100.0), 0.0), 100.0);
+    unit_of_measurement: "Signal %"
+    entity_category: "diagnostic"
+    device_class: ""
+text_sensor:
+  - platform: wifi_info
+    ip_address:
+      name: "${friendly_name} IP Address"
+      icon: mdi:ip
+      # address_0:
+      #   name: "${friendly_name} IP Address: 0"
+      #   icon: mdi:ip-network
+      # address_1:
+      #   name: "${friendly_name} IP Address: 1"
+      #   icon: mdi:ip-network
+      # address_2:
+      #   name: "${friendly_name} IP Address: 2"
+      #   icon: mdi:ip-network
+      # address_3:
+      #   name: "${friendly_name} IP Address: 3"
+      #   icon: mdi:ip-network
+      # address_4:
+      #   name: "${friendly_name} IP Address: 4"
+      #   icon: mdi:ip-network
+    dns_address:
+      name: "${friendly_name} DNS Address"
+      icon: mdi:ip-outline
+    ssid:
+      name: "${friendly_name} Connected SSID"
+      icon: mdi:network
+    mac_address:
+      name: "${friendly_name} Mac Wifi Address"
+      icon: mdi:desktop-classic
+time:
+  - platform: homeassistant
+    id: homeassistant_time
+
+# GPIO Output configuration
+output:
+  - platform: esp8266_pwm
+    id: output_red
+    pin: GPIO4
+  - platform: esp8266_pwm
+    id: output_green
+    pin: GPIO12
+  - platform: esp8266_pwm
+    id: output_blue
+    pin: GPIO14
+  - platform: esp8266_pwm
+    id: output_white
+    pin: GPIO5
+
+# Core light functionality
+light:
+  - platform: rgbw
+    name: None
+    icon: mdi:lightbulb
+    id: this_light
+    red: output_red
+    green: output_green
+    blue: output_blue
+    white: output_white
+    color_interlock: True
+    effects:
+      # Use default parameters:
+      - strobe:
+      - flicker:
+      - pulse:
+      - random:
+      # Add some custom ones:
+      - lambda:
+          name: "RGB Fade"
+          update_interval: 4s
+          lambda: |-
+            static int state = 0;
+            auto call = id(this_light).turn_on();
+            call.set_transition_length(3000);
+            if (state == 0) {
+              call.set_rgb(1.0, 0.0, 0.0);
+            } else if (state == 1) {
+              call.set_rgb(0.0, 1.0, 0.0);
+            } else if (state == 2) {
+              call.set_rgb(0.0, 0.0, 1.0);
+            } else {
+              call.set_rgb(1.0, 0.0, 0.0);
+            }
+            call.set_white(0.0);
+            call.perform();
+            state += 1;
+            if (state == 3)
+              state = 0;
+      - lambda:
+          name: "Pulsing Red"
+          update_interval: 2s
+          lambda: |-
+            static int state = 0;
+            auto call = id(this_light).turn_on();
+            call.set_transition_length(1500);
+            if (state == 0) {
+              call.set_rgb(1.0, 0.0, 0.0);
+              call.set_brightness(1.0);
+            } else if (state == 1) {
+              call.set_rgb(1.0, 0.0, 0.0);
+              call.set_brightness(0.0);
+            }
+            call.set_white(0.0);
+            call.perform();
+            state += 1;
+            if (state == 1)
+              state = 0;
+      - lambda:
+          name: "Random Fade"
+          update_interval: 3s
+          lambda: |-
+            auto call = id(this_light).turn_on();
+            call.set_red_if_supported(random_float());
+            call.set_green_if_supported(random_float());
+            call.set_blue_if_supported(random_float());
+            call.set_white_if_supported(0.0);
+            call.set_transition_length_if_supported(2000);
+            call.set_publish(true);
+            call.set_save(false);
+            call.perform();
+    # Attempt to restore state and default to OFF if not possible to restore.
+    restore_mode: RESTORE_DEFAULT_OFF
+```