Merge pull request #17 from alfran/development

Improved compatibility and removed unwanted files.

Author: sergiotomasello

cores/arduino/Arduino.h

@@ -1,5 +1,21 @@
-// to add license
+/*
+  Arduino.h - Main include file for the Arduino SDK
+  Copyright (c) 2005-2013 Arduino Team.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+  Lesser General Public License for more details.
 
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
 
 /*
  * Arduino srl

cores/arduino/HardwareSerial.cpp

@@ -44,7 +44,7 @@
 /* UART handler declaration */
 UART_HandleTypeDef UartHandle;
 
-HardwareSerial Serial0(UART4_dev);
+HardwareSerial Serial(UART4_dev);//Serial0(UART4_dev);
 HardwareSerial Serial1(USART3_dev);
 HardwareSerial Serial2(USART2_dev);
 HardwareSerial Serial3(USART6_dev);

cores/arduino/HardwareSerial.h

@@ -79,7 +79,7 @@ class HardwareSerial : public Stream {
     uint8 rx_pin;
 };
 
-extern HardwareSerial Serial0;
+extern HardwareSerial Serial;//Serial0;
 extern HardwareSerial Serial1;
 extern HardwareSerial Serial2;
 extern HardwareSerial Serial3;

cores/arduino/SPI.h

@@ -11,6 +11,11 @@
  * published by the Free Software Foundation.
  */
 
+ /*
+ * Arduino srl - www.arduino.org
+ * 2016 Jun 9: Edited Francesco Alessi (alfran) - francesco@arduino.org
+ */
+
 #ifndef _SPI_H_INCLUDED
 #define _SPI_H_INCLUDED
 

cores/arduino/WCharacter.h

@@ -19,7 +19,6 @@
 
 #ifndef Character_h
 #define Character_h
-//ciao
 #include <ctype.h>
 
 // WCharacter.h prototypes

cores/arduino/dac.c

@@ -79,7 +79,7 @@ void dac_init(const dac_dev *dev, uint32 flags) {
  *      DAC_CH1: Select channel 1
  *      DAC_CH2: Select channel 2
  * @param status Status:
- *      1:  enable buffer
+ *      1: enable buffer
  *      0: disable buffer
  */
 void dac_enable_buffer(const dac_dev *dev, uint32 flags, int status) {
@@ -124,7 +124,6 @@ void dac_write_channel(const dac_dev *dev, uint8 channel, uint16 val) {
  * @brief Enable a DAC channel
  * @param dev DAC device
  * @param channel channel to enable, either 1 or 2
- * @sideeffect May change pin mode of PA4 or PA5
  */
 void dac_enable_channel(const dac_dev *dev, uint8 channel) {
     /*

cores/arduino/delay.h

@@ -1,3 +1,21 @@
+/*
+  Copyright (c) 2014 Arduino.  All right reserved.
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
 /**
  * @file delay.h
  * @brief Delay implementation
@@ -41,4 +59,3 @@ static inline void delay_ns100(uint32 us) {
                  : "r0");
 }
 #endif
-

cores/arduino/rcc.c

@@ -223,7 +223,7 @@ void InitMCO1()
     gpio_set_mode(GPIOA_dev, 8, GPIO_MODE_AF | GPIO_OTYPE_PP | GPIO_OSPEED_100MHZ);
 }
 
-void SetupClock() // to be setted properly
+void SetupClock()
 {
 
   RCC_ClkInitTypeDef RCC_ClkInitStruct;
@@ -302,9 +302,6 @@ void SetupClock() // to be setted properly
   rcc_dev_clk_speed_table[RCC_APB1] = (SystemCoreClock/4);
 }
 
-// alfran ----- end
-
-
 void rcc_clk_init(rcc_sysclk_src sysclk_src,
                   rcc_pllsrc pll_src,
                   rcc_pll_multiplier pll_mul) {

cores/arduino/usb_serial.cpp

@@ -57,7 +57,7 @@ extern __IO uint32_t UserRxBufPtrIn;
 extern __IO uint32_t UserRxBufPtrOut;
 __IO  uint32_t usbEnableBlockingTx;
 
-USBSerial Serial;
+//USBSerial Serial;
 USBSerial SerialUSB;
 
 

cores/arduino/usb_serial.h

@@ -71,7 +71,7 @@ class USBSerial : public Stream {
 
 };
 
-extern USBSerial Serial;
+//extern USBSerial Serial;
 extern USBSerial SerialUSB;
 
 #endif