nicla-system: Apply suggestions from Ali's code review.

sebromero · aliphys · web-flow · commit 1ca6fc33a999 · 2023-05-12T09:53:28.000+02:00
Co-authored-by: Ali Jahangiri &lt;75624145+aliphys@users.noreply.github.com&gt;
diff --git a/libraries/Nicla_System/examples/NiclaSenseME_BatteryChargingSimple/NiclaSenseME_BatteryChargingSimple.ino b/libraries/Nicla_System/examples/NiclaSenseME_BatteryChargingSimple/NiclaSenseME_BatteryChargingSimple.ino
@@ -1,14 +1,14 @@
 /*
  * This example shows how to use the Nicla Sense ME library to charge a battery.
  * 
- * The LED colors will change depending on the battery's operating status:
+ * The LED color will change depending on the battery's operating status:
  * - Blue: Ready
  * - Yellow: Charging
  * - Green: Charging complete
  * - Red: Error
  * 
  * Instructions:
- * 1. Connect a battery to the board.
+ * 1. Connect a single cell (3.7V nominal) LiPo/Li-Ion battery to the board via battery connector (J4) or the pin header (J3).
  * 2. Configure the charge current in the setup() function.
  * 3. Upload this sketch to your Nicla Sense ME board.
  * 

Original file line number	Diff line number	Diff line change
`@@ -1,14 +1,14 @@`
`1`	`1`	`/*`
`2`	`2`	`* This example shows how to use the Nicla Sense ME library to charge a battery.`
`3`	`3`	`*`
`4`		`- * The LED colors will change depending on the battery's operating status:`
	`4`	`+ * The LED color will change depending on the battery's operating status:`
`5`	`5`	`* - Blue: Ready`
`6`	`6`	`* - Yellow: Charging`
`7`	`7`	`* - Green: Charging complete`
`8`	`8`	`* - Red: Error`
`9`	`9`	`*`
`10`	`10`	`* Instructions:`
`11`		`- * 1. Connect a battery to the board.`
	`11`	`+ * 1. Connect a single cell (3.7V nominal) LiPo/Li-Ion battery to the board via battery connector (J4) or the pin header (J3).`
`12`	`12`	`* 2. Configure the charge current in the setup() function.`
`13`	`13`	`* 3. Upload this sketch to your Nicla Sense ME board.`
`14`	`14`	`*`