Describe the problem

On Arduino 1.8.19, if you for example open up the example sketch: 01 Basic -> blink

And then close down Arduino. And then reopen Arduino, and go to the File -> Open Recent menu
Blink is on the list.

If you do this with IDE2, blink does not show up on the list.

Note: Also if you closed down IDE1 and blink was open, it will be reopened when you launch it again.

To reproduce

discussed in the problem.

Expected behavior

Would expect it to be remembered. And not the temp folder.

Arduino IDE version

running 0401 nightly

Operating system

Windows

Operating system version

10

Additional context

Note: I mentioned this in an comment on #925 and was asked to split this out as it's own issue.

Additional requests

• https://forum.arduino.cc/t/add-sketch-name-search-capability/1118306/3
• https://forum.arduino.cc/t/ide-2-3-2-not-updating-last-sketch-edited/1292503

Issue checklist

• I searched for previous reports in the issue tracker
• I verified the problem still occurs when using the latest nightly build
• My report contains all necessary details