svd2rust: update to v0.35.0

Author: tones111

.github/workflows/ci.yml

@@ -26,10 +26,10 @@ jobs:
         id: cache-cargo
         with:
           path: ~/cargo-bin
-          key: rust-tools-20250106-001
+          key: rust-tools-20250111-001
       - name: Install svd2rust
         if: steps.cache-cargo.outputs.cache-hit != 'true'
-        run: cargo install svd2rust --version 0.28.0 --locked
+        run: cargo install svd2rust --version 0.35.0 --locked
       - name: Install cargo-form
         if: steps.cache-cargo.outputs.cache-hit != 'true'
         run: cargo install form --version 0.8.0 --locked
@@ -53,12 +53,12 @@ jobs:
       - name: Install Nightly Rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
-          toolchain: nightly-2023-08-08
+          toolchain: nightly-2025-01-10
           components: rustfmt
 
       # Actual test run
       - name: Generate chip description sources
-        run: make RUSTUP_TOOLCHAIN=nightly-2023-08-08
+        run: make RUSTUP_TOOLCHAIN=nightly-2025-01-10
       - name: Test-compile the crate
         run: cargo check --all-features
 
@@ -86,7 +86,7 @@ jobs:
       - name: Install Rust
         uses: actions-rust-lang/setup-rust-toolchain@v1
         with:
-          toolchain: nightly-2023-12-28
+          toolchain: nightly-2025-01-10
           components: rust-src,rustfmt
       - name: Install AVR gcc, binutils, and libc
         run: sudo apt-get install -y avr-libc binutils-avr gcc-avr

README.md

@@ -40,10 +40,10 @@ Via the feature you can select which chip you want the register specifications f
 ## Build Instructions
 The version on `crates.io` is pre-built.  The following is only necessary when trying to build this crate from source.
 
-You need to have [atdf2svd][] (= 0.5.0), [svd2rust][] (= 0.28), [form][] (>= 0.8), [rustfmt][](for the *nightly* toolchain) and [svdtools][] (= 0.4.0) installed:
+You need to have [atdf2svd][] (= 0.5.0), [svd2rust][] (= 0.35.0), [form][] (>= 0.8), [rustfmt][](for the *nightly* toolchain) and [svdtools][] (= 0.4.0) installed:
 ```bash
 cargo install atdf2svd --version 0.5.0 --locked
-cargo install svd2rust --version 0.28.0 --locked
+cargo install svd2rust --version 0.35.0 --locked
 cargo install form
 rustup component add --toolchain nightly rustfmt
 cargo install svdtools --version 0.4.0 --locked

examples/atmega328p/Cargo.toml

@@ -18,7 +18,7 @@ embedded-hal = "0.2.3"
 
 
 [dependencies.avr-device]
-version = "0.5.3"
+version = "0.7"
 # To use the local version of avr-device instead, uncomment the following line:
 # NB: make sure to build this crate first by running `make` at the root of the project
 # path = "../.."

examples/atmega328p/src/main.rs

@@ -26,9 +26,9 @@ fn panic(_info: &core::panic::PanicInfo) -> ! {
 
     loop {
         avr_device::asm::delay_cycles(1_000_000);
-        dp.PORTD.portd.write(|w| w.pd3().set_bit());
+        dp.portd.portd().write(|w| w.pd3().set_bit());
         avr_device::asm::delay_cycles(1_000_000);
-        dp.PORTD.portd.write(|w| w.pd3().clear_bit());
+        dp.portd.portd().write(|w| w.pd3().clear_bit());
     }
 }
 
@@ -59,14 +59,14 @@ fn main() -> ! {
     // will be written value + the modified bits
 
     // Divide by 1024 -> 16MHz/1024 = 15.6kHz
-    dp.TC0.tccr0b.write(|w| w.cs0().prescale_1024());
+    dp.tc0.tccr0b().write(|w| w.cs0().prescale_1024());
     // Enable overflow interrupts
-    dp.TC0.timsk0.write(|w| w.toie0().set_bit());
+    dp.tc0.timsk0().write(|w| w.toie0().set_bit());
 
     // Make pd2 and pd3 outputs
     // We use .modify() in order not to change the other bits
-    dp.PORTD.ddrd.modify(|_, w| w.pd2().set_bit());
-    dp.PORTD.ddrd.modify(|_, w| w.pd3().set_bit());
+    dp.portd.ddrd().modify(|_, w| w.pd2().set_bit());
+    dp.portd.ddrd().modify(|_, w| w.pd3().set_bit());
 
     // SAFETY: We can enable the interrupts here as we are not inside
     // a critical section.
@@ -82,7 +82,7 @@ fn main() -> ! {
             led_state = LED_STATE.borrow(cs).get();
         });
 
-        dp.PORTD.portd.modify(|_, w| w.pd2().bit(led_state));
+        dp.portd.portd().modify(|_, w| w.pd2().bit(led_state));
 
         // We want to make the program crash after 9 blinks
         if previous_state != led_state {