From 1b45b3802ac62c3b1e47213b847d9eb772ba1f4b Mon Sep 17 00:00:00 2001
From: charlespick <charles.pickering19@gmail.com>
Date: Thu, 20 May 2021 04:06:26 -0700
Subject: [PATCH] =?UTF-8?q?=E2=9C=A8=20Independent=20baud=20rates=20(#2194?=
 =?UTF-8?q?9)?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>
---
 Marlin/Configuration.h              | 27 ++++++++++++++++-----------
 Marlin/Configuration_adv.h          |  3 ---
 Marlin/src/MarlinCore.cpp           | 10 ++++++++--
 buildroot/tests/STM32F103RC_btt_USB |  2 +-
 4 files changed, 25 insertions(+), 17 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 58cb2514889b..366267aa7e97 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -104,12 +104,27 @@
  */
 #define SERIAL_PORT 0
 
+/**
+ * Serial Port Baud Rate
+ * This is the default communication speed for all serial ports.
+ * Set the baud rate defaults for additional serial ports below.
+ *
+ * 250000 works in most cases, but you might try a lower speed if
+ * you commonly experience drop-outs during host printing.
+ * You may try up to 1000000 to speed up SD file transfer.
+ *
+ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
+ */
+#define BAUDRATE 250000
+//#define BAUD_RATE_GCODE     // Enable G-code M575 to set the baud rate
+
 /**
  * Select a secondary serial port on the board to use for communication with the host.
  * Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
  * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
  */
 //#define SERIAL_PORT_2 -1
+//#define BAUDRATE_2 250000   // Enable to override BAUDRATE
 
 /**
  * Select a third serial port on the board to use for communication with the host.
@@ -117,17 +132,7 @@
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  */
 //#define SERIAL_PORT_3 1
-
-/**
- * This setting determines the communication speed of the printer.
- *
- * 250000 works in most cases, but you might try a lower speed if
- * you commonly experience drop-outs during host printing.
- * You may try up to 1000000 to speed up SD file transfer.
- *
- * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
- */
-#define BAUDRATE 250000
+//#define BAUDRATE_3 250000   // Enable to override BAUDRATE
 
 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 5335fa012a15..5db36d9cbbe7 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -2114,9 +2114,6 @@
   //#define SERIAL_XON_XOFF
 #endif
 
-// Add M575 G-code to change the baud rate
-//#define BAUD_RATE_GCODE
-
 #if ENABLED(SDSUPPORT)
   // Enable this option to collect and display the maximum
   // RX queue usage after transferring a file to SD.
diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
index 5ef575a30f6a..4fca64ba6b79 100644
--- a/Marlin/src/MarlinCore.cpp
+++ b/Marlin/src/MarlinCore.cpp
@@ -1073,11 +1073,17 @@ void setup() {
   while (!MYSERIAL1.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
 
   #if HAS_MULTI_SERIAL && !HAS_ETHERNET
-    MYSERIAL2.begin(BAUDRATE);
+    #ifndef BAUDRATE_2
+      #define BAUDRATE_2 BAUDRATE
+    #endif
+    MYSERIAL2.begin(BAUDRATE_2);
     serial_connect_timeout = millis() + 1000UL;
     while (!MYSERIAL2.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
     #ifdef SERIAL_PORT_3
-      MYSERIAL3.begin(BAUDRATE);
+      #ifndef BAUDRATE_3
+        #define BAUDRATE_3 BAUDRATE
+      #endif
+      MYSERIAL3.begin(BAUDRATE_3);
       serial_connect_timeout = millis() + 1000UL;
       while (!MYSERIAL3.connected() && PENDING(millis(), serial_connect_timeout)) { /*nada*/ }
     #endif
diff --git a/buildroot/tests/STM32F103RC_btt_USB b/buildroot/tests/STM32F103RC_btt_USB
index 8381de0ea6e4..fb0f2f5bd2d9 100755
--- a/buildroot/tests/STM32F103RC_btt_USB
+++ b/buildroot/tests/STM32F103RC_btt_USB
@@ -10,7 +10,7 @@ set -e
 # Build with the default configurations
 #
 restore_configs
-opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1
+opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1 BAUDRATE_2 115200
 exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration" "$3"
 
 # clean up