OSPF Topology Watcher

OSPF Watcher is a monitoring tool of OSPF topology changes for network engineers. It works via passively listening to OSPF control plane messages through a specially established OSPF adjacency between OSPF Watcher and one of the network device. The tool logs OSPF events and/or export by Logstash to Elastic Stack (ELK), Zabbix, WebHooks and Topolograph monitoring dashboard for keeping the history of events, alerting, instant notification. Components of the solution are wrapped into containers, so it can be increadebly fast to start it. The only thing is needed to configure manually - is GRE tunnel setup on the Linux host.

Note
Upvote in issues/12 if you are interested in tracking OSPF topology changes via BGP-LS.

Logged topology changes:

• OSPF neighbor adjacency Up/Down
• OSPF link cost changes
• OSPF networks appeared/disappeared from the topology

Architecture

Each Watcher instance maintains all routes and updates within an isolated network namespace. This isolation ensures efficient monitoring without interference and prevent route leaks.

Note
ospfwatcher:v1.1 is compatible with topolograph:v2.7, it means that OSPF network changes can be shown on the network graph.

Functional Role

Demo

Click on the image in order zoom it.

Discovering OSPF logs in Kibana. Examples

OSPF cost changes on links

Logs if OSPF adjacency was Up/Down or any networks appeared/disappeared.

Topolograph OSPF Monitoring. New subnet event shows where the subnet appeared

Topolograph OSPF Monitoring. Filter any subnet-related events, select Change metric event

new and old metric is shown

Topolograph OSPF Monitoring. up/down link events

Red timelines show link (~adjacency) down events, green one - up link (~adjacency).
Timeline 10.1.1.2-10.1.1.3 has been selected.

OSPF topology change notification/alarming via Zabbix. Examples

Zabbix's dashboard with active OSPF alarms detected by OSPFWatcher

Zabbix OSPF neighbor up/down alarm

This alarm tracks all new OSPF adjacencies or when device loses its OSPF neighbor

Zabbix OSPF Cost changed on transit links

Transit links are all links between active OSPF neighbors. If cost on a link was changed it might affect all actual/shortest paths traffic follows

Zabbix alert if OSPF network was stopped announcing from node

If a subnet was removed from OSPF node (the node withdrew it from the announcement) it means the network from this node became unavailable for others, this event will be logged too.

Slack notification

HTTP POST messages can be easily accepted by messengers, which allows to get instant notifications of OSPF topology changes:

Quick lab

Containerlab

Here is a lab for tracking OSPF topology changes placed here containerlab/frr01. Watcher logs:

OSPF topology changes are printed by Watcher in a text file only.

./containerlab/frr01/prepare.sh
sudo clab deploy --topo ./containerlab/frr01/frr01.clab.yml

How to connect OSPF watcher to real network

Table below shows different options of possible setups, starting from the bare minimum in case of running Containerlab for testing and ending with maximum setup size with Watcher, Topolograph and ELK. The following setup describes setup №2.

№	Deployment size	Number of compose files	Text file logs	View changes on network map	Zabbix/HTTP/Messengers notification	Searching events by any field any time
1	Bare minimum. Containerlab	0	+	-	-	-
2	1. Local Topolograph 2. local compose file with ELK disabled (commented)	2	+	+	+	-
3	1. Local Topolograph 2. local compose file with ELK enabled	3	+	+	+	+

Setup №2. Text logs + timeline of network changes on Topolograph

1. Choose a Linux host with Docker installed
2. Setup Topolograph It's needed for network events visualization on Topolograph UI. Skip if you don't want it.

• launch your own Topolograph on docker using topolograph-docker or make sure you have a connection to the public https://topolograph.com
• create a user for API authentication using Local Registration form on the Topolograph page, add your IP address in API/Authorised source IP ranges. Set variables in .env file:

Note

• TOPOLOGRAPH_HOST - set the IP address of your host, where the docker is hosted (if you run all demo on a single machine), do not put localhost, because ELK, Topolograph and OSPF Watcher run in their private network space
• TOPOLOGRAPH_PORT - by default 8080
• TOPOLOGRAPH_WEB_API_USERNAME_EMAIL - by default ospf@topolograph.com or put your recently created user
• TOPOLOGRAPH_WEB_API_PASSWORD - by default ospf
• TEST_MODE - if mode is True, a demo OSPF events from static file will be uploaded, not from FRR

3. Setup ELK (skip it, it's only needed for setup № 3)

• if you already have ELK instance running, fill ELASTIC_IP in env file and uncomment Elastic config here ospfwatcher/logstash/pipeline/logstash.conf. Currently additional manual configuration is needed for Index Templates creation, because create.py script doesn't accept the certificate of ELK. It's needed to have one in case of security setting enabled. Required mapping for the Index Template is in ospfwatcher/logstash/index_template/create.py. To create Index Templates, run:

sudo docker run -it --rm --env-file=./.env -v ./logstash/index_template/create.py:/home/watcher/watcher/create.py vadims06/ospf-watcher:latest python3 ./create.py

• if not - boot up a new ELK from docker-elk compose. For demo purporse set license of ELK as basic and turn off security. The setting are in docker-elk/elasticsearch/config/elasticsearch.yml

xpack.license.self_generated.type: basic
xpack.security.enabled: false

Note about having Elastic config commented > When the Elastic output plugin fails to connect to the ELK host, it blocks all other outputs and ignores "EXPORT_TO_ELASTICSEARCH_BOOL" value from env file. Regardless of EXPORT_TO_ELASTICSEARCH_BOOL being False, it tries to connect to Elastic host. The solution - uncomment this portion of config in case of having running ELK.

4. Setup OSPF Watcher

git clone https://github.com/Vadims06/ospfwatcher.git
cd ospfwatcher

Generate configuration files
vadims06/ospf-watcher:v1.7 includes a client for generating configurations for each Watcher for each OSPF area. To generate individual settings - run the client with --action add_watcher

sudo docker run -it --rm --user $UID -v ./:/home/watcher/watcher/ -v /etc/passwd:/etc/passwd:ro -v /etc/group:/etc/group:ro vadims06/ospf-watcher:latest python3 ./client.py --action add_watcher

Output:

+---------------------------+
|  Watcher Host             |                       +-------------------+
|  +------------+           |                       | Network device    |
|  | netns FRR  |           |                       |                   |
|  |            Tunnel [4]  |                       | Tunnel [4]        |
|  |  gre1   [3]TunnelIP----+-----------------------+[2]TunnelIP        |
|  |  eth1------+-vhost1    |       +-----+         | OSPF area num [5] |
|  |            | Host IP[6]+-------+ LAN |--------[1]Device IP         |
|  |            |           |       +-----+         |                   |
|  +------------+           |                       |                   |
|                           |                       +-------------------+
+---------------------------+
[1]Network device IP [x.x.x.x]: 

The script will create:

1. a folder under watcher folder with FRR configuration under router folder
2. a containerlab configuration file with network settings
3. an individual watcher log file in watcher folder.

OSPF routes of each Watcher instance stay isolated in watcher's network namespace. To stop OSPF routes from being installed even in the watcher's network namespace, we the following policy has been applied on the watcher:

# quagga/config/ospfd.conf
route-map TO_KERNEL deny 200
exit
!
ip protocol ospf route-map TO_KERNEL

5. Start OSPF Watcher
   Install containerlab To start the watcher run the following command. clab deploy is like a docker compose up -d command

sudo clab deploy --topo watcher/watcher1-tun1025/config.yml

It will create:

• Individual network namespace for Watcher and FRR
• A pair of tap interfaces to connect the watcher to Linux host
• GRE tunnel in Watcher's namespace
• NAT settings for GRE traffic
• FRR & Watcher instance

6. Setup GRE tunnel from the network device to the host. An example for Cisco

Note
You can skip this step and run ospfwatcher in test_mode, so test LSDB from the file will be taken and test changes (loss of adjacency and change of OSPF metric) will be posted in ELK

interface gigabitether0/1
ip address <GRE tunnel ip address>
tunnel mode gre
tunnel source <router-ip>
tunnel destination <host-ip>
ip ospf network type point-to-point

Set GRE tunnel network where is placed to quagga/config/ospfd.conf

Check OSPF neighbor, if there is no OSPF adjacency between network device and OSPF Watcher, check troubleshooting OSPF Watcher <-> Network device connection section below (to run diagnostic script).
7. Start log export to Topolograph and/or ELK (optionally if you configured Step 2 or 3)

docker-compose build
docker-compose up -d

Kibana settings

1. Index Templates Have been already created by logstash-index-creator container in compose yaml file. Open Management -> Stack Management -> Index Management ->[ Index Templates ] to make sure that the following templates are in the list:

   • ospf-watcher-costs-changes
   • ospf-watcher-updown-events
     

2. Index Pattern Create indices with the same name as index templates Go to: old ELK Stack Management/ Kibana/ Stack Management/ Index Pattern -> Create index pattern new ELK 8.x Management -> Stack Management -> Index Management -> [ Indices ]

   then Create index

   • ospf-watcher-costs-changes
   • ospf-watcher-updown-events

3. Data View Create data view for two event types. Go to Management -> Stack Management -> Data Views then Create data view

   Name: ospf-watcher-costs-changes
   Index pattern: ospf-watcher-costs-changes
   Timestamp field: use watcher time
   

   
   Repeat the same for ospf-watcher-updown-events As a result, there are two data views should be listed

Note What time to use @timestamp or watcher

It's better to use watcher time, because connection between Watcher and Logstash can be lost, but the watcher continues to log all topology changes with the correct time. When the connection is repaired, all logs will be added to ELK and you can check the time of the incident. If you choose @timestamp - the time of all logs will be the time of their addition to ELK.

4. Additional checks Make sure that:
   • .env has EXPORT_TO_ELASTICSEARCH_BOOL=True
   • ./logstash/pipeline/logstash.conf has ELK uncommented

Browse your topology changes logs

Your logs are here http://localhost:5601/ -> Analytics/Discover watcher-updown-events.

Zabbix settings

Zabbix settings are available here /docs/zabbix-ui. There are 4 hosts and items (host and item inside each host has the same names) are required:

• ospf_neighbor_up_down
• ospf_network_up_down
• ospf_link_cost_change
• ospf_stub_network_cost_change

WebHook setting

1. Create a Slack app
2. Enable Incoming Webhooks
3. Create an Incoming Webhook (generates URL)
4. Uncomment EXPORT_TO_WEBHOOK_URL_BOOL in .env, set the URL to WEBHOOK_URL

Logs sample 1

2023-01-01T00:00:00Z,demo-watcher,host10.10.10.4,down,10.10.10.5,01Jan2023_00h00m00s_7_hosts

• 2023-01-01T00:00:00Z - event timestamp
• demo-watcher - name of watcher
• host - event name: host, network, metric
• 10.10.10.4 - event object. Watcher detected an event related to 10.10.10.4 host
• down - event status: down, up, changed
• 10.10.10.5 - event detected by this node.
• 01Jan2023_00h00m00s_7_hosts - name of graph in Topolograph dashboard Summary: 10.10.10.5 detected that 10.10.10.4 host went down at 2023-01-01T00:00:00Z

Logs sample 2

2023-01-01T00:00:00Z,demo-watcher,network,192.168.13.0/24,changed,old_cost:10,new_cost:12,10.10.10.1,01Jan2023_00h00m00s_7_hosts,0.0.0.0,1234,internal,0

• 2023-01-01T00:00:00Z - event timestamp
• demo-watcher - name of watcher
• metric - event name: host, network, metric
• 192.168.13.0/24 - event object. Watcher detected an event related to 192.168.13.0/24 subnet
• changed - event status: down, up, changed
• 10 - old cost
• 12 - new cost
• 10.10.10.1 - event detected by this node.
• 01Jan2023_00h00m00s_7_hosts - name of graph in Topolograph dashboard
• 0.0.0.0 - OSPF area ID
• 1234 - AS number where OSPF is working
• internal - type of network: internal or external
• 0 - subtype of network: type-1, type-2 or 0 for internal subnets Summary: 10.10.10.1 detected that metric of 192.168.13.0/24 internal stub network changed from 10 to 12 at 2023-01-01T00:00:00Z in area 0

Troubleshooting

Symptoms

Networks changes are not tracked. Log file ./watcher/logs/watcher...log is empty.

Steps:

1. Run diagnostic script. It will check OSPF Watcher <-> Network device connection (iptables, packets from FRR/network device)

   sudo docker run -it --rm -v ./:/home/watcher/watcher/ --cap-add=NET_ADMIN -u root --network host vadims06/ospf-watcher:latest python3 ./client.py --action diagnostic --watcher_num <num>
   

2. Login on FRR.

   sudo docker exec -it watcher#-gre#-ospf-router vtysh
   

   show ip ospf neighbor should show network device as a neighbor in the output.

Symptoms

Dashboard page is blank. Events are not present on OSPF Monitoring page.

Steps:

OSPF Watcher consists of three services: OSPFd/FRR [1] -> Watcher [2] -> Logstash [3] -> Topolograph & ELK & Zabbix & WebHooks. Let's start each component one by one.

1. Check if FRR tracks OSPF changes in ./watcher/logs/watcher...log file (previous case)
   You should see tracked changes of your network, i.e. here we see that 10.0.0.0/29 network went up at 2023-10-27T07:50:24Z on 10.10.1.4 router.

   2024-07-22T20:24:08Z,watcher-local,network,8.8.0.60/30,changed,old_cost:12,new_cost:-1,10.10.10.5,01Jan2023_00h00m00s_7_hosts,0.0.0.0,65001,external,1
   

2. Check that logstash container from docker-compose.yml is running via docker ps command.

   1. Uncomment DEBUG_BOOL="True" in .env and start continuous logs docker logs -f logstash.
   2. Copy and paste the log from the first step in watcher's log file ./watcher/logs/watcher#-gre#-ospf.ospf.log. docker logs -f logstash should print the output. If not - check logstash container.

3. Check if logs are in Topolograph's DB. Connect to mongoDB and run:

   docker exec -it mongodb /bin/bash
   

   Inside container (change):

   mongo mongodb://$MONGO_INITDB_ROOT_USERNAME:$MONGO_INITDB_ROOT_PASSWORD@mongodb:27017/admin?gssapiServiceName=mongodb
   use admins
   

   Check the last two/N records in adjacency changes (adj_change) or cost changes (cost_change)

   db.adj_change.find({}).sort({_id: -1}).limit(2)
   db.cost_change.find({}).sort({_id: -1}).limit(2)
   

   Note
   If you see a single event in docker logs logstash it means that mongoDB output is blocked, check if you have a connection to MongoDB docker exec -it logstash curl -v mongodb:27017

Development

Logstach pipeline development. Start logstash container

[ospf-watcher]# docker run -it --rm --network=topolograph_backend --env-file=./.env -v ./logstash/pipeline:/usr/share/logstash/pipeline -v ./logstash/config:/usr/share/logstash/config ospfwatcher_watcher:latest /bin/bash

Inside container run this command:

bin/logstash

It will expect watcher's log file change, so add new log (copy and paste this line) into ./watcher/logs/watcher#-gre#-ospf.ospf.log file

2023-01-01T00:00:00Z,watcher-local,network,10.1.14.0/24,changed,old_cost:10,new_cost:123,10.1.1.4,01Jan2023_00h00m00s_7_hosts,0.0.0.0,12345,internal,0

The output should be:

[INFO ] 2024-05-13 21:15:25.462 [[main]-pipeline-manager] javapipeline - Pipeline started {"pipeline.id"=>"main"}
The stdin plugin is now waiting for input:
[INFO ] 2024-05-13 21:15:25.477 [Agent thread] agent - Pipelines running {:count=>1, :running_pipelines=>[:main], :non_running_pipelines=>[]}
2023-01-01T00:00:00Z,watcher-local,network,10.1.14.0/24,changed,old_cost:10,new_cost:123,10.1.1.4,01Jan2023_00h00m00s_7_hosts,0.0.0.0,12345,internal,0
{
                            "graph_time" => "01Jan2023_00h00m00s_7_hosts",
                     "event_detected_by" => "10.1.1.4",
                           "subnet_type" => "internal",
                        "int_ext_subtype"=> "0",
                                   "asn" => "12345",
                          "watcher_name" => "demo-watcher",
                          "watcher_time" => "2023-01-01T00:00:00Z",
                            "@timestamp" => 2024-05-13T21:15:50.628Z,
                              "old_cost" => "10",
                              "@version" => "1",
                                  "host" => "ba8ff3ab31f8",
                            "event_name" => "network",
                              "new_cost" => "123",
                          "event_object" => "10.1.14.0/24",
                          "event_status" => "changed"
}

Add your changes in ./logstash/pipeline file, stop logstash process via CTRL+C bin/logstash and start it again. Add the same log in the watcher's log file and check how logstash works with your new changes.

Minimum version

Logstash

7.17.21, this version includes bug fix of issues_281, issues_5115

scapy

2.5.0 works, 2.6.0 raises an exception

Topolograph suite

• OSPF Watcher link
• IS-IS Watcher link
• Topolograph link
• Topolograph in docker link

Community & feedback

• https://t.me/topolograph
• admin at topolograph.com

License

GPL-3.0 license Elastic search was used with Basic ELK license.