Armbian Configuration Utility

Utility for configuring your board, adjusting services, and installing applications. It comes with Armbian by default.

To start the Armbian configuration utility, use the following command:

sudo armbian-config

System
- S01 - Enable Armbian kernel/firmware upgrades
- S02 - Disable Armbian kernel upgrades
- S03 - Edit the boot environment
- S04 - Install Linux headers
- S05 - Remove Linux headers
- S06 - Install to internal storage
- S07.1 - Manage SSH login options
- S17 - Change shell system wide to BASH
- S18 - Change shell system wide to ZSH
- S19 - Switch to rolling release
- S20 - Switch to stable release
- S21 - Enable read only filesystem
- S22 - Disable read only filesystem
- S23 - Adjust welcome screen (motd)
- S24 - Install alternative kernels
- S25 - Distribution upgrades
Network
- N01 - Configure network interfaces
- N15 - Install Bluetooth support
- N16 - Remove Bluetooth support
- N17 - Bluetooth Discover
- N18 - Toggle system IPv6/IPv4 internet protocol
Localisation
- L00 - Change Global timezone (WIP)
- L01 - Change Locales reconfigure the language and character set
- L02 - Change Keyboard layout
- L03 - Change APT mirrors
Software
- Desktops - Install Desktop Environments
- Netconfig - Network tools
- DevTools - Development
- Benchy - System benchmaking and diagnostics
- Containers - Containerlization and Virtual Machines
- Media - Media Servers and Editors
- Management - Remote Management tools
Help
- H00 - About This system. (WIP)
- H02 - List of Config function(WIP)

Install

Armbian installation

sudo apt install armbian-config

3rd party Debian based distributions

{
	sudo wget https://apt.armbian.com/armbian.key -O key
	sudo gpg --dearmor < key | sudo tee /usr/share/keyrings/armbian.gpg > /dev/null
	sudo chmod go+r /usr/share/keyrings/armbian.gpg
	sudo echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/armbian.gpg] http://apt.armbian.com $(lsb_release -cs) main  $(lsb_release -cs)-utils  $(lsb_release -cs)-desktop" | sudo tee /etc/apt/sources.list.d/armbian.list
	sudo apt update
	sudo apt install armbian-config
}

CLI options

Command line options.

Use:

armbian-config --help

Outputs:


  System - System wide and admin settings (x86_64)
    --cmd S01 - Enable Armbian kernel/firmware upgrades
    --cmd S02 - Disable Armbian kernel upgrades
    --cmd S03 - Edit the boot environment
    --cmd S04 - Install Linux headers
    --cmd S05 - Remove Linux headers
    --cmd S06 - Install to internal storage
    S07.1 - Manage SSH login options
	--cmd S07 - Disable root login
	--cmd S08 - Enable root login
	--cmd S09 - Disable password login
	--cmd S10 - Enable password login
	--cmd S11 - Disable Public key authentication login
	--cmd S12 - Enable Public key authentication login
	--cmd S13 - Disable OTP authentication
	--cmd S14 - Enable OTP authentication
	--cmd S15 - Generate new OTP authentication QR code
	--cmd S16 - Show OTP authentication QR code
	--cmd S30 - Disable last login banner
	--cmd S31 - Enable last login banner
    --cmd S17 - Change shell system wide to BASH
    --cmd S18 - Change shell system wide to ZSH
    --cmd S19 - Switch to rolling release
    --cmd S20 - Switch to stable release
    --cmd S21 - Enable read only filesystem
    --cmd S22 - Disable read only filesystem
    --cmd S23 - Adjust welcome screen (motd)
    --cmd S24 - Install alternative kernels
    S25 - Distribution upgrades
	--cmd S26 - Upgrade to latest stable / LTS
	--cmd S27 - Upgrade to rolling unstable

  Network - Fixed and wireless network settings (eth0)
    N01 - Configure network interfaces
	--cmd N02 - Add interface
	--cmd N03 - Revert to defaults
	--cmd N04 - Show draft configuration
	--cmd N05 - Apply changes
	--cmd N06 - Show active status
    --cmd N15 - Install Bluetooth support
    --cmd N16 - Remove Bluetooth support
    --cmd N17 - Bluetooth Discover
    --cmd N18 - Toggle system IPv6/IPv4 internet protocol

  Localisation - Localisation (C.UTF-8)
    --cmd L00 - Change Global timezone (WIP)
    --cmd L01 - Change Locales reconfigure the language and character set
    --cmd L02 - Change Keyboard layout
    --cmd L03 - Change APT mirrors

  Software - Run/Install 3rd party applications (Update the package lists.)
    Desktops - Install Desktop Environments
	--cmd SW02 - Install XFCE desktop
	--cmd SW03 - Install Gnome desktop
	--cmd SW04 - Install i3-wm desktop
	--cmd SW05 - Install Cinnamon desktop
	--cmd SW06 - Install kde-neon desktop
    Netconfig - Network tools
	--cmd SW08 - Install realtime console network usage monitor (nload)
	--cmd SW09 - Remove realtime console network usage monitor (nload)
	--cmd SW10 - Install bandwidth measuring tool (iperf3)
	--cmd SW11 - Remove bandwidth measuring tool (iperf3)
	--cmd SW12 - Install IP LAN monitor (iptraf-ng)
	--cmd SW13 - Remove IP LAN monitor (iptraf-ng)
	--cmd SW14 - Install hostname broadcast via mDNS (avahi-daemon)
	--cmd SW15 - Remove hostname broadcast via mDNS (avahi-daemon)
    DevTools - Development
	--cmd SW17 - Install tools for cloning and managing repositories (git)
	--cmd SW18 - Remove tools for cloning and managing repositories (git)
    --cmd Benchy - System benchmaking and diagnostics
    Containers - Containerlization and Virtual Machines
	--cmd SW25 - Install Docker Minimal
	--cmd SW26 - Install Docker Engine
	--cmd SW27 - Remove Docker
	--cmd SW28 - Purge all Docker images, containers, and volumes
    Media - Media Servers and Editors
	--cmd SW21 - Install Plex Media server
	--cmd SW22 - Remove Plex Media server
	--cmd SW23 - Install Emby server
	--cmd SW24 - Remove Emby server
    Management - Remote Management tools
	--cmd M00 - Install Cockpit web-based management tool
	--cmd M01 - Purge Cockpit web-based management tool
	--cmd M02 - Start Cockpit Service
	--cmd M03 - Stop Cockpit Service

  Help - About this app
    --cmd H00 - About This system. (WIP)
    --cmd H02 - List of Config function(WIP)

Legacy options

Backward Compatible options.

Use:

armbian-config main=Help

Outputs:

Legacy Options (Backward Compatible)
Please use 'armbian-config --help' for more information.

Usage:  armbian-configng main=[arguments] selection=[options]

	armbian-configng main=System selection=Headers          -  Install headers:
	armbian-configng main=System selection=Headers_remove   -  Remove headers:

Development

Development is divided into three sections:

Click for more info:

Jobs / JSON Object

A list of the jobs defined in the Jobs file.

### S01

Enable Armbian kernel/firmware upgrades

Jobs:

armbian_fw_manipulate unhold


### S02

Disable Armbian kernel upgrades

Jobs:

armbian_fw_manipulate hold


### S03

Edit the boot environment

Jobs:

nano /boot/armbianEnv.txt


### S04

Install Linux headers

Jobs:

Headers_install


### S05

Remove Linux headers

Jobs:

Headers_remove


### S06

Install to internal storage

Jobs:

armbian-install


### S07.1

Manage SSH login options

Jobs:

No commands available


### S17

Change shell system wide to BASH

Jobs:

export BASHLOCATION=$(grep /bash$ /etc/shells | tail -1) sed -i "s|^SHELL=.|SHELL=${BASHLOCATION}|" /etc/default/useradd sed -i "s|^DSHELL=.|DSHELL=${BASHLOCATION}|" /etc/adduser.conf apt_install_wrapper apt-get -y purge armbian-zsh zsh-common zsh tmux update_skel awk -F'[/:]' '{if ($3 >= 1000 && $3 != 65534 || $3 == 0) print $1}' /etc/passwd | xargs -L1 chsh -s $(grep /bash$ /etc/shells | tail -1)


### S18

Change shell system wide to ZSH

Jobs:

export ZSHLOCATION=$(grep /zsh$ /etc/shells | tail -1) sed -i "s|^SHELL=.|SHELL=${ZSHLOCATION}|" /etc/default/useradd sed -i "s|^DSHELL=.|DSHELL=${ZSHLOCATION}|" /etc/adduser.conf apt_install_wrapper apt-get -y install armbian-zsh zsh-common zsh tmux update_skel awk -F'[/:]' '{if ($3 >= 1000 && $3 != 65534 || $3 == 0) print $1}' /etc/passwd | xargs -L1 chsh -s $(grep /zsh$ /etc/shells | tail -1)


### S19

Switch to rolling release

Jobs:

set_rolling


### S20

Switch to stable release

Jobs:

set_stable


### S21

Enable read only filesystem

Jobs:

manage_overlayfs enable


### S22

Disable read only filesystem

Jobs:

manage_overlayfs disable


### S23

Adjust welcome screen (motd)

Jobs:

adjust_motd


### S24

Install alternative kernels

Jobs:

switch_kernels


### S25

Distribution upgrades

Jobs:

No commands available


### N01

Configure network interfaces

Jobs:

No commands available


### N15

Install Bluetooth support

Jobs:

see_current_apt debconf-apt-progress -- apt-get -y install bluetooth bluez bluez-tools check_if_installed xserver-xorg && debconf-apt-progress -- apt-get -y --no-install-recommends install pulseaudio-module-bluetooth blueman


### N16

Remove Bluetooth support

Jobs:

see_current_apt debconf-apt-progress -- apt-get -y remove bluetooth bluez bluez-tools check_if_installed xserver-xorg && debconf-apt-progress -- apt-get -y remove pulseaudio-module-bluetooth blueman debconf-apt-progress -- apt -y -qq autoremove


### N17

Bluetooth Discover

Jobs:

connect_bt_interface


### N18

Toggle system IPv6/IPv4 internet protocol

Jobs:

toggle_ipv6 | show_infobox


### L00

Change Global timezone (WIP)

Jobs:

dpkg-reconfigure tzdata


### L01

Change Locales reconfigure the language and character set

Jobs:

dpkg-reconfigure locales source /etc/default/locale ; sed -i "s/^LANGUAGE=.*/LANGUAGE=$LANG/" /etc/default/locale export LANGUAGE=$LANG


### L02

Change Keyboard layout

Jobs:

dpkg-reconfigure keyboard-configuration ; setupcon update-initramfs -u


### L03

Change APT mirrors

Jobs:

get_user_continue "This is only a frontend test" process_input


### Desktops

Install Desktop Environments

Jobs:

No commands available


### Netconfig

Network tools

Jobs:

No commands available


### DevTools

Development

Jobs:

No commands available


### Benchy

System benchmaking and diagnostics

Jobs:

see_monitoring


### Containers

Containerlization and Virtual Machines

Jobs:

No commands available


### Media

Media Servers and Editors

Jobs:

No commands available


### Management

Remote Management tools

Jobs:

No commands available


### H00

About This system. (WIP)

Jobs:

show_message <<< "This app is to help execute procedures to configure your system

Some options may not work on manually modified systems"


### H02

List of Config function(WIP)

Jobs:

show_message <<< see_use

Jobs API / Helper Functions

These helper functions facilitate various operations related to job management, such as creation, updating, deletion, and listing of jobs, acting as a practical API for developers.

Description	Example	Credit
Generate a Help message legacy cli commands.	see_cli_legacy	Joey Turner
Run time variables Migrated procedures from Armbian config.	set_runtime_variables	Igor Pecovnik
Toggle SSH lastlog	toggle_ssh_lastlog	tearran
Set Armbian to rolling release	set_rolling	Tearran
Generate this markdown table of all module_options	see_function_table_md	Joey Turner
Switching to alternative kernels		Igor
Set Armbian root filesystem to read only	manage_overlayfs enable	disable
Display a menu from pipe	show_menu <<< armbianmonitor -h ;	Joey Turner
Build the main menu from a object	generate_top_menu 'json_data'	Joey Turner
Migrated procedures from Armbian config.	is_package_manager_running	Igor Pecovnik
Migrated procedures from Armbian config.	check_desktop	Igor Pecovnik
Generate Document files.	generate_readme	Joey Turner
Needed by generate_menu		Joey Turner
Display a Yes/No dialog box and process continue/exit	get_user_continue 'Do you wish to continue?' process_input	Joey Turner
Display a message box	show_message <<< 'hello world'	Joey Turner
Migrated procedures from Armbian config.	connect_bt_interface	Igor Pecovnik
Menu for armbianmonitor features	see_monitoring	Joey Turner
Show or generate QR code for Google OTP	qr_code generate	Igor Pecovnik
Check if kernel headers are installed	are_headers_installed	Gunjan Gupta
Check when apt list was last updated and suggest updating or update	see_current_apt
Migrated procedures from Armbian config.	check_if_installed nano	Igor Pecovnik
Generate 'Armbian CPU logo' SVG for document file.	generate_svg	Joey Turner
Remove Linux headers	Headers_remove	Joey Turner
Update submenu descriptions based on conditions	update_submenu_data	Joey Turner
sanitize input cli	sanitize_input
Check if a domain is reachable via IPv4 and IPv6	check_ip_version google.com	Joey Turner
Migrated procedures from Armbian config.	set_header_remove	Igor Pecovnik
Generate a submenu from a parent_id	generate_menu 'parent_id'	Joey Turner
Generate a markdown list json objects using jq.	see_jq_menu_list	Joey Turner
Generate jobs from JSON file.	generate_jobs_from_json	Joey Turner
Install kernel headers	is_package_manager_running	Joey Turner
Toggle IPv6 on or off	toggle_ipv6	Joey Turner
Adjust welcome screen (motd)		igorpecovnik
Generate JSON-like object file.	generate_json	Joey Turner
Install DE	install_de	Igor Pecovnik
Install wrapper	apt_install_wrapper apt-get -y purge armbian-zsh	igorpecovnik
Netplan wrapper	network_config	Igor Pecovnik
Change the background color of the terminal or dialog box	set_colors 0-7	Joey Turner
Serve the edit and debug server.	serve_doc	Joey Turner
Update JSON data with system information	update_json_data	Joey Turner
pipeline strings to an infobox	show_infobox <<< 'hello world' ;	Joey Turner
Parse json to get list of desired menu or submenu items	parse_menu_items 'menu_options_array'	Gunjan Gupta
Show the usage of the functions.	see_use	Joey Turner
Generate a Help message for cli commands.	see_cmd_list [catagory]	Joey Turner
Revert network config back to Armbian defaults	default_network_config	Igor Pecovnik
freeze/unhold/reinstall armbian related packages.	armbian_fw_manipulate unhold	freeze
Check the internet connection with fallback DNS	see_ping	Joey Turner
Upgrade to next stable or rolling release	release_upgrade stable verify	Igor Pecovnik
Install docker from a repo using apt	install_docker engine	Kat Schwarz
Set Armbian to stable release	set_stable	Tearran
Secure version of get_user_continue	get_user_continue_secure 'Do you wish to continue?' process_input	Joey Turner

Runtime / Board Statuses

(WIP)

This section outlines the runtime environment to check configurations and statuses for dynamically managing jobs based on JSON data.

(WIP)

Testing and contributing

Get Development

Install the dependencies:

sudo apt install git jq whiptail

Get Development and contribute:

{
git clone https://github.com/armbian/configng
cd configng
./armbian-configng --help
}

Install and test Development deb:

{
	sudo apt install whiptail
	latest_release=$(curl -s https://api.github.com/repos/armbian/configng/releases/latest)
	deb_url=$(echo "$latest_release" | jq -r '.assets[] | select(.name | endswith(".deb")) | .browser_download_url')
	curl -LO "$deb_url"
	deb_file=$(echo "$deb_url" | awk -F"/" '{print $NF}')
	sudo dpkg -i "$deb_file"
	sudo dpkg --configure -a
	sudo apt --fix-broken install
}

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

DOCUMENTATION.md

DOCUMENTATION.md

Armbian Configuration Utility

System

Network

Localisation

Software

Help

Install

CLI options

Legacy options

Development

Testing and contributing

Files

DOCUMENTATION.md

Latest commit

History

DOCUMENTATION.md

File metadata and controls

Armbian Configuration Utility

System

Network

Localisation

Software

Help

Install

CLI options

Legacy options

Development

Testing and contributing