Merge PR #529 "Use consistent formatting of all code" from per1234

Use consistent formatting of all code

Author: robsoncouto

AsciiDoc_sample/Reference_Terms/AsciiDoc_Template-Single_Entity.adoc

@@ -76,13 +76,11 @@ int ledPin = 9;      // LED connected to digital pin 9
 int analogPin = 3;   // potentiometer connected to analog pin 3
 int val = 0;         // variable to store the read value
 
-void setup()
-{
+void setup() {
   pinMode(ledPin, OUTPUT);   // sets the pin as output
 }
 
-void loop()
-{
+void loop() {
   val = analogRead(analogPin);   // read the input pin
   analogWrite(ledPin, val / 4);  // analogRead values go from 0 to 1023, analogWrite values from 0 to 255
 }

Language/Functions/Advanced IO/pulseIn.adoc

@@ -60,14 +60,12 @@ The example prints the time duration of a pulse on pin 7.
 int pin = 7;
 unsigned long duration;
 
-void setup()
-{
+void setup() {
   Serial.begin(9600);
   pinMode(pin, INPUT);
 }
 
-void loop()
-{
+void loop() {
   duration = pulseIn(pin, HIGH);
   Serial.println(duration);
 }

Language/Functions/Analog IO/analogRead.adoc

@@ -65,19 +65,17 @@ The code reads the voltage on analogPin and displays it.
 
 [source,arduino]
 ----
-int analogPin = A3;     // potentiometer wiper (middle terminal) connected to analog pin 3
-                       // outside leads to ground and +5V
-int val = 0;           // variable to store the value read
+int analogPin = A3; // potentiometer wiper (middle terminal) connected to analog pin 3
+                    // outside leads to ground and +5V
+int val = 0;  // variable to store the value read
 
-void setup()
-{
-  Serial.begin(9600);              //  setup serial
+void setup() {
+  Serial.begin(9600);           //  setup serial
 }
 
-void loop()
-{
-  val = analogRead(analogPin);     // read the input pin
-  Serial.println(val);             // debug value
+void loop() {
+  val = analogRead(analogPin);  // read the input pin
+  Serial.println(val);          // debug value
 }
 ----
 [%hardbreaks]

Language/Functions/Analog IO/analogWrite.adoc

@@ -62,15 +62,13 @@ int ledPin = 9;      // LED connected to digital pin 9
 int analogPin = 3;   // potentiometer connected to analog pin 3
 int val = 0;         // variable to store the read value
 
-void setup()
-{
-  pinMode(ledPin, OUTPUT);   // sets the pin as output
+void setup() {
+  pinMode(ledPin, OUTPUT);  // sets the pin as output
 }
 
-void loop()
-{
-  val = analogRead(analogPin);   // read the input pin
-  analogWrite(ledPin, val / 4);  // analogRead values go from 0 to 1023, analogWrite values from 0 to 255
+void loop() {
+  val = analogRead(analogPin);  // read the input pin
+  analogWrite(ledPin, val / 4); // analogRead values go from 0 to 1023, analogWrite values from 0 to 255
 }
 ----
 [%hardbreaks]

Language/Functions/Characters/isAlpha.adoc

@@ -50,15 +50,12 @@ isAlpha(thisChar)
 
 [source,arduino]
 ----
-if (isAlpha(myChar))      // tests if myChar is a letter
-{
-	Serial.println("The character is a letter");
+if (isAlpha(myChar)) {  // tests if myChar is a letter
+  Serial.println("The character is a letter");
 }
-else
-{
-	Serial.println("The character is not a letter");
+else {
+  Serial.println("The character is not a letter");
 }
-
 ----
 
 --

Language/Functions/Characters/isAlphaNumeric.adoc

@@ -50,15 +50,12 @@ isAlphaNumeric(thisChar)
 
 [source,arduino]
 ----
-if (isAlphaNumeric(myChar))      // tests if myChar isa letter or a number
-{
-	Serial.println("The character is alphanumeric");
+if (isAlphaNumeric(myChar)) { // tests if myChar isa letter or a number
+  Serial.println("The character is alphanumeric");
 }
-else
-{
-	Serial.println("The character is not alphanumeric");
+else {
+  Serial.println("The character is not alphanumeric");
 }
-
 ----
 
 --

Language/Functions/Characters/isAscii.adoc

@@ -50,15 +50,12 @@ isAscii(thisChar)
 
 [source,arduino]
 ----
-if (isAscii(myChar))      // tests if myChar is an Ascii character
-{
-	Serial.println("The character is Ascii");
+if (isAscii(myChar)) {  // tests if myChar is an Ascii character
+  Serial.println("The character is Ascii");
 }
-else
-{
-	Serial.println("The character is not Ascii");
+else {
+  Serial.println("The character is not Ascii");
 }
-
 ----
 
 --

Language/Functions/Characters/isControl.adoc

@@ -50,15 +50,12 @@ isControl(thisChar)
 
 [source,arduino]
 ----
-if (isControl(myChar))      // tests if myChar is a control character
-{
-	Serial.println("The character is a control character");
+if (isControl(myChar)) {  // tests if myChar is a control character
+  Serial.println("The character is a control character");
 }
-else
-{
-	Serial.println("The character is not a control character");
+else {
+  Serial.println("The character is not a control character");
 }
-
 ----
 
 --

Language/Functions/Characters/isDigit.adoc

@@ -50,15 +50,12 @@ isDigit(thisChar)
 
 [source,arduino]
 ----
-if (isDigit(myChar))      // tests if myChar is a digit
-{
-	Serial.println("The character is a number");
+if (isDigit(myChar)) {  // tests if myChar is a digit
+  Serial.println("The character is a number");
 }
-else
-{
-	Serial.println("The character is not a number");
+else {
+  Serial.println("The character is not a number");
 }
-
 ----
 
 --

Language/Functions/Characters/isGraph.adoc

@@ -50,15 +50,12 @@ isGraph(thisChar)
 
 [source,arduino]
 ----
-if (isGraph(myChar))      // tests if myChar is a printable character but not a blank space.
-{
-	Serial.println("The character is printable");
+if (isGraph(myChar)) {  // tests if myChar is a printable character but not a blank space.
+  Serial.println("The character is printable");
 }
-else
-{
-	Serial.println("The character is not printable");
+else {
+  Serial.println("The character is not printable");
 }
-
 ----
 
 --