README.md

LED-Matrix-16x16

A 16x16 RGB LED Matrix controlled by DMX over wifi

Some facts:

• 256 RGB LEDs
• 768 DMX Channels
• Teensy 3.6 as Main Controller
• ESP8266 as ArtNet Node
• 3 TLC5940s for controlling brightness
• 2 74CH595 Shift Registers for multiplexing

History

So, this is the second LED Matrix we are building. The first one was a bit smaller (10x10) and used shift registers only for controlling the LEDs. We weren't that happy about the limitation we got using shift registers only. We ran into refresh rate problems while trying to increase possible grayscale values. We ended up with 8bit grayscale (0-255).

The plan

So the basic data flow should look like this

Schematic

How multiplexing works

This are some images explaining how multiplexing with a LED Matrix works

The images are from this instrucable. There you can also find more information on multiplexing:

The building process

So after some weekends of soldering 4 wires to every single SMD LED we finally made it.

Lets start soldering them on the frame...

After dozen weekends spend soldering we made it

First testing

As you can see. It works! :) But there are some LEDs that need to be fixed

DMX

Using ArtNet Node running on an ESP8266. See this awesome project.