Update READMEs with VADJ info for daq2 project

Author: mandrica

projects/daq2/README.md

@@ -3,6 +3,7 @@
 - Evaluation board product page: [EVAL-AD-FMCDAQ2-EBZ](https://www.analog.com/eval-ad-fmcdaq2-ebz)
 - System documentation: https://wiki.analog.com/resources/eval/user-guides/ad-fmcdaq2-ebz
 - HDL project documentation: https://analogdevicesinc.github.io/hdl/projects/daq2/index.html
+- Evaluation board VADJ range: 1.8V - 2.5V
 
 ## Supported parts
 

projects/daq2/a10soc/README.md

@@ -1,5 +1,9 @@
+<!-- no_build_example, no_no_os -->
+
 # DAQ2/A10SOC HDL Project
 
+- VADJ with which it was tested in hardware: 1.8V
+
 ## Building the project
 
 ```

projects/daq2/kc705/README.md

@@ -1,5 +1,9 @@
+<!-- no_no_os -->
+
 # DAQ2/KC705 HDL Project
 
+- VADJ with which it was tested in hardware: 2.5V
+
 ## Building the project
 
 The parameters configurable through the `make` command, can be found below, as well as in the **system_project.tcl** file; it contains the default configuration.
@@ -38,4 +42,4 @@ TX_JESD_L=4 \
 TX_JESD_S=1
 ```
 
-Corresponding device tree: [kc705_fmcdaq2.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/microblaze/boot/dts/kc705_fmcdaq2.dts)
+Corresponding device tree: [kc705_fmcdaq2.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/microblaze/boot/dts/kc705_fmcdaq2.dts)

projects/daq2/kcu105/README.md

@@ -1,5 +1,9 @@
+<!-- no_no_os -->
+
 # DAQ2/KCU105 HDL Project
 
+- VADJ with which it was tested in hardware: 1.8V
+
 ## Building the project
 
 The parameters configurable through the `make` command, can be found below, as well as in the **system_project.tcl** file; it contains the default configuration.
@@ -38,4 +42,4 @@ TX_JESD_L=4 \
 TX_JESD_S=1
 ```
 
-Corresponding device tree: [kcu105_fmcdaq2.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/microblaze/boot/dts/kcu105_fmcdaq2.dts)
+Corresponding device tree: [kcu105_fmcdaq2.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/microblaze/boot/dts/kcu105_fmcdaq2.dts)

projects/daq2/zc706/README.md

@@ -1,5 +1,9 @@
+<!-- no_no_os -->
+
 # DAQ2/ZC706 HDL Project
 
+- VADJ with which it was tested in hardware: 2.5V
+
 ## Building the project
 
 The parameters configurable through the `make` command, can be found below, as well as in the **system_project.tcl** file; it contains the default configuration.
@@ -38,4 +42,4 @@ TX_JESD_L=4 \
 TX_JESD_S=1
 ```
 
-Corresponding device tree: [zynq-zc706-adv7511-fmcdaq2.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-zc706-adv7511-fmcdaq2.dts)
+Corresponding device tree: [zynq-zc706-adv7511-fmcdaq2.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm/boot/dts/xilinx/zynq-zc706-adv7511-fmcdaq2.dts)

projects/daq2/zcu102/README.md

@@ -1,5 +1,9 @@
+<!-- no_no_os -->
+
 # DAQ2/ZCU102 HDL Project
 
+- VADJ with which it was tested in hardware: 1.8V
+
 ## Building the project
 
 The parameters configurable through the `make` command, can be found below, as well as in the **system_project.tcl** file; it contains the default configuration.
@@ -51,4 +55,4 @@ TX_JESD_L=4 \
 TX_JESD_S=1
 ```
 
-Corresponding device tree: [zynqmp-zcu102-rev10-fmcdaq2_m4_l4.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-fmcdaq2_m4_l4.dts)
+Corresponding device tree: [zynqmp-zcu102-rev10-fmcdaq2_m4_l4.dts](https://github.com/analogdevicesinc/linux/blob/main/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev10-fmcdaq2_m4_l4.dts)