tag:github.com,2008:https://github.com/arduino/ArduinoCore-megaavr/releases 2022-12-05T09:26:17Z tag:github.com,2008:Repository/155397083/1.8.8 2022-12-05T09:26:17Z <p>Release 1.8.8</p> facchinm tag:github.com,2008:Repository/155397083/1.8.7 2020-12-30T10:11:53Z <p>Update core to 1.8.7</p> facchinm tag:github.com,2008:Repository/155397083/1.8.6 2020-04-07T09:06:01Z <p>Release 1.8.6</p> facchinm tag:github.com,2008:Repository/155397083/1.8.5 2019-09-17T08:28:28Z <p>Remove PROGMEM attribute and pgm_read_byte Not needed since the megaA…</p> MCUdude tag:github.com,2008:Repository/155397083/1.8.3 2019-07-23T14:32:37Z <ul> <li>Fix A6/A7 swapped on Nano Every</li> <li>Add Windows drivers for Nano Every</li> </ul> facchinm tag:github.com,2008:Repository/155397083/1.8.2 2019-07-01T12:40:12Z <ul> <li>Fix digitalRead/write on analog pins (on Nano Every)</li> <li>Publish sources for MuxTO (Nano Every D11 firmware)</li> <li>Avoid spurious characters after Serial.begin()</li> <li>Take into account bootloader size on UNO WiFI rev2 when calculating the maximum sketch size</li> </ul> facchinm tag:github.com,2008:Repository/155397083/1.8.1 2019-05-24T13:48:21Z <p>Add Nano Every<br> Fix programming stuck with -67<br> Add udev rule for Linux<br> Add (optional) UART bootloader for UNO Wifi rev2</p> facchinm tag:github.com,2008:Repository/155397083/1.6.26 2019-03-22T16:11:23Z <p>Fix Wire library (slave, buffer optimization, scan)<br> Allow using a different timer for millis() for targets that lack TCB3 (attinies)</p> facchinm tag:github.com,2008:Repository/155397083/1.6.25 2019-03-22T16:12:19Z <p>Fix tone()<br> Add portModeRegister macro</p> facchinm tag:github.com,2008:Repository/155397083/1.6.24 2019-01-07T11:41:16Z No content. facchinm