fed my TS80P with 20V istead of 12V

[discip]

Unfortunately I did what is stated in the header.

Since I can't remember what values the Iron displayed prior to overcharging it, I need someones help at figuring out if I should get replacement parts for it, or if everything is still fine.

I am reading:

	value
Tip Res	4.5
Tip R	1452
Tip O	1554

What values does your TS80P give you with the TS-B02 tip after calibration?

Thanks in advance
kind regards

[KoopsF]

Where can I find these values? I found RTip and CTip in the detailed menu by holding the second button.

[discip]

Good morning,
first of all: Thank you for trying to help me. 😊
Yes that's the right place to look for, but you are using an 'older' version of IronOS where Tip O is not present.

If you don't mind, you could flash this one: latest
Please follow this guide to calibrate the iron: Calibrate CJC

thanks in advance

[KoopsF]

alright, the values I get are:
Tip Res = 4.5
Tip R = jumps around 1650
Tip O =1431

[discip]

Thank you!
Did you use the TS-B02 tip?

[KoopsF]

Yes

[discip]

@Ralim
Can you please help me figure out how to check which component is broken?

[Ralim]

Your Tip R and Tip O values look fairly normal.
Is it misbehaving?

[discip]

Yes it is.
Prior to this incident the external measured temperature was almost spot on (never above the desired temp), whereas after that it does overshoot iirc by almost 10°C.

[Ralim]

Is it measuring correctly at rest?
If its just overshooting at higher temps it could be tip damage or the op-amp.

[discip]

I'll have to wait for a hopefully more reliable meter to arrive.
Will report as soon as possible.