Skip to content

First Things

Jump to bottom Edit New page
Defragster edited this page Mar 18, 2020 · 15 revisions
  • All Teensy boards are factory tested and loaded with a simple BLINK sketch before packaged
  • As shipped this sketch is not USB Serial active and will not present as such on connecting to PC
  • The first programming of a Teensy board takes a Button Press
  • The Button on the Teensy is to enter Program mode, it is not a Reset button
  • Pressing the Button puts the Teensy into a HID mode to present a link to program the Teensy
  • Reference cards can be found here https://www.pjrc.com/teensy/pinout.html

Early Teensy 1 and 2 are of 8 bit AVR type microcontrollers

Current Teensy boards use 32 bit ARM microcontrollers

Includes Teensy :: LC, 3.2, 3.5, 3.6 and 4.0

Teensy is a PJRC trademark. Notes here are for reference and will typically refer to the ARM variants unless noted.

Home

Basics
Connectivity
PC Communication
Displays
Timing, delays and clocks
Audio & MIDI
Libraries
Compiling, Languages & Uploading
Debugging
Electronics
Fun stuff
HowTo's

FAQ

Clone this wiki locally