Skip to content

Latest commit

 

History

History
127 lines (94 loc) · 3.45 KB

building-frr-for-freebsd10.rst

File metadata and controls

127 lines (94 loc) · 3.45 KB

FreeBSD 10

FreeBSD 10 restrictions:

  • MPLS is not supported on FreeBSD. MPLS requires a Linux Kernel (4.5 or higher). LDP can be built, but may have limited use without MPLS

Install required packages

Add packages: (Allow the install of the package management tool if this is first package install and asked)

pkg install git autoconf automake libtool gmake json-c pkgconf \
    bison flex py36-pytest c-ares python3.6 py36-sphinx

Make sure there is no /usr/bin/flex preinstalled (and use the newly installed in /usr/local/bin): (FreeBSD frequently provides a older flex as part of the base OS which takes preference in path)

rm -f /usr/bin/flex

Get FRR, compile it and install it (from Git)

This assumes you want to build and install FRR from source and not using any packages

Add frr group and user

pw groupadd frr -g 101
pw groupadd frrvty -g 102
pw adduser frr -g 101 -u 101 -G 102 -c "FRR suite" \
    -d /usr/local/etc/frr -s /usr/sbin/nologin

(You may prefer different options on configure statement. These are just an example)

git clone https://github.com/frrouting/frr.git frr
cd frr
./bootstrap.sh
export MAKE=gmake
export LDFLAGS="-L/usr/local/lib"
export CPPFLAGS="-I/usr/local/include"
./configure \
    --sysconfdir=/usr/local/etc/frr \
    --enable-pkgsrcrcdir=/usr/pkg/share/examples/rc.d \
    --localstatedir=/var/run/frr \
    --prefix=/usr/local \
    --enable-multipath=64 \
    --enable-user=frr \
    --enable-group=frr \
    --enable-vty-group=frrvty \
    --enable-configfile-mask=0640 \
    --enable-logfile-mask=0640 \
    --enable-fpm \
    --with-pkg-git-version \
    --with-pkg-extra-version=-MyOwnFRRVersion
gmake
gmake check
sudo gmake install

Create empty FRR configuration files

sudo mkdir /usr/local/etc/frr

For integrated config file:

sudo touch /usr/local/etc/frr/frr.conf

For individual config files:

Note

Integrated config is preferred to individual config.

sudo touch /usr/local/etc/frr/babeld.conf
sudo touch /usr/local/etc/frr/bfdd.conf
sudo touch /usr/local/etc/frr/bgpd.conf
sudo touch /usr/local/etc/frr/eigrpd.conf
sudo touch /usr/local/etc/frr/isisd.conf
sudo touch /usr/local/etc/frr/ldpd.conf
sudo touch /usr/local/etc/frr/nhrpd.conf
sudo touch /usr/local/etc/frr/ospf6d.conf
sudo touch /usr/local/etc/frr/ospfd.conf
sudo touch /usr/local/etc/frr/pbrd.conf
sudo touch /usr/local/etc/frr/pimd.conf
sudo touch /usr/local/etc/frr/ripd.conf
sudo touch /usr/local/etc/frr/ripngd.conf
sudo touch /usr/local/etc/frr/staticd.conf
sudo touch /usr/local/etc/frr/zebra.conf
sudo chown -R frr:frr /usr/local/etc/frr/
sudo touch /usr/local/etc/frr/vtysh.conf
sudo chown frr:frrvty /usr/local/etc/frr/vtysh.conf
sudo chmod 640 /usr/local/etc/frr/*.conf

Enable IP & IPv6 forwarding

Add the following lines to the end of /etc/sysctl.conf:

# Routing: We need to forward packets
net.inet.ip.forwarding=1
net.inet6.ip6.forwarding=1

Reboot or use sysctl to apply the same config to the running system.