Skip to content

Files

Latest commit

 

History

History
132 lines (100 loc) · 5.63 KB

plugins.md

File metadata and controls

132 lines (100 loc) · 5.63 KB

Plugins

MIDI CC Map X4

Map a single input CC to up to four output CCs.

MIDI CC Map X4 screenshot

  • Can act on a selected CC received on all MIDI channels or a specific one.
  • Converts the matching source Control Change message into up-to-four destination CCs.
  • Each of the four destination CCs can be enabled separately and the following settings can be set for each (where X = 1..4):

    • CC X Mode - Enable destination CC X and set the control value mapping mode.

    • CC X Destination - the controller number

    • CC X Channel - the MIDI channel

    • CC X Filter repeated values - when enabled, if the control value (after conversion) of the destination Control Change message is the same as the one sent before (for this channel and controller number), it is supressed.

    • CC X Start and CC X End - the value range of the source Control Change message, which gets converted into this destination CC.

      If Start > End, only messages, whose controller values lie outside of the range End .. Start, are converted.

    • CC X Minimum value and CC X maximum value - the value range of the destination Control Change message to which the range of the source values is mapped.

      If Minimum > Maximum, the destination value range is inverted.

  • Any unmatched Control Change messages or other events are kept in the plugin's output.
  • The original source Control Change messages can be optionally kept in the plugin's output too (useful, for example, to cascade several instances of this plugin).

MIDI CC Recorder

Store received Control Change messages and replay them when triggered.

Note: This plugin is still considered to be in beta stage. I recommend not using it in an important project. The LV2 version should work as described, but there may be issues with the VST2 version due to poor support for trigger inputs.

MIDI CC Recorder screenshot

  • While "Record" is enabled, the plugin stores the last seen value of each Control Change message on each MIDI channel sent to its input.
  • When the "Send" trigger input is activated, all stored Control Change messages on the channel selected with "Send Channel" are sent to its output.
  • Sending can also be triggered when the transport state of the host changes to "playing", optionally only when the transport position is zero.
  • Lastly, sending can be triggered when receiving a selected MIDI Program Change event. There are parameters to set the program number and the MIDI channel of the PC event, which will trigger sending, when received.
  • If "Send Channel" is set to "All", all stored Control Change messages on all channels are sent.
  • The interval between sending each Control Change event can be set to between 1 and 200 milliseconds.
  • While sending is in progress, all send triggers are ignored.
  • While sending is in progress, no new Control Change messages are stored and Control Change messages received on the "Send Channel" are not passed through to the output.
  • When the "Clear" trigger input is activated, all stored Control Change messages are cleared.
  • The plugin state including all stored Control Change messages will be stored by the host and, if the host supports it, will be restored with the host session or when a preset is loaded.

MIDI CC to Pressure

Convert Control Change messages into (monophonic) Channel Pressure (Aftertouch).

MIDI CC to Pressure screenshot

  • Can act on all MIDI channels or a specific one.
  • Configurable source controller number (0-127): modulation, breath, foot controller, expression, etc.
  • Any unconverted messages are kept in the plugin's output.
  • Original source Control Change messages can be optionally kept as well (useful, for example, to cascade other plugins handling the same CC after this plugin).

MIDI PB to CC

Convert Pitch Bend into Control Change messages.

MIDI PB to CC screenshot

  • Can act on all MIDI channels or a specific one.
  • Supports different destination Control Change numbers for positive (CC A) and negative (CC B) Pitch Bend range.
  • Affected input Pitch Bend value range can be set, allowing, for example, to convert only positive Pitch Bend values. If PB min. value is higher than PB max. value, then only Pitch Bend values outside of the range are converted.
  • Allows to set the output value range for the Control Change messages. Positive Pitch Bend values within the input range set with PB min. value and PB max. value are mapped to the range set with CC A min. value and CC A max. value, negative Pitch Bend values within the input range are mapped to the range set with CC B min. value and CC B max. value.
  • Any unconverted messages are kept in the plugin's output.
  • Original Pitch Bend messages in the input range can be optionally kept as well (useful, for example, to cascade several instances of this plugin).

MIDI Pressure to CC

Convert (monophonic) Channel Pressure (Aftertouch) into Control Change messages.

MIDI Pressure to CC screenshot

  • Can act on all MIDI channels or a specific one.
  • Configurable destination controller number (0-127): modulation, breath, foot controller, expression, etc.
  • Any unconverted messages are kept in the plugin's output.
  • Original Channel Pressure messages can be optionally kept as well (useful, for example, to cascade several instances of this plugin).

MIDI Sys Filter

Filter out MIDI System Messages.

MIDI Sys Filter screenshot