Major unsupported zone that ruins the print is not reported as a serious issue

[ZoomDomain]

Is there an existing issue for this problem?

• I have searched the existing issues

OrcaSlicer Version

2.1.1

Operating System (OS)

Windows

OS Version

win 10

Additional system information

amd 2950

Printer

elegoo neptune 4 pro

How to reproduce

OKIx gbot x axis planets inversed stl.zip
Please rotate this stl upside down 180 degrees, and use a layer width of about 3.2, the support bridges are too thin so they print nothing, then a cylinder is printed in mid-air in the central zone starting from 50% of the gcode/z axis.

complex scad file manually re-arranged mesh editing so has central zone that required support, was struggling with seam tests and forgot supports on a re-run.

Actual results

There is no warnign, no yellow box, and as I was also testing lots of options I was overloaded with info and failed to see the floating piece. The gcode prints with a floating object in thin air so all the filament falls down and gets stuck to other zones of the print.

Expected results

a yellow box should appear with the message "unsupported floating zone is found, no objects are nearby to the seam start position". Thanks!

Project file & Debug log uploads

floating central zone at 50pc z because of bridge invisibility.zip

Checklist of files to include

• Log file
• Project file

Anything else?

The bridge at 50 percent of z axis was too thin to be included in the gcode, although it's 2mm/7.0 high bridge, so 0.28mm, and the layer height was 3.2mm, and I can't find a way to detect the bridge.

[github-actions]

Orca bot: this issue is stale because it has been open for 90 days with no activity.