mbmd.md

mbmd

ModBus Measurement Daemon

Synopsis

Easily read and distribute data from ModBus meters and grid inverters

Options

  -a, --adapter string   Default MODBUS adapter. This option can be used if all devices are attached to a single adapter.
                         Can be either an RTU device (/dev/ttyUSB0) or TCP socket (localhost:502).
                         The default adapter can be overridden per device
  -b, --baudrate int     Serial interface baud rate (default 9600)
      --comset string    Communication parameters for default adapter, either 8N1 or 8E1.
                         Only applicable if the default adapter is an RTU device (default "8N1")
  -c, --config string    Config file (default is $HOME/mbmd.yaml)
  -h, --help             Help for mbmd
      --raw              Log raw device data
      --rtu              Use RTU over TCP for default adapter.
                         Typically used with RS485 to Ethernet adapters that don't perform protocol conversion (e.g. USR-TCP232).
                         Only applicable if the default adapter is a TCP connection
  -v, --verbose          Verbose mode

SEE ALSO

• mbmd inspect - Inspect SunSpec device models and implemented values
• mbmd read - Read register (EXPERIMENTAL)
• mbmd run - Read and publish measurements from all configured devices
• mbmd scan - Scan for attached devices
• mbmd version - Show MBMD version
• mbmd write - Write register (EXPERIMENTAL)