Fix malformed URLs in sketch comments

per1234 · per1234 · commit 222092cb6d75 · 2023-02-06T23:01:27.000-08:00
It appears an incorrectly performed replace operation corrupted the URLs in the sketch header comments that link to the
associated tutorial page.
diff --git a/content/built-in-examples/02.digital/toneMelody/toneMelody.md b/content/built-in-examples/02.digital/toneMelody/toneMelody.md
@@ -54,7 +54,7 @@ The main sketch is as follows:
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/Tone
+  https://www.arduino.cc/en/Tutorial/Tone
 
 */
 
diff --git a/content/built-in-examples/02.digital/toneMultiple/toneMultiple.md b/content/built-in-examples/02.digital/toneMultiple/toneMultiple.md
@@ -64,7 +64,7 @@ Here's the main sketch:
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/Tone4
+  https://www.arduino.cc/en/Tutorial/Tone4
 
 */
 
diff --git a/content/built-in-examples/02.digital/tonePitchFollower/tonePitchFollower.md b/content/built-in-examples/02.digital/tonePitchFollower/tonePitchFollower.md
@@ -74,7 +74,7 @@ The sketch is as follows:
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/Tone2
+  https://www.arduino.cc/en/Tutorial/Tone2
 
 */
 
diff --git a/content/built-in-examples/03.analog/AnalogInOutSerial/AnalogInOutSerial.md b/content/built-in-examples/03.analog/AnalogInOutSerial/AnalogInOutSerial.md
@@ -79,7 +79,7 @@ The newly mapped sensor data is then output to the `analogOutPin` dimming or bri
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/AnalogInOutSerial
+  https://www.arduino.cc/en/Tutorial/AnalogInOutSerial
 
 */
 
diff --git a/content/built-in-examples/03.analog/AnalogWriteMega/AnalogWriteMega.md b/content/built-in-examples/03.analog/AnalogWriteMega/AnalogWriteMega.md
@@ -81,7 +81,7 @@ This loop subtracts a point from the brightness variable, dimming the LED back d
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/AnalogWriteMega
+  https://www.arduino.cc/en/Tutorial/AnalogWriteMega
 
 */
 
diff --git a/content/built-in-examples/03.analog/Fading/Fading.md b/content/built-in-examples/03.analog/Fading/Fading.md
@@ -64,7 +64,7 @@ In this example two loops are executed one after the other to increase and then
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/Fading
+  https://www.arduino.cc/en/Tutorial/Fading
 
 */
 
diff --git a/content/built-in-examples/04.communication/Dimmer/Dimmer.md b/content/built-in-examples/04.communication/Dimmer/Dimmer.md
@@ -72,7 +72,7 @@ Connect the 220 ohm current limiting resistor to digital pin 9, with an LED in s
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/Dimmer
+  https://www.arduino.cc/en/Tutorial/Dimmer
 
 */
 
diff --git a/content/built-in-examples/04.communication/PhysicalPixel/PhysicalPixel.md b/content/built-in-examples/04.communication/PhysicalPixel/PhysicalPixel.md
@@ -73,7 +73,7 @@ Many Arduino boards have a built-in LED connected to pin 13; if your board has n
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/PhysicalPixel
+  https://www.arduino.cc/en/Tutorial/PhysicalPixel
 
 */
 
diff --git a/content/built-in-examples/04.communication/SerialCallResponse/SerialCallResponse.md b/content/built-in-examples/04.communication/SerialCallResponse/SerialCallResponse.md
@@ -84,7 +84,7 @@ Connect analog sensors to analog input pin 0 and 1 with 10K ohm resistors used a
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/SerialCallResponse
+  https://www.arduino.cc/en/Tutorial/SerialCallResponse
 
 */
 
diff --git a/content/built-in-examples/04.communication/VirtualColorMixer/VirtualColorMixer.md b/content/built-in-examples/04.communication/VirtualColorMixer/VirtualColorMixer.md
@@ -75,7 +75,7 @@ The sensor values are sent from the Arduino to the computer as [ASCII-encoded de
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/VirtualColorMixer
+  https://www.arduino.cc/en/Tutorial/VirtualColorMixer
 
 */
 
diff --git a/content/built-in-examples/05.control-structures/Arrays/Arrays.md b/content/built-in-examples/05.control-structures/Arrays/Arrays.md
@@ -76,7 +76,7 @@ Connect six LEDs, with 220 ohm resistors in series, to digital pins 2-7 on your
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/Array
+  https://www.arduino.cc/en/Tutorial/Array
 
 */
 
diff --git a/content/built-in-examples/05.control-structures/SwitchCase2/SwitchCase2.md b/content/built-in-examples/05.control-structures/SwitchCase2/SwitchCase2.md
@@ -71,7 +71,7 @@ To make this sketch work, your board must be connected to your computer. In the
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/SwitchCase2
+  https://www.arduino.cc/en/Tutorial/SwitchCase2
 
 */
 
diff --git a/content/built-in-examples/05.control-structures/WhileStatementConditional/WhileStatementConditional.md b/content/built-in-examples/05.control-structures/WhileStatementConditional/WhileStatementConditional.md
@@ -83,7 +83,7 @@ Connect your analog sensor (e.g. potentiometer, light sensor) on analog input 2
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/WhileLoop
+  https://www.arduino.cc/en/Tutorial/WhileLoop
 
 */
 
diff --git a/content/built-in-examples/06.sensors/ADXL3xx/ADXL3xx.md b/content/built-in-examples/06.sensors/ADXL3xx/ADXL3xx.md
@@ -103,7 +103,7 @@ This solution allows the [breakout boards from Sparkfun](http://www.sparkfun.com
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/ADXL3xx
+  https://www.arduino.cc/en/Tutorial/ADXL3xx
 
 */
 
diff --git a/content/built-in-examples/06.sensors/Memsic2125/Memsic2125.md b/content/built-in-examples/06.sensors/Memsic2125/Memsic2125.md
@@ -73,7 +73,7 @@ Open the Serial Monitor of the Arduino Software (IDE) to see the values read fro
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/Memsic2125
+  https://www.arduino.cc/en/Tutorial/Memsic2125
 
 */
 
diff --git a/content/built-in-examples/08.strings/CharacterAnalysis/CharacterAnalysis.md b/content/built-in-examples/08.strings/CharacterAnalysis/CharacterAnalysis.md
@@ -86,7 +86,7 @@ Open the serial monitor window of the Arduino Software (IDE) and type in a singl
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/CharacterAnalysis
+  https://www.arduino.cc/en/Tutorial/CharacterAnalysis
 
 */
 
diff --git a/content/built-in-examples/08.strings/StringAdditionOperator/StringAdditionOperator.md b/content/built-in-examples/08.strings/StringAdditionOperator/StringAdditionOperator.md
@@ -110,7 +110,7 @@ Here's a working example of several different concatenation examples :
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/StringAdditionOperator
+  https://www.arduino.cc/en/Tutorial/StringAdditionOperator
 
 */
 
diff --git a/content/built-in-examples/08.strings/StringLength/StringLength.md b/content/built-in-examples/08.strings/StringLength/StringLength.md
@@ -38,7 +38,7 @@ There is no circuit for this example, though your board must be connected to you
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/StringLengthTrim
+  https://www.arduino.cc/en/Tutorial/StringLengthTrim
 
 */
 
diff --git a/content/built-in-examples/08.strings/StringLengthTrim/StringLengthTrim.md b/content/built-in-examples/08.strings/StringLengthTrim/StringLengthTrim.md
@@ -38,7 +38,7 @@ There is no circuit for this example, though your board must be connected to you
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/StringLengthTrim
+  https://www.arduino.cc/en/Tutorial/StringLengthTrim
 */
 
 void setup() {
diff --git a/content/built-in-examples/08.strings/StringStartsWithEndsWith/StringStartsWithEndsWith.md b/content/built-in-examples/08.strings/StringStartsWithEndsWith/StringStartsWithEndsWith.md
@@ -57,7 +57,7 @@ If you look for a position that's outside the range of the string,you'll get unp
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/StringStartsWithEndsWith
+  https://www.arduino.cc/en/Tutorial/StringStartsWithEndsWith
 */
 
 void setup() {
diff --git a/content/built-in-examples/09.usb/ButtonMouseControl/ButtonMouseControl.md b/content/built-in-examples/09.usb/ButtonMouseControl/ButtonMouseControl.md
@@ -74,7 +74,7 @@ Connect your board to your computer with a micro-USB cable. The buttons are conn
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/ButtonMouseControl
+  https://www.arduino.cc/en/Tutorial/ButtonMouseControl
 
 */
 
diff --git a/content/built-in-examples/09.usb/KeyboardLogout/KeyboardLogout.md b/content/built-in-examples/09.usb/KeyboardLogout/KeyboardLogout.md
@@ -73,7 +73,7 @@ While the sketch is running, pressing the button will connect pin 2 to ground an
 
   This example is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/KeyboardLogout
+  https://www.arduino.cc/en/Tutorial/KeyboardLogout
 
 */
 
diff --git a/content/built-in-examples/09.usb/KeyboardReprogram/KeyboardReprogram.md b/content/built-in-examples/09.usb/KeyboardReprogram/KeyboardReprogram.md
@@ -77,7 +77,7 @@ Connect your board to the USB port, then push the button to connect D2 with GND
 
   This example is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/KeyboardReprogram
+  https://www.arduino.cc/en/Tutorial/KeyboardReprogram
 
 */
 
diff --git a/content/built-in-examples/09.usb/KeyboardSerial/KeyboardSerial.md b/content/built-in-examples/09.usb/KeyboardSerial/KeyboardSerial.md
@@ -56,7 +56,7 @@ Once programmed, open your serial monitor and send a byte. The board will reply
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/KeyboardSerial
+  https://www.arduino.cc/en/Tutorial/KeyboardSerial
 
 */
 
diff --git a/content/hardware/01.mkr/01.boards/mkr-1000-wifi/tutorials/analog-to-midi/AnalogToMidi.md b/content/hardware/01.mkr/01.boards/mkr-1000-wifi/tutorials/analog-to-midi/AnalogToMidi.md
@@ -77,7 +77,7 @@ Sends out to MIDI the event to turn off  the note of the specified pitch on the
 
   This example code is in the public domain
 
-  http://arduino.cchttps://www.arduino.cc/en/Tutorial/AnalogToMidi
+  https://www.arduino.cc/en/Tutorial/AnalogToMidi
 
   created by Arturo Guadalupi <a.guadalupi@arduino.cc>
 
diff --git a/content/hardware/02.hero/boards/zero/tutorials/simple-audio-frequency-meter/simple-audio-frequency-meter.md b/content/hardware/02.hero/boards/zero/tutorials/simple-audio-frequency-meter/simple-audio-frequency-meter.md
@@ -49,7 +49,7 @@ As an alternative, you may purchase the [Electret microphone amplifier - MAX4466
 
   This example code is in the public domain
 
-  http://arduino.cchttps://www.arduino.cc/en/Tutorial/SimpleAudioFrequencyMeter
+  https://www.arduino.cc/en/Tutorial/SimpleAudioFrequencyMeter
 
   created by Arturo Guadalupi <a.guadalupi@arduino.cc>
 
diff --git a/content/library-examples/esplora-library/EsploraJoystickMouse/EsploraJoystickMouse.md b/content/library-examples/esplora-library/EsploraJoystickMouse/EsploraJoystickMouse.md
@@ -92,7 +92,7 @@ When you attach the Esplora, press Shift-Command-M in the Arduino software to op
 
  by Scott Fitzgerald
 
- http://www.arduino.ccarduino.cc/en/Reference/EsploraReadJoystickSwitch
+ http://www.arduino.cc/en/Reference/EsploraReadJoystickSwitch
 
  This example is in the public domain.
 
diff --git a/content/library-examples/wifi-library/WiFiRTC/WiFiRTC.md b/content/library-examples/wifi-library/WiFiRTC/WiFiRTC.md
@@ -63,7 +63,7 @@ The code is based on [Epoch](https://raw.githubusercontent.com/arduino-libraries
 
   modified 26 Sept 2018
 
-  http://arduino.cchttps://www.arduino.cc/en/Tutorial/WiFiRTC
+  https://www.arduino.cc/en/Tutorial/WiFiRTC
 
   This code is in the public domain.
 
diff --git a/content/tutorials/generic/WiFi101ThingSpeakDataUploader/WiFi101ThingSpeakDataUploader.md b/content/tutorials/generic/WiFi101ThingSpeakDataUploader/WiFi101ThingSpeakDataUploader.md
@@ -103,7 +103,7 @@ by Helena Bisby <support@arduino.cc>
 
 This example code is in the public domain
 
-http://arduino.cchttps://www.arduino.cc/en/Tutorial/WiFi101ThingSpeakDataUploader
+https://www.arduino.cc/en/Tutorial/WiFi101ThingSpeakDataUploader
 
 */
 
diff --git a/content/tutorials/generic/Wifi101GoogleCalendar/Wifi101GoogleCalendar.md b/content/tutorials/generic/Wifi101GoogleCalendar/Wifi101GoogleCalendar.md
@@ -128,7 +128,7 @@ This function is used **event title** and the **event duration**  in order to un
 
   by Arturo Guadalupi <a.guadalupi@arduino.cc>
 
-  http://arduino.cchttps://www.arduino.cc/en/Tutorial/GoogleCalendarWiFi101
+  https://www.arduino.cc/en/Tutorial/GoogleCalendarWiFi101
 
   This code is in the public domain.
 
diff --git a/content/tutorials/generic/digital-input-pullup/digital-input-pullup.md b/content/tutorials/generic/digital-input-pullup/digital-input-pullup.md
@@ -63,7 +63,7 @@ Connect the pushbutton between pin 2 and ground, without any resistor as referen
 
   This example code is in the public domain.
 
-  http://www.arduino.cchttps://www.arduino.cc/en/Tutorial/InputPullupSerial
+  https://www.arduino.cc/en/Tutorial/InputPullupSerial
 
 */
 
diff --git a/content/tutorials/generic/simple-rtc-alarm/simple-rtc-alarm.md b/content/tutorials/generic/simple-rtc-alarm/simple-rtc-alarm.md
@@ -31,7 +31,7 @@ Only your Arduino Board is needed for this example.
 
   This example code is in the public domain
 
-  http://arduino.cchttps://www.arduino.cc/en/Tutorial/SimpleRTCAlarm
+  https://www.arduino.cc/en/Tutorial/SimpleRTCAlarm
 
   created by Arturo Guadalupi <a.guadalupi@arduino.cc>
 
diff --git a/content/tutorials/generic/simple-rtc/simple-rtc.md b/content/tutorials/generic/simple-rtc/simple-rtc.md
@@ -29,7 +29,7 @@ Only your Arduino Board is needed for this example.
 
   This example code is in the public domain
 
-  http://arduino.cchttps://www.arduino.cc/en/Tutorial/SimpleRTC
+  https://www.arduino.cc/en/Tutorial/SimpleRTC
 
   created by Arturo Guadalupi <a.guadalupi@arduino.cc>
 
diff --git a/content/tutorials/generic/sleep-rtc-alarm/sleep-rtc-alarm.md b/content/tutorials/generic/sleep-rtc-alarm/sleep-rtc-alarm.md
@@ -29,7 +29,7 @@ Only your Arduino Board is needed for this example.
 
   This example code is in the public domain
 
-  http://arduino.cchttps://www.arduino.cc/en/Tutorial/SleepRTCAlarm
+  https://www.arduino.cc/en/Tutorial/SleepRTCAlarm
 
   created by Arturo Guadalupi
 
