Skirt height is enforced to 1 for By object printing with no option to disable

[maxim-kukushkin]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.1.1

Operating System (OS)

Linux

OS Version

Arch Linux

Additional system information

No response

Printer

Voron Trident

How to reproduce

Select Others -> Special Mode -> Print Sequence -> By object
Try to set Others -> Skirt -> Skirt height to anything above 1

Actual results

The below warning message appears and the skirt height is forcibly reset to 1

Expected results

As the message states, there's a chance of collision, not a guarantee
The message must be just a warning, maybe an exclamation mark next to the setting. It must not enforce any settings.

The user knows their printer better, the user sees how it prints and the user knows better which settings are acceptable.

In my case it was printing like this before, I didn't have any collisions. I also know the clearance of my nozzle enough to judge. I'm also experienced enough to check the sliced view and evaluate.

The slicer must not be opinionated, especially as there's no way for it to protect the printing from everything. There're many other ways to perform incorrect settings and ruin the printing. This one is not even fatal (what will happen even if the nozzle collides with a 2-3 layer skirt? Most probably nothing).

Project file & Debug log uploads

klein-bottle_v2_small.zip
debug_Sat_Jan_04_21_55_12_2487.log.0.zip

Checklist of files to include

• Log file
• Project file

Anything else?

The reason this is reported as a bug, is because it's incorrect that the slicer is selectively opinionated about a specific setting and doesn't let the user decide
It also prevents user form performing correct setting which work for them

[maxim-kukushkin]

Additionally, it also enforces skirt height with print By Object, even if the objects are far away from each other and even if there's only one object on the build plate