warp-docker

Run official Cloudflare WARP client in Docker.

Note

Cannot guarantee that the GOST and WARP client contained in the image are the latest versions. If necessary, please build your own image.

Usage

Start the container

To run the WARP client in Docker, just write the following content to docker-compose.yml and run docker-compose up -d.

version: '3'

services:
  warp:
    image: caomingjun/warp
    container_name: warp
    restart: always
    ports:
      - '1080:1080'
    environment:
      - WARP_SLEEP=2
      # - WARP_LICENSE_KEY= # optional
    cap_add:
      - NET_ADMIN
    sysctls:
      - net.ipv6.conf.all.disable_ipv6=0
      - net.ipv4.conf.all.src_valid_mark=1
    volumes:
      - ./data:/var/lib/cloudflare-warp

Try it out to see if it works:

curl --socks5-hostname 127.0.0.1:1080 https://cloudflare.com/cdn-cgi/trace

If the output contains warp=on or warp=plus, the container is working properly. If the output contains warp=off, it means that the container failed to connect to the WARP service.

Configuration

You can configure the container through the following environment variables:

• WARP_SLEEP: The time to wait for the WARP daemon to start, in seconds. The default is 2 seconds. If the time is too short, it may cause the WARP daemon to not start before using the proxy, resulting in the proxy not working properly. If the time is too long, it may cause the container to take too long to start. If your server has poor performance, you can increase this value appropriately.

• WARP_LICENSE_KEY: The license key of the WARP client, which is optional. If you have subscribed to WARP+ service, you can fill in the key in this environment variable. If you have not subscribed to WARP+ service, you can ignore this environment variable.

Data persistence: Use the host volume ./data to persist the data of the WARP client. You can change the location of this directory or use other types of volumes. If you modify the WARP_LICENSE_KEY, please delete the ./data directory so that the client can detect and register again.

Change proxy type

The container uses GOST to provide proxy, where the environment variable GOST_ARGS is used to pass parameters to GOST. The default is -L :1080, that is, to listen on port 1080 in the container at the same time through HTTP and SOCKS5 protocols. If you want to have UDP support or use advanced features provided by other protocols, you can modify this parameter. For more information, refer to GOST documentation.

If you modify the port number, you may also need to modify the port mapping in the docker-compose.yml.

Health check

The health check of the container will verify if the WARP client inside the container is working properly. If the check fails, the container will automatically restart. Specifically, 10 seconds after starting, a check will be performed every 15 seconds. If the inspection fails for 3 consecutive times, the container will be marked as unhealthy and trigger an automatic restart.

If BETA_FIX_HOST_CONNECTIVITY=1 is passed, host connectivity check will be added to the health check. If the check fails, the container will automatically fix it. This may prevent you from accessing certain intranet services of your organization, as the docker network subnet may conflict with the addresses of these services. This is a beta feature and may not work in all cases. If you encounter any issues, please report them.

If you don't want the container to restart automatically, you can remove restart: always from the docker-compose.yml. You can also modify the parameters of the health check through the docker-compose.yml.

Setting up as WARP connector

If you want to setup WARP Connector

Note

If you have already started the container, stop it and delete the data directory.

1. Create mdm.xml as explained in Cloudflare WARP Connector step 4
2. Mount the mdm.xml to path /var/lib/cloudflare-warp/mdm.xml
3. Start the container

services:
  warp:
    image: caomingjun/warp
    container_name: warp
    restart: always
    ports:
      - '1080:1080'
    environment:
      - WARP_SLEEP=2
      # - WARP_LICENSE_KEY= # optional
    cap_add:
      - NET_ADMIN
    sysctls:
      - net.ipv6.conf.all.disable_ipv6=0
      - net.ipv4.conf.all.src_valid_mark=1
      - net.ipv4.ip_forward=1
    volumes:
      - ./data:/var/lib/cloudflare-warp
      - ./config/warp/mdm.xml:/var/lib/cloudflare-warp/mdm.xml

Sample Docker Compose File

Use with Cloudflare Zero Trust

If you want to use the WARP client with Cloudflare Zero Trust, just start the container without specifying license key, use docker exec -it warp bash to get into the container and follow these steps:

1. warp-cli registration delete to delete current registration
2. warp-cli teams-enroll <your-team-name> to enroll the device
3. Open the link in the output in a browser and follow the instructions to complete the registration
4. On the success page, right-click and select View Page Source.
5. Find the HTML metadata tag that contains the token. For example, <meta http-equiv="refresh" content"=0;url=com.cloudflare.warp://acmecorp.cloudflareaccess.com/auth?token=yeooilknmasdlfnlnsadfojDSFJndf_kjnasdf..." />
6. Copy the URL field: com.cloudflare.warp://<your-team-name>.cloudflareaccess.com/auth?token=<your-token>
7. In the terminal, run the following command using the URL obtained in the previous step: warp-cli registration token com.cloudflare.warp://<your-team-name>.cloudflareaccess.com/auth?token=<your-token>. If you get an API error, then the token has expired. Generate a new one by refreshing the web page and quickly grab the new token from the page source.
8. warp-cli connect to reconnect using new registration.
9. Wait untill warp-cli status shows Connected.
10. Try curl --socks5-hostname 127.0.0.1:1080 https://cloudflare.com/cdn-cgi/trace to verify the connection.

This is only needed for the first time. After the device is enrolled, the registration information will be stored in the ./data directory, if you don't delete them, the container will automatically use the registration information to connect to the WARP service after restart or recreate.

Use other versions

The tag of docker image is in the format of {WARP_VERSION}-{GOST_VERSION}, for example, 2023.10.120-2.11.5 means that the WARP client version is 2023.10.120 and the GOST version is 2.11.5. If you want to use other versions, you can specify the tag in the docker-compose.yml.

You can also use the latest tag to use the latest version of the image.

Note

You can access the image built by a certain commit by using the tag {WARP_VERSION}-{GOST_VERSION}-{COMMIT_SHA}. Not all commits have images built.

Note

Not all version combinations are available. Do check the list of tags in Docker Hub before you use one. If the version you want is not available, you can build your own image.

Build

You can use Github Actions to build the image yourself.

1. Fork this repository.
2. Create necessary variables and secrets in the repository settings:
   1. variable REGISTRY: for example, docker.io (Docker Hub)
   2. variable IMAGE_NAME: for example, caomingjun/warp
   3. variable DOCKER_USERNAME: for example, caomingjun
   4. secret DOCKER_PASSWORD: generate a token in Docker Hub and fill in the token
3. Manually trigger the workflow Build and push image in the Actions tab.

This will build the image with the latest version of WARP client and GOST and push it to the specified registry. You can also specify the version of GOST by giving input to the workflow. Building image with custom WARP client version is not supported yet.

If you want to build the image locally, you can use .github/workflows/build-publish.yml as a reference.

Common problems

Proxying UDP or even ICMP traffic

The default GOST_ARGS is -L :1080, which provides HTTP and SOCKS5 proxy. If you want to proxy UDP or even ICMP traffic, you need to change the GOST_ARGS. Read the GOST documentation for more information.

How to connect from another container

You may want to use the proxy from another container and find that you cannot connect to 127.0.0.1:1080 in that container. This is because the docker-compose.yml only maps the port to the host, not to other containers. To solve this problem, you can use the service name as the hostname, for example, warp:1080. You also need to put the two containers in the same docker network.

Container runs well but cannot connect from host

This issue often arises when using Zero Trust. You may find that you can run curl --socks5-hostname 127.0.0.1:1080 https://cloudflare.com/cdn-cgi/trace inside the container, but cannot run this command outside the container (from host or another container). This is because Cloudflare WARP client is grabbing the traffic. There are three solutions.

If you have permission to edit the split tunnel settings, you can add the subnet of your docker network to the split tunnel.

If you don't have the permission, use docker exec warp-test warp-cli --accept-tos tunnel dump to list your current excluded subnets, and carefully select one of them to set as the docker network subnet. The subnet you choose should be within the private address range; using a public address will prevent you from accessing certain services properly. This solution can be quite brittle and manual as you may need to change the subnet when your organization changes the excluded subnets, but it won't cause any other problems.

The third solution is to pass environment variable BETA_FIX_HOST_CONNECTIVITY=1 to container, the container will add checks for host connectivity into healthchecks and automatically fix it if necessary. This may prevent you from accessing certain intranet services of your organization, as the docker network subnet may conflict with the addresses of these services. This is a beta feature and may not work in all cases. If you encounter any issues, please report them.

Further reading

Read in my blog post.

NEW

docker run --name=warp -d  \
   --cap-add NET_ADMIN \
   -e WARP_SLEEP=2 \
   -e REGISTER_WHEN_MDM_EXISTS=true \
   -v /root/warp-docker/data:/var/lib/cloudflare-warp \
   -v /root/warp-docker/enable_masque_mdm.xml:/var/lib/cloudflare-warp/mdm.xml \
   -v /dev/net/:/dev/net/ \
   --net warp-docker_default \
   --network-alias warp -p 1080:1080 \
   --sysctl net.ipv6.conf.all.disable_ipv6=0 \
   --sysctl net.ipv4.conf.all.src_valid_mark=1 \
   --restart always warp

curl --socks5-hostname 127.0.0.1:1080 https://chat.openai.com/cdn-cgi/trace