[ALSA] Revised AT32 ASoC Patch

Attached is a revised version of my patch to add AT32 to ASoC.  This cleans
most of the style issues associated with the previous patch.  Also fixes an
issue with the playpaq_wm8510.c code depending on a non-released patch to th
AT32 portmux support.

Patch is against 2.6.24.3.atmel.3 kernel, the latest AVR32 kernel Atmel has
released, with the linux-2.6-asoc patches from when v2.6.24 was tagged also
applied.

[Fixed up minor checkpatch issues and updated for current kernels -- broonie]

Signed-off-by: Geoffrey Wossum <gwossum@acm.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

sound/soc/Kconfig

@@ -22,6 +22,7 @@ config SND_SOC_AC97_BUS
 	bool
 
 # All the supported Soc's
+source "sound/soc/at32/Kconfig"
 source "sound/soc/at91/Kconfig"
 source "sound/soc/pxa/Kconfig"
 source "sound/soc/s3c24xx/Kconfig"

sound/soc/Makefile

@@ -1,4 +1,5 @@
 snd-soc-core-objs := soc-core.o soc-dapm.o
 
 obj-$(CONFIG_SND_SOC)	+= snd-soc-core.o
-obj-$(CONFIG_SND_SOC)	+= codecs/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ omap/
+obj-$(CONFIG_SND_SOC)	+= codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/
+obj-$(CONFIG_SND_SOC)	+= omap/

sound/soc/at32/Kconfig

@@ -0,0 +1,34 @@
+config SND_AT32_SOC
+        tristate "SoC Audio for the Atmel AT32 System-on-a-Chip"
+        depends on AVR32 && SND_SOC
+        help
+          Say Y or M if you want to add support for codecs attached to 
+          the AT32 SSC interface.  You will also need to
+          to select the audio interfaces to support below.
+
+
+config SND_AT32_SOC_SSC
+        tristate
+
+
+
+config SND_AT32_SOC_PLAYPAQ
+        tristate "SoC Audio support for PlayPaq with WM8510"
+        depends on SND_AT32_SOC && BOARD_PLAYPAQ
+        select SND_AT32_SOC_SSC
+        select SND_SOC_WM8510
+        help
+          Say Y or M here if you want to add support for SoC audio
+          on the LRS PlayPaq.
+
+
+
+config SND_AT32_SOC_PLAYPAQ_SLAVE
+        bool "Run CODEC on PlayPaq in slave mode"
+        depends on SND_AT32_SOC_PLAYPAQ
+        default n
+        help
+          Say Y if you want to run with the AT32 SSC generating the BCLK
+          and FRAME signals on the PlayPaq.  Unless you want to play
+          with the AT32 as the SSC master, you probably want to say N here,
+          as this will give you better sound quality.

sound/soc/at32/Makefile

@@ -0,0 +1,11 @@
+# AT32 Platform Support
+snd-soc-at32-objs := at32-pcm.o
+snd-soc-at32-ssc-objs := at32-ssc.o
+
+obj-$(CONFIG_SND_AT32_SOC) += snd-soc-at32.o
+obj-$(CONFIG_SND_AT32_SOC_SSC) += snd-soc-at32-ssc.o
+
+# AT32 Machine Support
+snd-soc-playpaq-objs := playpaq_wm8510.o
+
+obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o