Merge tag 'v7.1-rc6' into usb-next

We need the USB and Thunderbolt fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Author: gregkh

.mailmap

@@ -263,8 +263,9 @@ Enric Balletbo i Serra <eballetbo@kernel.org> <enric.balletbo@collabora.com>
 Enric Balletbo i Serra <eballetbo@kernel.org> <eballetbo@iseebcn.com>
 Erik Kaneda <erik.kaneda@intel.com> <erik.schmauss@intel.com>
 Ethan Carter Edwards <ethan@ethancedwards.com> Ethan Edwards <ethancarteredwards@gmail.com>
-Eugen Hristev <eugen.hristev@linaro.org> <eugen.hristev@microchip.com>
-Eugen Hristev <eugen.hristev@linaro.org> <eugen.hristev@collabora.com>
+Eugen Hristev <ehristev@kernel.org> <eugen.hristev@microchip.com>
+Eugen Hristev <ehristev@kernel.org> <eugen.hristev@linaro.org>
+Eugen Hristev <ehristev@kernel.org> <eugen.hristev@collabora.com>
 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> <ezequiel@collabora.com>
 Faith Ekstrand <faith.ekstrand@collabora.com> <jason@jlekstrand.net>
@@ -339,6 +340,7 @@ Henrik Rydberg <rydberg@bitmath.org>
 Herbert Xu <herbert@gondor.apana.org.au>
 Huacai Chen <chenhuacai@kernel.org> <chenhc@lemote.com>
 Huacai Chen <chenhuacai@kernel.org> <chenhuacai@loongson.cn>
+Ian Ray <ian.ray@gehealthcare.com> <ian.ray@ge.com>
 Ignat Korchagin <ignat@linux.win> <ignat@cloudflare.com>
 Igor Korotin <igor.korotin@linux.dev> <igor.korotin.linux@gmail.com>
 Ike Panhc <ikepanhc@gmail.com> <ike.pan@canonical.com>
@@ -584,6 +586,8 @@ Mayuresh Janorkar <mayur@ti.com>
 Md Sadre Alam <quic_mdalam@quicinc.com> <mdalam@codeaurora.org>
 Miaoqing Pan <quic_miaoqing@quicinc.com> <miaoqing@codeaurora.org>
 Michael Buesch <m@bues.ch>
+Michal Grzeschik <mgr@kernel.org> <m.grzeschik@pengutronix.de>
+Michal Grzeschik <mgr@kernel.org> <mgr@pengutronix.de>
 Michael Riesch <michael.riesch@collabora.com> <michael.riesch@wolfvision.net>
 Michal Simek <michal.simek@amd.com> <michal.simek@xilinx.com>
 Michel Dänzer <michel@tungstengraphics.com>
@@ -857,6 +861,7 @@ Tobias Klauser <tklauser@distanz.ch> <klto@zhaw.ch>
 Tobias Klauser <tklauser@distanz.ch> <tklauser@nuerscht.ch>
 Tobias Klauser <tklauser@distanz.ch> <tklauser@xenon.tklauser.home>
 Todor Tomov <todor.too@gmail.com> <todor.tomov@linaro.org>
+Tomasz Jeznach <tomasz.jeznach@linux.dev> <tjeznach@rivosinc.com>
 Tony Luck <tony.luck@intel.com>
 Trilok Soni <quic_tsoni@quicinc.com> <tsoni@codeaurora.org>
 TripleX Chung <xxx.phy@gmail.com> <triplex@zh-kernel.org>

Documentation/.renames.txt

@@ -786,6 +786,7 @@ networking/altera_tse networking/device_drivers/ethernet/altera/altera_tse
 networking/bpf_flow_dissector bpf/prog_flow_dissector
 networking/cxacru networking/device_drivers/atm/cxacru
 networking/defza networking/device_drivers/fddi/defza
+networking/device_drivers/3com/3c509 networking/device_drivers/ethernet/3com/3c509
 networking/device_drivers/3com/vortex networking/device_drivers/ethernet/3com/vortex
 networking/device_drivers/amazon/ena networking/device_drivers/ethernet/amazon/ena
 networking/device_drivers/aquantia/atlantic networking/device_drivers/ethernet/aquantia/atlantic

Documentation/admin-guide/kernel-parameters.txt

@@ -789,24 +789,6 @@ Kernel parameters
 	cio_ignore=	[S390]
 			See Documentation/arch/s390/common_io.rst for details.
 
-	clearcpuid=X[,X...] [X86]
-			Disable CPUID feature X for the kernel. See
-			arch/x86/include/asm/cpufeatures.h for the valid bit
-			numbers X. Note the Linux-specific bits are not necessarily
-			stable over kernel options, but the vendor-specific
-			ones should be.
-			X can also be a string as appearing in the flags: line
-			in /proc/cpuinfo which does not have the above
-			instability issue. However, not all features have names
-			in /proc/cpuinfo.
-			Note that using this option will taint your kernel.
-			Also note that user programs calling CPUID directly
-			or using the feature without checking anything
-			will still see it. This just prevents it from
-			being used by the kernel or shown in /proc/cpuinfo.
-			Also note the kernel might malfunction if you disable
-			some critical bits.
-
 	clk_ignore_unused
 			[CLK]
 			Prevents the clock framework from automatically gating

Documentation/admin-guide/laptops/uniwill-laptop.rst

@@ -43,6 +43,11 @@ Support for changing the platform performance mode is currently not implemented.
 Battery Charging Control
 ------------------------
 
+.. warning:: Some devices do not properly implement the charging threshold interface. Forcing
+             the driver to enable access to said interface on such devices might damage the
+             battery [1]_. Because of this the driver will not enable said feature even when
+             using the ``force`` module parameter.
+
 The ``uniwill-laptop`` driver supports controlling the battery charge limit. This happens over
 the standard ``charge_control_end_threshold`` power supply sysfs attribute. All values
 between 1 and 100 percent are supported.
@@ -70,3 +75,8 @@ The ``uniwill-laptop`` driver allows to set the configurable TGP for devices wit
 allow it.
 
 See Documentation/ABI/testing/sysfs-driver-uniwill-laptop for details.
+
+References
+==========
+
+.. [1] https://www.reddit.com/r/XMG_gg/comments/ld9yyf/battery_limit_hidden_function_discovered_on/

Documentation/admin-guide/pm/amd-pstate.rst

@@ -358,9 +358,9 @@ Dynamic energy performance profile
 The amd-pstate driver supports dynamically selecting the energy performance
 profile based on whether the machine is running on AC or DC power.
 
-Whether this behavior is enabled by default depends on the kernel
-config option `CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP`. This behavior can also be overridden
-at runtime by the sysfs file ``/sys/devices/system/cpu/cpufreq/policyX/dynamic_epp``.
+Whether this behavior is enabled by default depends on the kernel command line option
+``amd_dynamic_epp`` is set. This behavior can also be overridden
+at runtime by the sysfs file ``/sys/devices/system/cpu/amd_pstate/dynamic_epp``.
 
 When set to enabled, the driver will select a different energy performance
 profile when the machine is running on battery or AC power. The driver will
@@ -485,9 +485,8 @@ kernel parameter ``amd_prefcore=disable``.
 ``amd_dynamic_epp``
 
 When AMD pstate is in auto mode, dynamic EPP will control whether the kernel
-autonomously changes the EPP mode. The default is configured by
-``CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP`` but can be explicitly enabled with
-``amd_dynamic_epp=enable`` or disabled with ``amd_dynamic_epp=disable``.
+autonomously changes the EPP mode. The default is disabled. It can be enabled
+with the kernel parameter ``amd_dynamic_epp=enable``.
 
 User Space Interface in ``sysfs`` - General
 ===========================================

Documentation/admin-guide/pm/intel_pstate.rst

@@ -355,11 +355,12 @@ HyperThreading (HT) in the context of Intel processors, is enabled on at least
 one core, ``intel_pstate`` assigns performance-based priorities to CPUs.  Namely,
 the priority of a given CPU reflects its highest HWP performance level which
 causes the CPU scheduler to generally prefer more performant CPUs, so the less
-performant CPUs are used when the other ones are fully loaded.  However, SMT
-siblings (that is, logical CPUs sharing one physical core) are treated in a
-special way such that if one of them is in use, the effective priority of the
-other ones is lowered below the priorities of the CPUs located in the other
-physical cores.
+performant CPUs are used when the other ones are fully loaded.  SMT siblings
+(that is, logical CPUs sharing one physical core) are given the same priority.
+The scheduler can pull tasks from lower-priority cores and place them on any
+sibling.  Since the scheduler spreads tasks among physical cores, tasks will be
+placed on the SMT siblings of physical cores only after all physical cores are
+busy.
 
 This approach maximizes performance in the majority of cases, but unfortunately
 it also leads to excessive energy usage in some important scenarios, like video

Documentation/arch/riscv/cmodx.rst

@@ -21,13 +21,13 @@ call at each patchable function entry, and patches it dynamically at runtime to
 enable or disable the redirection. In the case of RISC-V, 2 instructions,
 AUIPC + JALR, are required to compose a function call. However, it is impossible
 to patch 2 instructions and expect that a concurrent read-side executes them
-without a race condition. This series makes atmoic code patching possible in
+without a race condition. This series makes atomic code patching possible in
 RISC-V ftrace. Kernel preemption makes things even worse as it allows the old
 state to persist across the patching process with stop_machine().
 
 In order to get rid of stop_machine() and run dynamic ftrace with full kernel
 preemption, we partially initialize each patchable function entry at boot-time,
-setting the first instruction to AUIPC, and the second to NOP. Now, atmoic
+setting the first instruction to AUIPC, and the second to NOP. Now, atomic
 patching is possible because the kernel only has to update one instruction.
 According to Ziccif, as long as an instruction is naturally aligned, the ISA
 guarantee an  atomic update.
@@ -36,8 +36,8 @@ By fixing down the first instruction, AUIPC, the range of the ftrace trampoline
 is limited to +-2K from the predetermined target, ftrace_caller, due to the lack
 of immediate encoding space in RISC-V. To address the issue, we introduce
 CALL_OPS, where an 8B naturally align metadata is added in front of each
-pacthable function. The metadata is resolved at the first trampoline, then the
-execution can be derect to another custom trampoline.
+patchable function. The metadata is resolved at the first trampoline, then the
+execution can be directed to another custom trampoline.
 
 CMODX in the User Space
 -----------------------

Documentation/arch/riscv/zicfilp.rst

@@ -78,7 +78,7 @@ the program.
 
 Per-task indirect branch tracking state can be monitored and
 controlled via the :c:macro:`PR_GET_CFI` and :c:macro:`PR_SET_CFI`
-``prctl()` arguments (respectively), by supplying
+``prctl()`` arguments (respectively), by supplying
 :c:macro:`PR_CFI_BRANCH_LANDING_PADS` as the second argument.  These
 are architecture-agnostic, and will return -EINVAL if the underlying
 functionality is not supported.

Documentation/arch/x86/cpuinfo.rst

@@ -187,6 +187,10 @@ to disable features using the feature number as defined in
 Protection can be disabled using clearcpuid=514. The number 514 is calculated
 from #define X86_FEATURE_UMIP (16*32 + 2).
 
+DO NOT USE this cmdline option in production - it is meant to be used only as
+a quick'n'dirty debugging aid to rule out a feature-enabling code is the
+culprit. If you use it, it'll taint the kernel.
+
 In addition, there exists a variety of custom command-line parameters that
 disable specific features. The list of parameters includes, but is not limited
 to, nofsgsbase, nosgx, noxsave, etc. 5-level paging can also be disabled using

Documentation/crypto/krb5.rst

@@ -158,13 +158,22 @@ returned.
 When a message has been received, the location and size of the data with the
 message can be determined by calling::
 
-	void crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5,
-					   enum krb5_crypto_mode mode,
-					   size_t *_offset, size_t *_len);
+	int crypto_krb5_where_is_the_data(const struct krb5_enctype *krb5,
+					  enum krb5_crypto_mode mode,
+					  size_t *_offset, size_t *_len);
 
 The caller provides the offset and length of the message to the function, which
 then alters those values to indicate the region containing the data (plus any
-padding).  It is up to the caller to determine how much padding there is.
+padding).  It is up to the caller to determine how much padding there is.  The
+function returns an error if the length is too small or if the mode is
+unsupported.  An additional function::
+
+	int crypto_krb5_check_data_len(const struct krb5_enctype *krb5,
+				       enum krb5_crypto_mode mode,
+				       size_t len, size_t min_content);
+
+is provided to just do a basic check that the decrypted/verified message would
+have a sufficient minimum payload.
 
 Preparation Functions
 ---------------------