08_static_code_checks.rst

Static code checks

The static code checks in Airflow are used to verify that the code meets certain quality standards. All the static code checks can be run through pre-commit hooks.

The pre-commit hooks perform all the necessary installation when you run them for the first time. See the table below to identify which pre-commit checks require the Breeze Docker images.

You can also run the checks via Breeze environment.

The outline for this document in GitHub is available at top-right corner button (with 3-dots and 3 lines).

Pre-commit hooks

Pre-commit hooks help speed up your local development cycle and place less burden on the CI infrastructure. Consider installing the pre-commit hooks as a necessary prerequisite.

The pre-commit hooks by default only check the files you are currently working on and make them fast. Yet, these checks use exactly the same environment as the CI tests use. So, you can be sure your modifications will also work for CI if they pass pre-commit hooks.

We have integrated the fantastic pre-commit framework in our development workflow. To install and use it, you need at least Python 3.9 locally.

Installing pre-commit hooks

It is the best to use pre-commit hooks when you have your local virtualenv for Airflow activated since then pre-commit hooks and other dependencies are automatically installed. You can also install the pre-commit hooks manually using pip install.

pip install pre-commit

After installation, pre-commit hooks are run automatically when you commit the code and they will only run on the files that you change during your commit, so they are usually pretty fast and do not slow down your iteration speed on your changes. There are also ways to disable the pre-commits temporarily when you commit your code with --no-verify switch or skip certain checks that you find to much disturbing your local workflow. See Available pre-commit checks and Using pre-commit

The pre-commit hooks use several external linters that need to be installed before pre-commit is run. Each of the checks installs its own environment, so you do not need to install those, but there are some checks that require locally installed binaries. On Linux, you typically install them with sudo apt install, on macOS - with brew install.

The current list of prerequisites is limited to xmllint:

• on Linux, install via sudo apt install libxml2-utils
• on macOS, install via brew install libxml2

Some pre-commit hooks also require the Docker Engine to be configured as the static checks are executed in the Docker environment (See table in the Available pre-commit checks . You should build the images locally before installing pre-commit checks as described in Breeze docs.

Sometimes your image is outdated and needs to be rebuilt because some dependencies have been changed. In such cases, the Docker-based pre-commit will inform you that you should rebuild the image.

In case you do not have your local images built, the pre-commit hooks fail and provide instructions on what needs to be done.

Enabling pre-commit hooks

To turn on pre-commit checks for commit operations in git, enter:

pre-commit install

To install the checks also for pre-push operations, enter:

pre-commit install -t pre-push

For details on advanced usage of the install method, use:

pre-commit install --help

Available pre-commit checks

This table lists pre-commit hooks used by Airflow. The Image column indicates which hooks require Breeze Docker image to be built locally.

ID	Description	Image
bandit	bandit
blacken-docs	Run black on docs
check-aiobotocore-optional	Check if aiobotocore is an optional dependency only
check-airflow-k8s-not-used	Check airflow.kubernetes imports are not used
check-airflow-provider-compatibility	Check compatibility of Providers with Airflow
check-airflow-providers-bug-report-template	Sort airflow-bug-report provider list
check-apache-license-rat	Check if licenses are OK for Apache
check-base-operator-partial-arguments	Check BaseOperator and partial() arguments
check-base-operator-usage	Check BaseOperator core imports Check BaseOperatorLink core imports Check BaseOperator[Link] other imports
check-boring-cyborg-configuration	Checks for Boring Cyborg configuration consistency
check-breeze-top-dependencies-limited	Check top-level breeze deps
check-builtin-literals	Require literal syntax when initializing builtins
check-changelog-format	Check changelog format
check-changelog-has-no-duplicates	Check changelogs for duplicate entries
check-cncf-k8s-only-for-executors	Check cncf.kubernetes imports used for executors only
check-code-deprecations	Check deprecations categories in decorators
check-common-compat-used-for-openlineage	Check common.compat is used for OL deprecated classes
check-core-deprecation-classes	Verify usage of Airflow deprecation classes in core
check-daysago-import-from-utils	days_ago imported from airflow.utils.dates
check-decorated-operator-implements-custom-name	Check @task decorator implements custom_operator_name
check-deferrable-default	Check and fix default value of default_deferrable
check-docstring-param-types	Check that docstrings do not specify param types
check-example-dags-urls	Check that example dags url include provider versions
check-executables-have-shebangs	Check that executables have shebang
check-extra-packages-references	Checks setup extra packages
check-extras-order	Check order of extras in Dockerfile
check-fab-migrations	Check no migration is done on FAB related table
check-for-inclusive-language	Check for language that we do not accept as community
check-get-lineage-collector-providers	Check providers import hook lineage code from compat
check-google-re2-as-dependency	Check google-re2 declared as dep
check-hatch-build-order	Check order of dependencies in hatch_build.py
check-hooks-apply	Check if all hooks apply to the repository
check-incorrect-use-of-LoggingMixin	Make sure LoggingMixin is not used alone
check-init-decorator-arguments	Sync model __init__ and decorator arguments
check-integrations-list-consistent	Sync integrations list with docs
check-lazy-logging	Check that all logging methods are lazy
check-links-to-example-dags-do-not-use-hardcoded-versions	Verify no hard-coded version in example dags
check-merge-conflict	Check that merge conflicts are not being committed
check-newsfragments-are-valid	Check newsfragments are valid
check-no-airflow-deprecation-in-providers	Do not use DeprecationWarning in providers
check-no-providers-in-core-examples	No providers imports in core example DAGs
check-only-new-session-with-provide-session	Check NEW_SESSION is only used with @provide_session
check-persist-credentials-disabled-in-github-workflows	Check persistent creds in workflow files
check-pre-commit-information-consistent	Validate hook IDs & names and sync with docs
check-provide-create-sessions-imports	Check provide_session and create_session imports
check-provider-docs-valid	Validate provider doc files
check-provider-yaml-valid	Validate provider.yaml files
check-providers-subpackages-init-file-exist	Provider subpackage init files are there
check-pydevd-left-in-code	Check for pydevd debug statements accidentally left
check-revision-heads-map	Check that the REVISION_HEADS_MAP is up-to-date
check-safe-filter-usage-in-html	Don't use safe in templates
check-sql-dependency-common-data-structure	Check dependency of SQL providers
check-start-date-not-used-in-defaults	start_date not in default_args
check-system-tests-present	Check if system tests have required segments of code
check-system-tests-tocs	Check that system tests is properly added
check-taskinstance-tis-attrs	Check that TI and TIS have the same attributes
check-template-context-variable-in-sync	Sync template context variable refs
check-template-fields-valid	Check templated fields mapped in operators/sensors
check-tests-in-the-right-folders	Check if tests are in the right folders
check-tests-unittest-testcase	Unit tests do not inherit from unittest.TestCase
check-urlparse-usage-in-code	Don't use urlparse in code
check-usage-of-re2-over-re	Use re2 module instead of re
check-xml	Check XML files with xmllint
codespell	Run codespell
compile-ui-assets	Compile ui assets (manual)
compile-ui-assets-dev	Compile ui assets in dev mode (manual)
compile-www-assets	Compile www assets (manual)
compile-www-assets-dev	Compile www assets in dev mode (manual)
create-missing-init-py-files-tests	Create missing init.py files in tests
debug-statements	Detect accidentally committed debug statements
detect-private-key	Detect if private key is added to the repository
doctoc	Add TOC for Markdown and RST files
end-of-file-fixer	Make sure that there is an empty line at the end
fix-encoding-pragma	Remove encoding header from Python files
flynt	Run flynt string format converter for Python
generate-airflow-diagrams	Generate airflow diagrams
generate-openapi-spec	Generate the FastAPI API spec
generate-pypi-readme	Generate PyPI README
identity	Print checked files
insert-license	Add license for all SQL files Add license for all RST files Add license for CSS/JS/JSX/PUML/TS/TSX Add license for all JINJA template files Add license for all Shell files Add license for all toml files Add license for all Python files Add license for all XML files Add license for all Helm template files Add license for all YAML files except Helm templates Add license for all Markdown files Add license for all other files
kubeconform	Kubeconform check on our helm chart
lint-chart-schema	Lint chart/values.schema.json file
lint-css	stylelint
lint-dockerfile	Lint Dockerfile
lint-helm-chart	Lint Helm Chart
lint-json-schema	Lint JSON Schema files Lint NodePort Service Lint Docker compose files Lint chart/values.schema.json Lint chart/values.yaml Lint config_templates/config.yml
lint-markdown	Run markdownlint
lint-openapi	Lint OpenAPI using spectral Lint OpenAPI using openapi-spec-validator
mixed-line-ending	Detect if mixed line ending is used (r vs. rn)
mypy-airflow	Run mypy for airflow Run mypy for airflow (manual)
mypy-dev	Run mypy for dev Run mypy for dev (manual)
mypy-docs	Run mypy for /docs/ folder Run mypy for /docs/ folder (manual)
mypy-providers	Run mypy for providers Run mypy for providers (manual)
mypy-task-sdk	Run mypy for Task SDK Run mypy for Task SDK (manual)
pretty-format-json	Format JSON files
pylint	pylint
python-no-log-warn	Check if there are no deprecate log warn
replace-bad-characters	Replace bad characters
rst-backticks	Check if RST files use double backticks for code
ruff	Run 'ruff' for extremely fast Python linting
ruff-format	Run 'ruff format'
shellcheck	Check Shell scripts syntax correctness
trailing-whitespace	Remove trailing whitespace at end of line
ts-compile-format-lint-ui	Compile / format / lint UI
ts-compile-format-lint-www	Compile / format / lint WWW
update-black-version	Update black versions everywhere (manual)
update-breeze-cmd-output	Update breeze docs
update-breeze-readme-config-hash	Update Breeze README.md with config files hash
update-build-dependencies	Update build-dependencies to latest (manual)
update-chart-dependencies	Update chart dependencies to latest (manual)
update-common-sql-api-stubs	Check and update common.sql API stubs
update-er-diagram	Update ER diagram
update-extras	Update extras in documentation
update-in-the-wild-to-be-sorted	Sort INTHEWILD.md alphabetically
update-inlined-dockerfile-scripts	Inline Dockerfile and Dockerfile.ci scripts
update-installed-providers-to-be-sorted	Sort and uniquify installed_providers.txt
update-installers	Update installers to latest (manual)
update-local-yml-file	Update mounts in the local yml file
update-migration-references	Update migration ref doc
update-openapi-spec-tags-to-be-sorted	Sort alphabetically openapi spec tags
update-providers-dependencies	Update dependencies for provider packages
update-reproducible-source-date-epoch	Update Source Date Epoch for reproducible builds
update-spelling-wordlist-to-be-sorted	Sort spelling_wordlist.txt
update-supported-versions	Updates supported versions in documentation
update-vendored-in-k8s-json-schema	Vendor k8s definitions into values.schema.json
update-version	Update versions in docs
validate-operators-init	No templated field logic checks in operator __init__
yamllint	Check YAML files with yamllint

Using pre-commit

After installation, pre-commit hooks are run automatically when you commit the code. But you can run pre-commit hooks manually as needed.

• Run all checks on your staged files by using:

pre-commit run

• Run only mypy check on your staged files (in airflow/ excluding providers) by using:

pre-commit run mypy-airflow

• Run only mypy checks on all files by using:

pre-commit run mypy-airflow --all-files

• Run all checks on all files by using:

pre-commit run --all-files

• Run all checks only on files modified in the last locally available commit in your checked out branch:

pre-commit run --source=HEAD^ --origin=HEAD

• Show files modified automatically by pre-commit when pre-commits automatically fix errors

pre-commit run --show-diff-on-failure

• Skip one or more of the checks by specifying a comma-separated list of checks to skip in the SKIP variable:

SKIP=mypy-airflow,ruff pre-commit run --all-files

You can always skip running the tests by providing --no-verify flag to the git commit command.

To check other usage types of the pre-commit framework, see Pre-commit website.

Disabling particular checks

In case you have a problem with running particular pre-commit check you can still continue using the benefits of having pre-commit installed, with some of the checks disabled. In order to disable checks you might need to set SKIP environment variable to coma-separated list of checks to skip. For example, when you want to skip some checks (ruff/mypy for example), you should be able to do it by setting export SKIP=ruff,mypy-airflow,. You can also add this to your .bashrc or .zshrc if you do not want to set it manually every time you enter the terminal.

In case you do not have breeze image configured locally, you can also disable all checks that require breeze the image by setting SKIP_BREEZE_PRE_COMMITS to "true". This will mark the tests as "green" automatically when run locally (note that those checks will anyway run in CI).

Manual pre-commits

Most of the checks we run are configured to run automatically when you commit the code. However, there are some checks that are not run automatically and you need to run them manually. Those checks are marked with manual in the Description column in the table below. You can run them manually by running pre-commit run --hook-stage manual <hook-id>.

Mypy checks

When we run mypy checks locally when committing a change, one of the mypy-* checks is run, mypy-airflow, mypy-dev, mypy-providers, mypy-docs, depending on the files you are changing. The mypy checks are run by passing those changed files to mypy. This is way faster than running checks for all files (even if mypy cache is used - especially when you change a file in airflow core that is imported and used by many files). However, in some cases, it produces different results than when running checks for the whole set of files, because mypy does not even know that some types are defined in other files and it might not be able to follow imports properly if they are dynamic. Therefore in CI we run mypy check for whole directories (airflow - excluding providers, providers, dev and docs) to make sure that we catch all mypy errors - so you can experience different results when running mypy locally and in CI. If you want to run mypy checks for all files locally, you can do it by running the following command (example for airflow files):

pre-commit run --hook-stage manual mypy-<FOLDER> --all-files

For example:

pre-commit run --hook-stage manual mypy-airflow --all-files

MyPy uses a separate docker-volume (called mypy-cache-volume) that keeps the cache of last MyPy execution in order to speed MyPy checks up (sometimes by order of magnitude). While in most cases MyPy will handle refreshing the cache when and if needed, there are some cases when it won't (cache invalidation is the hard problem in computer science). This might happen for example when we upgrade MyPY. In such cases you might need to manually remove the cache volume by running breeze down --cleanup-mypy-cache.

Running static code checks via Breeze

The static code checks can be launched using the Breeze environment.

You run the static code checks via breeze static-check or commands.

You can see the list of available static checks either via --help flag or by using the autocomplete option.

Run the mypy check for the currently staged changes (in airflow/ excluding providers):

breeze static-checks --type mypy-airflow

Run the mypy check for all files:

breeze static-checks --type mypy-airflow --all-files

Run the ruff check for the tests/core.py file with verbose output:

breeze static-checks --type ruff --file tests/core.py --verbose

Run the ruff check for the tests.core package with verbose output:

breeze static-checks --type ruff --file tests/core/* --verbose

Run the ruff-format check for the files airflow/example_dags/example_bash_operator.py and airflow/example_dags/example_python_operator.py:

breeze static-checks --type ruff-format --file airflow/example_dags/example_bash_operator.py \
    airflow/example_dags/example_python_operator.py

Run all checks for the currently staged files:

breeze static-checks

Run all checks for all files:

breeze static-checks --all-files

Run all checks for last commit:

breeze static-checks --last-commit

Run all checks for all changes in my branch since branched from main:

breeze static-checks --type mypy-airflow --only-my-changes

More examples can be found in Breeze documentation

Debugging pre-commit check scripts requiring image

Those commits that use Breeze docker image might sometimes fail, depending on your operating system and docker setup, so sometimes it might be required to run debugging with the commands. This is done via two environment variables VERBOSE and DRY_RUN. Setting them to "true" will respectively show the commands to run before running them or skip running the commands.

Note that you need to run pre-commit with --verbose command to get the output regardless of the status of the static check (normally it will only show output on failure).

Printing the commands while executing:

VERBOSE="true" pre-commit run --verbose ruff

Just performing dry run:

DRY_RUN="true" pre-commit run --verbose ruff

---

Once your code passes all the static code checks, you should take a look at Testing documentation to learn about various ways to test the code.